Home

Awesome

Loam

Build Status

Loam is part of the Magma ecosystem of python programming tools for FPGAs.

Magma is a programming model for building hardware. The main abstraction in Magma is a Circuit. Circuits are created and then wired together. Magma circuits can be saved as structural verilog files.

Mantle is a library of useful circuits. Examples of mantle circuits are logic operators, arithmetic operators, comparison operators, multiplexers, decoders and encoders, flip-flops, registers, counters, shift regiseters and memory.

Loam extends Magma to model FPGAs, Peripherals, Parts and Boards. A part represents an IC and a board a PCB. Parts and boards are themselves circuits. Parts can be wired to other parts, and boards consist of a collection of parts and headers. Just like parts, boards can be wired together via their headers. Loam makes it easy to build applications on a variety of different FPGA demonstration boards.

FPGAs are a subclass of parts. Circuits can be created on an FPGAs using Magma. A special feature of loam are peripherals. Peripherals make it easy to instantiate hardware drivers on an FPGA for a part connected to the FPGA.

Loam implementations of boards are expected to implement drivers for all the parts on the board. For example, a Lattice Icestick board contains an Lattice ice40 FPGA, an FTDI USART, LEDS, and 3 headers. The IceStick board contains built-in drivers for the USART and LEDs. This makes it very easy to build an application running on a particular board.

For example, here is a complete application to blink an LED on the IceStick.

from magma import wire, EndDefine
from mantle import Counter
from loam.boards.icestick import IceStick

# Create an instance of an IceStick board
icestick = IceStick()

# Turn on the Clock peripheral
#  The clock is turned on because we are using a synchronous counter
icestick.Clock.on()

# Turn on the LED D5, also a peripheral
icestick.D5.on()

# Define a Magma Circuit on the FPGA on the IceStick
main = icestick.DefineMain()

# Create a 22-bit counter
N = 22
counter = Counter(N)

# Wire bit 21 of the counter to D5.
#  Since the clock frequency is 12Mhz,
#  bit 22 will toggle  approximately once per second
wire(counter.O[N-1], main.D5)

EndDefine()

This application is contained in the file blink.py. blink.py is compiled to verilog using magma.

$ magma -b icestick blink.py

The verilog (.v) and physical constraint files (.pcf) can then be compiled to a bitstream file using the open source yosys tool chain

$ cd build
$ make
yosys -q -p 'synth_ice40 -top main -blif blink.blif' blink.v
arachne-pnr -q -d 1k -o blink.txt -p blink.pcf blink.blif
icepack blink.txt blink.bin

Finally, we upload to the board using the open source icestorm tools.

$ make upload
iceprog blink.bin
...

It is that easy to make an LED blink using an FPGA!

Setup

$ git clone https://github.com/phanrahan/loam
$ cd loam

Install the Python dependencies. You can do this automatically using pip

$ pip install -r requirements.txt

Or manually

Install the pytest testing framework and the loam package, then run the test suite to check that everything is in order.

$ pip install pytest
$ pip install -e .
$ ./scripts/run_tests.sh