Home

Awesome

airba.sh

Codacy Badge

Airbash is a POSIX-compliant, fully automated WPA PSK PMKID and handshake capture script aimed at penetration testing. It is compatible with Bash and Android Shell (tested on Kali Linux and Cyanogenmod 10.2) and uses aircrack-ng to scan for clients that are currently connected to access points (AP). Those clients are then deauthenticated in order to capture the PMKID and/or handshake when attempting to reconnect to the AP. Verification of captured data is done using hcxpcaptool and hcxpcapngtool from hcxtools by ZeroBeat. If one or more PMKIDs and/or handshakes are captured, they are entered into an SQLite3 database, along with the time of capture and current GPS data (if properly configured).

After capture, the database can be tested for vulnerable router models using crackdefault.sh. It will search for entries that match the implemented modules, which currently include algorithms to compute default keys for Speedport 500-700 series, Thomson/SpeedTouch, UPC 7 digits (UPC1234567) and HOTBOX routers.

For more information on the PMKID attack, New attack on WPA/WPA2 using PMKID is a good read.

Sample Run

asciicast

Requirements

WiFi interface in monitor mode (on Android this can be achieved by using bcmon if the device is compatible)

aircrack-ng (for Android android_aircrack prebuilt binaries can be used)

SQLite3 (Android: installed by default on CyanogenMod 10.2)

openssl for compilation of modules and hcxtools

hcxpcaptool and hcxpcapngtool from hcxtools for detection of PMKIDs and/or handshakes and conversion to hashcat formats

In order to log GPS coordinates of access points, configure your coordinate logging software to log to .location/_.txt (the filename can be chosen as desired). Airbash will always use the output of cat "$path$loc"*.txt 2>/dev/null | sed '2q;d', which equals to reading all .txt files in .loc/ and picking the second line. The reason for this way of implementation is the functionality of GPSLogger, which was used on the development device.

Calculating default keys

After capturing a new PMKID or handshake, the database can be queried for vulnerable router models. If a module applies, the default keys for this router series are calculated and used as input for aircrack-ng to try and recover the passphrase.

Compiling Modules

The modules for calculating Thomson/SpeedTouch and UPC1234567 (7 random digits) default keys are included in src/

Credits for the code go to the authors Kevin Devine and mailto:peter@haxx.in.

On Linux:
gcc -fomit-frame-pointer -O3 -funroll-all-loops -o modules/st modules/stkeys.c -lcrypto
gcc -O2 -o modules/upckeys modules/upc_keys.c -lcrypto

In order to enable auto detection, please move the binaries to airbash/bin (will be added to PATH during execution) or a directory that's on PATH.

If on Android, you may need to copy the binaries to /system/xbin/ or to another directory where binary execution is allowed.

Usage

Running install.sh will create the database, prepare the folder structure and create shortlinks to both scripts which can be moved to a directory that is on $PATH to allow execution from any location.

After installation, you may need to manually adjust INTERFACE on line 46 in airba.sh. This will later be determined automatically, but for now the default is set to wlan0, to allow out of the box compatibility with bcmon on Android.

./airba.sh starts the script, automatically scanning and attacking targets that are not found in the database. ./crackdefault.sh attempts to break known default key algorithms.

To view the database contents, run sqlite3 .db.sqlite3 "SELECT * FROM hs" in the main directory.

Update (Linux only ... for now)

Airbash can be updated by executing update.sh. This will clone the master branch into /tmp/ and overwrite the local files.

Output

_n: number of access points found

__c/m: represents client number and maximum number of clients found, respectively

-: access point is blacklisted

x: access point already in database

?: access point out of range (not visible to airodump anymore)

The Database

The database contains a table called captures with seven columns.

id: incrementing counter of table entries

latitude and longitude: GPS coordinates of the handshake (if available)

bssid: MAC address of the access point

essid: Name identifier

pmkid: WPA PMKID, if captured

psk: WPA Passphrase, if known

processed: Flag that gets set by crackdefault.sh to prevent duplicate calculation of default keys if a custom passphrase was used.

Currently, the SQLite3 database is not password-protected.

Contributing

Contributions are very welcome, especially additional modules to be able to crack more default keys. A template module is included in modules/. crackdefault.sh contains a template elif statement to include the new module.

If you want to contribute, make sure your code is licensed under the MIT License (like this project). When contributing shell scripts, please make sure the code is POSIX-compliant. Other than that, just open up an issue briefly describing the changes and create a pull request!

Contributors: D4rk4 (committed the HOTBOX module!)