Awesome

Python IPware (A Python Package)

A python package for server applications to retrieve client's IP address

Overview

Best attempt to get client's IP address while keeping it DRY.

Notice

Addressing IP Address Spoofing

There is no perfect out-of-the-box solution to counteract fake IP addresses, or IP Address Spoofing. We strongly recommend reading the Advanced Users section. Utilize the proxy_list and proxy_count features to adapt the functionality to your specific requirements, especially if you plan to incorporate python-ipware into authentication, security, or anti-fraud systems.

Open Source Considerations

Keep in mind that python-ipware is an open-source project, meaning its source code is accessible to everyone. While this openness promotes community engagement and scrutiny, it also exposes the code to potential exploiters who might take advantage of unimplemented or improperly implemented features.

Complementary Security Measure

Use python-ipware only as an additional layer to bolster your security, not as a primary defense mechanism. Always pair it with robust firewall security protocols to ensure comprehensive protection against a variety of security threats, including IP spoofing.

How to install

pip install python-ipware

-- or --

pip3 install python-ipware

How to use

Using python-ipware to Retrieve Client IP in Django or Flask

Here's a basic example of how to use python-ipware in a view or middleware where the request object is available. This can be applied in Django, Flask, or other similar frameworks.

from python_ipware import IpWare

# Instantiate IpWare with default values
ipw = IpWare()

# Get the META data from the request object
meta = request.META  # Django
# meta = request.environ # Flask

# Get the client IP and the trusted route flag
ip, trusted_route = ipw.get_client_ip(meta)

if ip:
    # The 'ip' is an object of type IPv4Address() or IPv6Address() with properties like:
    # - ip.is_global: True if the IP is globally routable
    # - ip.is_private: True if the IP is a private address
    # - ip.is_loopback: True if the IP is a loopback address
    # - ip.is_multicast: True if the IP is a multicast address
    # - ip.is_unspecified: True if the IP is an unspecified address
    # - ip.is_reserved: True if the IP is a reserved address

if trusted_route:
    # Indicates if the request came through our trusted proxies

# You can now use the IP address as needed, for example, attaching it to the request object.
# Consider caching the IP address for performance, as it doesn't change often.
# It's also advisable to have distinct session IDs for public and anonymous users to cache the IP address effectively.

Advanced users:

Precedence Order

The client IP address can be found in one or more request headers attributes. The lookup order is top to bottom and the default attributes are as follow.

# The default meta precedence order - you can be more specific as per your configuration
# It will start looking through the request headers from top to bottom to find the best match
# It will return the first qualified global (public) ip address it finds, else
# It will return the first qualified private ip address it finds, else
# It will return the first qualified loopback up address it finds, else it returns None
# Update as per your network topology, reduce the numbers and/or reorder the list
request_headers_precedence_order = (
    "X_FORWARDED_FOR",  # Load balancers or proxies such as AWS ELB (default client is `left-most` [`<client>, <proxy1>, <proxy2>`])
    "HTTP_X_FORWARDED_FOR",  # Similar to X_FORWARDED_TO
    "HTTP_CLIENT_IP",  # Standard headers used by providers such as Amazon EC2, Heroku etc.
    "HTTP_X_REAL_IP",  # Standard headers used by providers such as Amazon EC2, Heroku etc.
    "HTTP_X_FORWARDED",  # Squid and others
    "HTTP_X_CLUSTER_CLIENT_IP",  # Rackspace LB and Riverbed Stingray
    "HTTP_FORWARDED_FOR",  # RFC 7239
    "HTTP_FORWARDED",  # RFC 7239
    "HTTP_CF_CONNECTING_IP",  # CloudFlare
    "X-CLIENT-IP",  # Microsoft Azure
    "X-REAL-IP",  # NGINX
    "X-CLUSTER-CLIENT-IP",  # Rackspace Cloud Load Balancers
    "X_FORWARDED",  # Squid
    "FORWARDED_FOR",  # RFC 7239
    "CF-CONNECTING-IP",  # CloudFlare
    "TRUE-CLIENT-IP",  # CloudFlare Enterprise,
    "FASTLY-CLIENT-IP",  # Firebase, Fastly
    "FORWARDED",  # RFC 7239
    "CLIENT-IP",  # Akamai and Cloudflare: True-Client-IP and Fastly: Fastly-Client-IP
    "REMOTE_ADDR",  # Default
)

You can customize the order by providing your own list during initialization when calling IpWare().

# specific meta key
ipw = IpWare(precedence=("X_FORWARDED_FOR"))

# multiple meta keys
ipw = IpWare(precedence=("X_FORWARDED_FOR", "HTTP_X_FORWARDED_FOR"))

# Django (request.META)
ip, proxy_verified = ipw.get_client_ip(meta=request.META)

# Flask (request.environ)
ip, proxy_verified = ipw.get_client_ip(meta=request.environ)

# ... etc.

Trusted Proxies

If your node server is behind one or more known proxy server(s), you can filter out unwanted requests by providing a trusted proxy list, or a known proxy count.

You can customize the proxy IP prefixes by providing your own list during initialization when calling IpWare(proxy_list). You can pass your custom list on every call, when calling the proxy-aware api to fetch the ip.

# In the above scenario, use your load balancer IP address as a way to filter out unwanted requests.
ipw = IpWare(proxy_list=["198.84.193.157"])


# If you have multiple proxies, simply add them to the list
ipw = IpWare(proxy_list=["198.84.193.157", "198.84.193.158"])

# For proxy servers with fixed sub-domain and dynamic IP, use the following pattern.
ipw = IpWare(proxy_list=["177.139.", "177.140"])

# usage: non-strict mode (X-Forwarded-For: <fake>, <client>, <proxy1>, <proxy2>)
# The request went through our <proxy1> and <proxy2>, then our server
# We choose the <client> ip address to the left our <proxy1> and ignore other ips
ip, trusted_route = ipw.get_client_ip(meta=request.META)


# usage: strict mode (X-Forwarded-For: <client>, <proxy1>, <proxy2>)
# The request went through our <proxy1> and <proxy2>, then our server
# Total ip address are total trusted proxies + client ip
# We don't allow far-end proxies, or fake addresses (exact or None)
ip, trusted_route = ipw.get_client_ip(meta=request.META, strict=True)

In the following example, your public load balancer (LB) can be seen as a trusted proxy.

`Real` Client <public> <-> <public> LB (Server) <private> <-----> <private> Django Server
                                                             ^
                                                             |
`Fake` Client <private> <-> <private> LB (Server) <private> -+

Proxy Count

If your python server is behind a known number of proxies, but you deploy on multiple providers and don't want to track proxy IPs, you still can filter out unwanted requests by providing proxy count.

You can customize the proxy count by providing your proxy_count during initialization when calling IpWare(proxy_count=2).

from python_ipware import IpWare

# Enforce proxy count
# proxy_count=0 is valid
# proxy_count=None to disable proxy_count check
ipw = IpWare(proxy_count=2)

# Example usage in non-strict mode:
# X-Forwarded-For format: <fake>, <client>, <proxy1>, <proxy2>
# At least `proxy_count` number of proxies
ip, trusted_route = ipw.get_client_ip(meta=request.META)

# Example usage in strict mode:
# X-Forwarded-For format: <client>, <proxy1>, <proxy2>
# Exact `proxy_count` number of proxies
ip, trusted_route = ipw.get_client_ip(meta=request.META, strict=True)

Proxy Count & Trusted Proxy List Combo

In this example, we utilize the total number of proxies as a method to filter out unwanted requests while verifying the trust proxies.

from python_ipware import IpWare

# Enforce both proxy count and trusted proxies
ipw = IpWare(proxy_count=1, proxy_list=["198.84.193.157"])

# Example usage in non-strict mode:
# X-Forwarded-For format: <fake>, <client>, <proxy1>, <proxy2>
# At least `proxy_count` number of proxies
ip, trusted_route = ipw.get_client_ip(meta=request.META)

# Example usage in strict mode:
# X-Forwarded-For format: <client>, <proxy1>
# Exact `proxy_count` number of proxies
ip, trusted_route = ipw.get_client_ip(meta=request.META, strict=True)

In the following example, your public load balancer (LB) can be seen as the only proxy.

`Real` Client <public> <-> <public> LB (Server) <private> <---> <private> Node Server
                                                            ^
                                                            |
                                `Fake` Client  <private> ---+

Support for Public IP Address (routable on the internet), Private and Loopback

# We make best attempt to return the first public IP address based on header precedence
# Then we fall back on private, followed by loopback
from python_ipware import IpWare

# no proxy enforce in this example
ipw = IpWare()

ip, _ = ipw.get_client_ip(meta=request.META)

if ip.is_global:
    print('Public IP')
else if ip.is_private:
    print('Private IP')
else if ip.is_loopback:
    print('Loopback IP')
else if ip.is_multicast:
    print('Multicast IP')
else if ip.is_unspecified:
    print('Unspecified IP')
else if ip.is_reserved:
    print('Reserved IP')

IP Address Handling

Support for IPv4, IPv6, and IP:Port Patterns

python-ipware is designed to handle various IP address formats efficiently:

• Ports Stripping: Automatically removes ports from IP addresses, ensuring only the IP is processed.
• IPv6 Unwrapping: Extracts and processes IPv4 addresses wrapped in IPv6 containers.

Identifying the Originating IP Address

The de-facto standard for identifying the originating client IP address is to use the leftmost IP in the X-Forwarded-For header, following the pattern client, proxy1, proxy2. Here, the rightmost IP is considered the most trusted proxy.

Custom Network Configurations

In some rare scenarios, networks might be configured such that the rightmost IP address represents the originating client. In such cases, instantiate IpWare with the leftmost=False parameter:

Running the tests

To run the tests against the current environment:

./test.sh

License

Released under a (MIT) license.

Version

X.Y.Z Version

`MAJOR` version -- making incompatible API changes
`MINOR` version -- adding functionality in a backwards-compatible manner
`PATCH` version -- making backwards-compatible bug fixes

Sponsors

Neekware Inc.

Need Support?

Neekware Inc. (reach out at info@neekware.com)