Home

Awesome

lmdbx-js

license npm version get put

lmdbx-js is an ultra-fast interface to libmdbx, which is derived from LMDB. This package provides an extremly fastest and most efficient NodeJS key-value/database interface that exists for full storage and retrieval of structured JS data (objects, arrays, etc.) in a true persisted, scalable, ACID-compliant, database. It provides a simple interface for interacting with libmdbx, as a key-value store, that makes it easy to properly leverage the power, crash-proof design, and efficiency of libmdbx using intuitive JavaScript, and is designed to scale across multiple processes or threads. lmdbx-js offers several key features that make it idiomatic, highly performant, and easy to use libmdbx efficiently:

This library is branched from lmdb-js, and is maintained alongside lmdb-js, but adapted for libmdbx. libmdbx provides some important improvements over LMDB; in particular, it offers significantly better management and collection of free-space (which can sometimes be a problem with LMDB). There are a number of additional features available libmdbx, that maybe be exposed in lmdbx-js at some point, as well.

However, there are only a few reasons for remaining with the core LMDB/lmdb-js package/project:

This library is published to the NPM package lmdbx (the 0.1.x versions were published to lmdbx-store), and can be installed with: npm install lmdbx Or in Deno can be directly used from the deno.land lmdbx module (see Deno instructions).

This library has minimal, tightly-controlled, and maintained dependencies to ensure stability, security, and efficiency. It supports both native ESM and CJS usage.

Design

This library handles translation of JavaScript values, primitives, arrays, and objects, to and from the binary storage of libmdbx keys and values with highly optimized native C++ code for breakneck performance. It supports multiple types of JS values for keys and values, making it easy to use idiomatic JS for storing and retrieving data in libmdbx.

lmdbx-js is designed for synchronous reads, and asynchronous writes. In idiomatic NodeJS code, I/O operations are performed asynchronously. libmdbx is a memory-mapped database, reading and writing within a transaction does not use any I/O (other than the slight possibility of a page fault), and can usually be performed faster than Node's event queue callbacks can even execute, and it is easier to write code for instant synchronous values from reads. On the otherhand, commiting transactions does involve I/O, and vastly higher throughput can be achieved by batching operations and executing on a separate thread. Consequently, lmdbx-js is designed for transactions to go through this asynchronous batching process and return a simple promise that resolves once data is written and flushed to disk.

With the default sync'ing configuration, libmdbx has a crash-proof design; a machine can be turned off at any point, and data can not be corrupted unless the written data is actually changed or tampered. Writing data and waiting for confirmation that has been writted to the physical medium is critical for data integrity, but is well known to have latency (although not necessarily less efficient). However, by batching writes, when a database is under load, slower transactions enable more writes per transaction, and this library is able to drive libmdbx to achieve the maximum levels of throughput with fully sync'ed operations, preserving both the durability/safety of the transactions and legendary performance.

This library supports and encourages the use of conditional writes; this allows for atomic operations that are dependendent on previously read data, and most transactional types of operations can be written with an optimistic-locking based, atomic-conditional-write pattern. This allows this library to delegate writes to off-thread execution, and scale to handle concurrent execution across many processes or threads while maintaining data integrity.

This library automatically handles automatically database growth, expanding file size with a smart heuristic that minimizes file fragmentation (as you would expect from a database).

This library provides optional compression using LZ4 that works in conjunction with the asynchronous writes by performing the compression in the same thread (off the main thread) that performs the writes in a transaction. LZ4 is extremely fast, and decompression can be performed at roughly 5GB/s, so excellent storage efficiency can be achieved with almost negligible performance impact.

Usage

An libmdbx database instance is created by using open export from the main module:

import { open } from 'lmdbx'; // or require
// or in deno: import { open } from 'https://deno.land/x/lmdbx/mod.ts';
let myDB = open({
	path: 'my-db',
	// any options go here, we can turn on compression like this:
	compression: true,
});
await myDB.put('greeting', { someText: 'Hello, World!' });
myDB.get('greeting').someText // 'Hello, World!'
// or
myDB.transaction(() => {
	myDB.put('greeting', { someText: 'Hello, World!' });
	myDB.get('greeting').someText // 'Hello, World!'
});

(see database options below for more options)

Once you have opened a database, you can store and retrieve values using keys:

Values

You can store a wide variety of JavaScript values and data structures in this library, including objects (with arbitrary complexity), arrays, buffers, strings, numbers, etc. in your database. Even full structural cloning (with cycles) is an optionally supported. Values are stored and retrieved according the database encoding, which can be set using the encoding property on the database options. By default, data is stored using MessagePack, but there are several supported encodings:

In addition, you can use asBinary to directly store a buffer or Uint8Array as a value, bypassing any encoding.

Keys

When using the various APIs, keys can be any JS primitive (string, number, boolean, symbol), an array of primitives, or a Buffer. Using the default ordered-binary conversion, primitives are translated to binary keys used by libmdbx in such a way that consistent ordering is preserved. Numbers are ordered naturally, which come before strings, which are ordered lexically. The keys are stored with type information preserved. The getRangeoperations that return a set of entries will return entries with the original JS primitive values for the keys. If arrays are used as keys, they are ordering by first value in the array, with each subsequent element being a tie-breaker. Numbers are stored as doubles, with reversal of sign bit for proper ordering plus type information, so any JS number can be used as a key. For example, here are the order of some different keys:

null // lowest possible value
Symbol.for('even symbols')
-10 // negative supported
-1.1 // decimals supported
400
3E10
'Hello'
['Hello', 'World']
'World'
'hello'
['hello', 1, 'world']
['hello', 'world']
Buffer.from([255]) // buffers can be used directly, 255 is higher than any byte produced by primitives

You can override the default encoding of keys, and cause keys to be returned as binary arrays (Buffers in NodeJS) using the keyEncoding: 'binary' database option (generally slower), use keyEncoding: 'uint32' for keys that are strictly 32-bit unsigned integers, or provide a custom key encoder/decoder with keyEncoder (see custom key encoding).

Once you created have a db, the following methods are available:

db.get(key): any

This will retrieve the value at the specified key. The key must be a JS value/primitive as described above, and the return value will be the stored data (dependent on the encoding), or undefined if the entry does not exist.

db.getEntry(key): any

This will retrieve the the entry at the specified key. The key must be a JS value/primitive as described above, and the return value will be the stored entry, or undefined if the entry does not exist. An entry is object with a value property for the value in the database (as returned by db.get), and a version property for the version number of the entry in the database (if useVersions is enabled for the database).

db.put(key, value, version?: number, ifVersion?: number): Promise<boolean>

This will store the provided value/data at the specified key. If the database is using versioning (see options below), the version parameter will be used to set the version number of the entry. If the ifVersion parameter is set, the put will only occur if the existing entry at the provided key has the version specified by ifVersion at the instance the commit occurs (libmdbx commits are atomic by default). If the ifVersion parameter is not set, the put will occur regardless of the previous value.

This operation will be enqueued to be written in a batch transaction. Any other operations that occur within the current event turn (until next event after I/O by default) will also occur in the same transaction. This will return a promise for the completion of the put. The promise will resolve once the transaction has finished committing. The resolved value of the promise will be true if the put was successful, and false if the put did not occur due to the ifVersion not matching at the time of the commit. Once the promise resolves, the transaction will have been fully written to the physical storage medium (durable commit, guaranteed available in the future as far as the OS/physical storage can permit and confirm, even if there is power loss or system crash).

If put is called inside a transaction, the put will be executed immediately in the current transaction.

db.remove(key, valueOrIfVersion?: number): Promise<boolean>

This will delete the entry at the specified key. This functions like put, with the same optional conditional version. This is batched along with put operations, and returns a promise indicating the success of the operation. If you are using a database with duplicate entries per key (with dupSort flag), you can specify the value to remove as the second parameter (instead of a version).

Again, if this is performed inside a transation, the removal will be performed in the current transaction.

db.transaction(callback: Function): Promise

This will run the provided callback in a transaction, asynchronously starting the transaction, then running the callback, then later committing the transaction. By running within a transaction, the code in the callback can perform multiple database operations atomically and isolated (fully ACID compliant). Any put or remove operations are immediately written to the transaction and can be immediately read afterwards (you can call get() or getRange() without awaiting for a returned promise) in the transaction.

The callback function will be queued along with other put and remove operations, and run in the same transaction as other operations that have been queued in the current event turn, and will be executed in the order they were called. transaction will return a promise that will resolve once its transaction has been committed. The promise will resolve to the value returned by the callback function.

For example:

let products = open(...);
// decrement count if above zero
function buyShoe() {
	return products.transaction(() => {
		let shoe = products.get('shoe')
		// this is performed atomically, so we can guarantee no other processes
		// modify this entry before we write the new value
		if (shoe.count > 0) {
			shoe.count--
			products.put('shoe', shoe)
			return true // succeeded
		}
		return false // count is zero, no shoes to buy
	})
}

Note that db.transaction(() => db.put(...)) is functionally the same as calling db.put(...), queuing the put for asynchronously being committed in transaction, except that put executes the database's write operation entirely in separate worker thread, whereas transaction must also synchronize the callback function in the main JS thread to execute (so it is a little bit less efficient, although still quite fast).

Also, the callback function can be an async function (or return a promise), but this is not recommended. If the function returns a promise, this will delay/defer the commit until the callback's promise is resolved. However, while waiting for the callback to finish, other code may execute operations that would end up in the current transaction and may result in a surprising order of operations, and long running transactions are generally discouraged since they extend the single write lock.

db.childTransaction(callback: Function): Promise

This will run the provided callback in a transaction much like transaction except an explicit child transaction will be used specifically for this callback. This makes it possible for the operations to be aborted and rolled back. The callback may return the exported ABORT constant to abort the child transaction for this callback. Also, if the callback function throws an error (or returns a reject promise), this will also abort the child transaction. This childTransaction function is not available if caching or useWritemap is enabled.

The childTransaction function can be executed on its own (to run the child transaction inside the next queued transaction), or it can be executed inside another transaction callback, executing the child transaction within the current transaction.

db.putSync(key, value, versionOrOptions?: number | PutOptions): boolean

This will set the provided value at the specified key, but will do so synchronously. If this is called inside of a transaction, the put will be performed in the current transaction. If not, a transaction will be started, the put will be executed, the transaction will be committed, and then the function will return. We do not recommend this be used for any high-frequency operations as it can be vastly slower (often blocking the main JS thread for multiple milliseconds) than the put operation (typically consumes a few microseconds on a worker thread). The third argument may be a version number or an options object that supports append, appendDup, noOverwrite, noDupData, and version for corresponding libmdbx put flags.

db.removeSync(key, valueOrIfVersion?: number): boolean

This will delete the entry at the specified key. This functions like putSync, providing synchronous entry deletion, and uses the same arguments as remove. This returns true if there was an existing entry deleted, false if there was no matching entry.

db.ifVersion(key, ifVersion: number, callback): Promise<boolean>

This executes a block of conditional writes, and conditionally execute any puts or removes that are called in the callback, using the provided condition that requires the provided key's entry to have the provided version.

db.ifNoExists(key, callback): Promise<boolean>

This executes a block of conditional writes, and conditionally execute any puts or removes that are called in the callback, using the provided condition that requires the provided key's entry does not exist yet.

db.transactionSync(callback: Function)

This will begin a synchronous transaction, executing the provided callback function, and then commit the transaction. The provided function can perform gets, puts, and removes within the transaction, and the result will be committed. The callback function can return a promise to indicate an ongoing asynchronous transaction, but generally you want to minimize how long a transaction is open on the main thread, at least if you are potentially operating with multiple processes.

The callback may return the exported ABORT constant, or throw an error from the callback, to abort the transaction for this callback.

If this is called inside an existing transaction and child transactions are supported (no write maps or caching), this will execute as a child transaction (and can be aborted), otherwise it will simply execute as part of the existing transaction (in which case it can't be aborted).

db.getRange(options: RangeOptions): Iterable<{ key, value: Buffer }>

This starts a cursor-based query of a range of data in the database, returning an iterable that also has map, filter, and forEach methods. The start and end indicate the starting and ending key for the range. The reverse flag can be used to indicate reverse traversal. The limit can limit the number of entries returned. The returned cursor/query is lazy, and retrieves data as iteration takes place, so a large range could specified without forcing all the entries to be read and loaded in memory upfront, and one can exit out of the loop without traversing the whole range in the database. The query is iterable, we can use it directly in a for-of:

for (let { key, value } of db.getRange({ start, end })) {
	// for each key-value pair in the given range
}

Or we can use the provided iterative methods on the returned results:

db.getRange({ start, end })
	.filter(({ key, value }) => test(key))
	.forEach(({ key, value }) => {
		// for each key-value pair in the given range that matched the filter
	})

Note that map and filter are also lazy, they will only be executed once their returned iterable is iterated or forEach is called on it. The map and filter functions also support async/promise-based functions, and you can create an async iterable if the callback functions execute asynchronously (return a promise).

We can also query with offset to skip a certain number of entries, and limit the number of entries to iterate through:

db.getRange({ start, end, offset: 10, limit: 10 }) // skip first 10 and get next 10

If you want to get a true array from the range results, the asArray property will return the results as an array.

Snapshots

By default a range iterator will use a database snapshot, using a single read transaction that remains open and gives a consistent view of the database at the time it was started, for the duration of iterating through the range. However, if the iteration will take place over a long period of time, keeping a read transaction open for a long time can interfere with libmdbx's free space collection and reuse and increase the database size. If you will be using a long duration iterator, you can specify snapshot: false flag in the range options to indicate that it snapshotting is not necessary, and it can reset and renew read transactions while iterating, to allow libmdbx to collect any space that was freed during iteration.

db.getValues(key, options?: RangeOptions): Iterable<any>

When using a database with duplicate entries per key (with dupSort flag), you can use this to retrieve all the values for a given key. This will return an iterator just like getRange, except each entry will be the value from the database:

let db = db.openDB('my-index', {
	dupSort: true,
	encoding: 'ordered-binary',
});
await db.put('key1', 'value1');
await db.put('key1', 'value2');
for (let value of db.getValues('key1')) {
	// iterate values 'value1', 'value2'
}
await db.remove('key', 'value1'); // only remove the second value under key1
for (let value of db.getValues('key1')) {
	// just iterate value 'value1'
}

You can optionally provide a second argument with the same options that getRange handles. You can provide a start and/or end values, which will be define the starting value and ending value for the range of values to return for the key:

for (let value of db.getValues('key1', { start: 'value1', end: 'value3'})) ...

Using start/end is only supported if using the ordered-binary encoding.

db.getKeys(options: RangeOptions): Iterable<any>

This behaves like getRange, but only returns the keys. If this is duplicate key database, each key is only returned once (even if it has multiple values/entries).

RangeOptions

Here are the options that can be provided to the range methods (all are optional):

db.openDB(database: string|{name:string,...})

libmdbx supports multiple databases per environment (an environment corresponds to a single memory-mapped file). When you initialize an libmdbx database with open, the database uses the default root database. However, you can use multiple databases per environment/file and instantiate a database for each one. If you are going to be opening many databases, make sure you set the maxDbs (it defaults to 12). For example, we can open multiple databases for a single environment:

import { open } from 'lmdbx';
let rootDB = open('all-my-data');
let usersDB = myDB.openDB('users');
let groupsDB = myDB.openDB('groups');
let productsDB = myDB.openDB('products');

Each of the opened/returned databases has the same API as the default database for the environment. Each of the databases for one environment also share the same batch queue and automated transactions with each other, so immediately writing data from two databases with the same environment will be batched together in the same commit. For example:

usersDB.put('some-user', { data: userInfo });
groupsDB.put('some-group', { groupData: moreData });

Both these puts will be batched and committed in the same transaction in the next event turn. Also, you can start a transaction from one database and make writes from any of the databases in that same environment (and they will be a part of the same transaction):

rootDB.transaction(() => {
	usersDB.put('some-user', { data: userInfo });
	groupsDB.put('some-group', { groupData: moreData });
});

getLastVersion(): number

This returns the version number of the last entry that was retrieved with get (assuming it was a versioned database). If you are using a database with cache enabled, use getEntry instead.

asBinary(buffer): Binary

This can be used to directly store a buffer or Uint8Array as a value, bypassing any encoding. If you are using a database with an encoding that isn't binary, setting a value with a Uint8Array will typically be encoded with the db's encoding (for example MessagePack wraps in a header, preserving its type for get). However, if you want to bypass encoding, for example, if you have already encoded a value, you can use asBinary:

let buffer = encode(myValue) // if we have already serialized a value, perhaps to compare it or check its size
db.put(key, asBinary(buffer)) // we can directly store the encoded value

close(): Promise

This will close the current db. This closes the underlying libmdbx database, and if this is the root database (opened with open as opposed to db.openDB), it will close the environment (and child databases will no longer be able to interact with the database). This is asynchronous, waiting for any outstanding transactions to finish before closing the database.

db.doesExist(key, valueOrVersion): boolean

This checks if an entry exists for the given key, and optionally verifies that the version or value exists. If this is a dupSort enabled database, you can provide the key and value to check if that key/value entry exists. If you are using a versioned database, you can provide a version number to verify if the entry for the provided key has the specific version number. This returns true if the entry does exist.

db.getBinary(key): Buffer

This will retrieve the binary data at the specified key. This is just like get, except it will always return the value's binary representation as a buffer, rather than decoding with the db's encoding format (if there is no entry, undefined will still be returned).

db.getBinaryFast(key): Buffer

This will retrieve the binary data at the specified key, like getBinary, except it uses reusable buffers, which is faster, but means the data in the buffer is only valid until the next get operation (including cursor operations). Since this is a reusable buffer it also slightly differs from a typical buffer: the length property is set to the length of the value (what you typically want for normal usage), but the byteLength will be the size of the full allocated memory area for the buffer (usually much larger).

prefetch(ids, callback?): Promise

With larger databases and situations where the data in the database may not be cached in memory, it may be advisable to use asynchronous methods to fetch data to avoid slow/expensive hard-page faults on the main thread. This method provides a means of asynchronously fetching data in separate thread/asynchronously to ensure data is in memory. This fetches the data for given ids and accesses all pages to ensure that any hard page faults are done asynchronously. Once completed, synchronous gets to the same entries will most likely be in memory and fast. The prefetch can also be run in parallel with sync gets (for the same entries) in situations where the main thread be busy with deserialization and other work at roughly the same rate as the prefetch page faults might occur.

getMany(ids: K[], callback?): Promise

Asynchronously gets the values stored by the given ids and return the values in array corresponding to the array of ids. This uses prefetch followed by gets for each entry once the data is prefetched.

resetReadTxn(): void

Normally, this library will automatically start a reader transaction for get and range operations, periodically reseting the read transaction on new event turns and after any write transactions are committed, to ensure it is using an up-to-date snapshot of the database. However, you can call resetReadTxn if you need to manually force the read transaction to reset to the latest snapshot/version of the database. In particular, this may be useful running with multiple processes where you need to immediately reset the read transaction based on a known update in another process (rather than waiting for the next event turn).

Concurrency and Versioning

libmdbx and this library are designed for high concurrency, and we recommend using multiple processes to achieve concurrency (processes are more robust than threads, and thread's advantage of shared memory is minimal with separate NodeJS isolates, and you still get shared memory access with processes when using libmdbx). Versioning or asynchronous transactions are the preferred method for achieving atomicity with data updates with concurrency. A version can be stored with an entry, and later the data can be updated, conditional on the version being the expected version. This provides a robust mechanism for concurrent data updates even with multiple processes are accessing the same database. To enable versioning, make sure to set the useVersions option when opening the database:

let myDB = open('my-db', { useVersions: true });

You can set a version by using the version argument in put calls. You can later update data and ensure that the data will only be updated if the version matches the expected version by using the ifVersion argument. When retrieving entries, you can access the version number by calling getLastVersion().

You can then make conditional writes, examples:

myDB.put('key1', 'value1', 4, 3); // new version of 4, only if previous version was 3

myDB.ifVersion('key1', 4, () => {
	myDB.put('key1', 'value2', 5); // equivalent to myDB.put('key1', 'value2', 5, 4);
	myDB.put('anotherKey', 'value', 3); // we can do other puts based on the same condition above
	// we can make puts in other databases (from the same database environment) based on same condition too
	myDB2.put('keyInOtherDb', 'value'); 
});

Asynchronous transactions are also a robust way to handle concurrency with multiple processes and provides a more traditional and flexible mechanism for making atomic ACID-compliant transactional data changes.

Shared Structures

Shared structures are mechanism for storing the structural information about objects stored in database in dedicated entry, outside of individual entries, for reuse across all of the data in database, for much more efficient storage and faster retrieval of data when storing objects that have the same or similar structures (note that this is only available using the default MessagePack or CBOR encoding, using the msgpackr or cbor-x package). This is highly recommended when storing structured objects with similiar object structures (including inside of array). When enabled, when data is stored, any structural information (the set of property names) is automatically generated and stored in separate entry to be reused for storing and retrieving all data for the database. To enable this feature, simply specify the key where shared structures can be stored. You can use a symbol as a metadata key, as symbols are outside of the range of the standard JS primitive values:

let myDB = open('my-db', {
	sharedStructuresKey: Symbol.for('structures')
})

Once shared structures has been enabled, you can persist JavaScript objects just as you would normally would, and this library will automatically generate, increment, and save the structural information in the provided key to improve storage efficiency and performance. You never need to directly access this key, just be aware that that entry is being used by this library.

Compression

This library can optionally use off-thread LZ4 compression as part of the asynchronous writes to enable efficient compression with virtually no overhead to the main thread. LZ4 decompression (in get and getRange calls) is extremely fast and generally has a low impact on performance. Compression is turned off by default, but can be turned on by setting the compression property when opening a database. The value of compression can be true or an object with compression settings, including properties:

let myDB = open('my-db', {
	compression: {
		threshold: 500, // compress any entry larger than 500 bytes
		dictionary: fs.readFileSync('dict.txt') // use your own shared dictionary
	}
})

Compression is recommended for large databases that may be close to or larger than available RAM, to improve caching and reduce page faults. If you enable compression for a database, you must ensure that the data is always opened with the same compression setting, so that the data will be properly decompressed.

Caching

This library supports caching of entries from databases, and uses a LRU/LFU (LRFU) and weak-referencing caching mechanism for highly optimized caching and object tracking. There are several key potential benefits to using caching, including performance, key correlation with object identity, and immediate/synchronous access to saved data. Enabling caching will cache gets and puts, which can make frequent gets much faster. Caching is enabled by providing a truthy value for the cache property on the database options.

The weak-referencing mechanism works in harmony with JS garbage collection to allow objects to be cached without preventing GC, and retrieved from the cache until they have actually been collected from memory, making more efficient use of memory. This also can provide a guarantee of object identity correlation with keys: as long as retrieved object is in memory, a get will always return the existing object, and get never will return two copies of the same object (for the same key). The LRFU caching mechanism is scan-resistant, tracking frequency of usage as well as recency.

Because asynchronous put operations immediately go in the cache (and are pinned in the cache until committed), the caching enabled, put values can be retrieved via get, immediately and synchronously after the put call. Without caching enabled, you need wait for the put promise to resolve (or use asynchronous transactions) before you can access the stored value, but the cache enables the value to be immediately without waiting for the commit to finish:

db.put('hi', 'there');
db.get('hi'); // can immediately access value without having to await the promise

While caching can improve performance, libmdbx itself is extremely fast, and for small objects with sporadic access, caching may not improve performance. Caching tends to provide the most performance benefits for larger objects that may have more significant deserialization costs. Caching does not apply to getRange queries. Also note that this requires Node 14.10 or higher (or Node v13.0 with --harmony-weak-ref flag).

If you are using caching with a database that has versions enabled, you should use the getEntry method to get the value and version, as getLastVersion will not be reliable (only returns the version when the data is accessed from the database).

Asynchronous Transaction Ordering

Asynchronous single operations (put and remove) are executed in the order they were called, relative to each other. Likewise, asynchronous transaction callbacks (transaction and childTransaction) are also executed in order relative to other asynchronous transaction callbacks. However, by default all queued asynchronous transaction callbacks are executed after all queued asynchronous single operations. But, you can enable strict ordering so that asynchronous transactions executed in order with the asynchronous single operations, by setting the strictAsyncOrder property to true.

However, strict ordering comes with a couple of caveats. First, because asynchronous single operations are executed on separate transaction threads, but asynchronous transaction callbacks must execute on the main JS thread, if there is a lot of frequent switching back and forth between single operations and callbacks, this can significantly reduce performance since it requires substantial thread switching and event queuing.

Second, if there are asynchronous operations that have been performed, and asynchronous transaction callbacks that are waiting to be called, and a synchronous transaction is executed (transactionSync), this must interrupt and split the current asynchronous transaction batch, so the synchronous transaction can be executed (the synchronous transaction can not block to wait for the asynchronous if there are outstanding callbacks to execute as part of that async transaction, as that would result in a deadlock). This can potentially create an exception to the general rule that all asynchronous operations that are performed in one event turn will be part of the same transaction. Of course, each single asynchronous transaction callback is still guaranteed to execute in a single atomic transaction (and calls to transactionSync during a asynchronous transaction callback are simply executed as part of the current transaction). With the default ordering of 'after', it is possible for the async transactions to be performed in a separate transaction than the single operations if executed.

DB Options

The open method can be used to create the main database/environment with the following signature: open(path, options) or open(options) Additional databases can be opened within the main database environment with: db.openDB(name, options) or db.openDB(options) If the path has an . in it, it is treated as a file name, otherwise it is treated as a directory name, where the data will be stored. The options argument to either of the functions should be an object, and supports the following properties, all of which are optional (except name if not otherwise specified):

import * as cbor from 'cbor-x';
let db = open({ encoder: cbor });

The following additional option properties are only available when creating the main database environment (open):

libmdbx Flags

In addition, the following options map to libmdbx's env flags, <a href="https://erthink.github.io/libmdbx/group__c__api.html">described here</a>. None of these need to be set, the defaults can always be used and are generally recommended, but these are available for various needs and performance optimizations:

Serialization options

If you are using the default encoding of 'msgpack', the msgpackr package is used for serialization and deserialization. You can provide encoder options that are passed to msgpackr or cbor, as well, by including them in the encoder property object. For example, these options can be potentially useful:

You can also use the CBOR format by specifying the encoding of 'cbor' and installing the cbor-x package, which supports the same options.

Custom Key Encoding

Custom key encoding can be useful for defining more efficient encodings of specific keys like UUIDs. Custom key encoding can be specified by providing a keyEncoder object with the following methods:

Events

The database instance is an <a href="https://nodejs.org/dist/latest-v11.x/docs/api/events.html#events_class_eventemitter">EventEmitter</a>, allowing application to listen to database events. There is just one event right now:

beforecommit - This event is fired before a transaction finishes/commits. The callback function can perform additional (asynchronous) writes (put and remove) and they will be included in the transaction about to be performed as the last operation(s) before the transaction commits (this can be useful for updating a global version stamp based on all previous writes, for example). Using this event forces eventTurnBatching to be enabled. This can be called multiples times in a transaction, but should always be called as the last operation of a transaction.

Deno

This package is supported on Deno as of v2.1, but there are some requirements and limitations. First, lmdbx-js requires FFI (which is currently marked unstable) and several permissions to be enabled, so you need to start deno with at least these flags:

deno run --allow-ffi --unstable --allow-write --allow-read --allow-env --allow-net your-app.ts

Deno currently doesn't provide any infrastructure for binary builds, so lmdbx-js will attempt to download and save the appropriate binary file on its own. If you need to manually specify a path, you can do so with the LMDBX_LIB_PATH env variable.

You can then use the library with an import of the lmdbx-js module from deno.land (insert the version you want):

import { open } from 'https://deno.land/x/lmdbx@<version>/mod.ts';

Also, lmdbx-js doesn't support asynchronous transaction callbacks (transaction API), which can't be efficiently implemented without a resolution to this issue. You can still use the standard asynchronous put and remove methods, which will properly be committed asynchronously, as well as the synchronous transactions.

LevelUp

If you have an existing application built on LevelUp, the lmdbx-js is designed to make it easy to transition to this package, with most of the LevelUp API implemented and supported in lmdbx-js. This includes the put, del, batch, status, isOperation, and getMany functions. One key difference in APIs is that LevelUp uses asynchronous callback based gets, but lmdbx-js is so fast that it generally returns from get call before an an event can even be queued, consequently lmdbx-js uses synchronous gets. However, there is a levelup export that can be used to generate a new database instance with LevelUp's style of API for get (although it still runs synchronously):

let dbLevel = levelup(db)
dbLevel.get(id, (error, value) => {

})
// or
dbLevel.get(id).then(...)

Benchmarks

Benchmarking on Node 14.9, with 3.4Ghz i7-4770 Windows, a get operation, using JS numbers as a key, retrieving data from the database (random access), and decoding the data into a structured object with 10 properties (using default MessagePack encoding), can be done in about half a microsecond, or about 1,900,000/sec on a single thread. This is almost three times as fast as a single native JSON.parse call with the same object without any DB interaction! LMDB scales effortlessly across multiple processes or threads; over 6,000,000 operations/sec on the same 4/8 core computer by running across multiple threads (or 18,000,000 operations/sec with raw binary data). By running writes on a separate transactional thread, writing is extremely fast as well. With encoding the same objects, full encoding and writes can be performed at about 500,000 puts/second or 1,700,000 puts/second on multiple threads.

Build Options

A few libmdbx options are available at build time, and can be specified with options with npm install (which can be specified in your package.json install script):

On MacOS, there is a default limit of 10 robust locked semaphores, which imposes a limit on the number of open write transactions (if you have over 10 database environments with a write transaction). If you need more concurrent write transactions, you can increase your maximum undoable semaphore count by setting kern.sysv.semmnu on your local computer. Otherwise don't use the robust mutex option. You can also try to minimize overlapping transactions and/or reduce the number of database environments (and use more databases within each environment).

npm install --use_data_v1=true: This will build from an older version of libmdbx that uses the legacy data format version 1 (the latest libmdbx uses data format version 2). For portability of the data format, this may be preferable since many libraries still use older versions of libmdbx. Since this is an older version of libmdbx, some features may not be available, including encryption and remapping.

npm install --enable_fast_api_calls=true (or env var ENABLE_FAST_API_CALLS=true): This will build lmdbx-js with V8's new API for fast calls. lmdbx-js supports the new fast API for several functions, and this can provide significant performance benefits for gets and range retrieval. This should be used in conjunction with starting node with the --turbo-fast-api-calls option. This is only supported in Node v16 and higher.

Alternate Database

The lmdb-js project is developed in conjunction with lmdbx-js, which is based on libmdbx, a fork of LMDB. Each of these have their own advantages:

Credits

This library is built on libmdbx and is built from and derived from the excellent node-lmdb package.

License

This library is licensed under the terms of the MIT license.

Related Projects

lmdbx-js is branched from lmdbx-js