Awesome
libusbmuxd
A client library for applications to handle usbmux protocol connections with iOS devices.
Table of Contents
Features
This project is a client library to multiplex connections from and to iOS devices alongside command-line utilities.
It is primarily used by applications which use the libimobiledevice library to communicate with services running on iOS devices.
The library does not establish a direct connection with a device but requires connecting to a socket provided by the usbmuxd daemon.
The usbmuxd daemon is running upon installing iTunes on Windows and Mac OS X.
The libimobiledevice project provides an open-source reimplementation of the usbmuxd daemon to use on Linux or as an alternative to communicate with iOS devices without the need to install iTunes.
Some key features are:
- Protocol: Provides an interface to handle the usbmux protocol
- Port Proxy: Provides the
iproxy
utility to proxy ports to the device - Netcat: Provides the
inetcat
utility to expose a raw connection to the device - Cross-Platform: Tested on Linux, macOS, Windows and Android platforms
- Flexible: Allows using the open-source or proprietary usbmuxd daemon
Furthermore the Linux build optionally provides support using inotify if available.
Building
Prerequisites
You need to have a working compiler (gcc/clang) and development environent available. This project uses autotools for the build process, allowing to have common build steps across different platforms. Only the prerequisites differ and they are described in this section.
libusbmuxd requires libplist and libimobiledevice-glue. On Linux, it also requires usbmuxd installed on the system, while macOS has its own copy and on Windows AppleMobileDeviceSupport package provides it. Check libplist's Building and libimobiledevice-glue's Building section of the respective README on how to build them. Note that some platforms might have them as a package.
Linux (Debian/Ubuntu based)
- Install all required dependencies and build tools:
In case libplist-dev, libimobiledevice-glue-dev, or usbmuxd are not available, you can manually build and install them. See note above.sudo apt-get install \ build-essential \ pkg-config \ checkinstall \ git \ autoconf \ automake \ libtool-bin \ libplist-dev \ libimobiledevice-glue-dev \ usbmuxd
macOS
-
Make sure the Xcode command line tools are installed. Then, use either MacPorts or Homebrew to install
automake
,autoconf
,libtool
, etc.Using MacPorts:
sudo port install libtool autoconf automake pkgconfig
Using Homebrew:
brew install libtool autoconf automake pkg-config
Windows
-
Using MSYS2 is the official way of compiling this project on Windows. Download the MSYS2 installer and follow the installation steps.
It is recommended to use the MSYS2 MinGW 64-bit shell. Run it and make sure the required dependencies are installed:
pacman -S base-devel \ git \ mingw-w64-x86_64-gcc \ make \ libtool \ autoconf \ automake-wrapper \ pkg-config
NOTE: You can use a different shell and different compiler according to your needs. Adapt the above command accordingly.
Configuring the source tree
You can build the source code from a git checkout, or from a .tar.bz2
release tarball from Releases.
Before we can build it, the source tree has to be configured for building. The steps depend on where you got the source from.
Since libusbmuxd depends on other packages, you should set the pkg-config environment variable PKG_CONFIG_PATH
accordingly. Make sure to use a path with the same prefix as the dependencies. If they are installed in /usr/local
you would do
export PKG_CONFIG_PATH=/usr/local/lib/pkgconfig
-
From git
If you haven't done already, clone the actual project repository and change into the directory.
git clone https://github.com/libimobiledevice/libusbmuxd cd libusbmuxd
Configure the source tree for building:
./autogen.sh
-
From release tarball (.tar.bz2)
When using an official release tarball (
libusbmuxd-x.y.z.tar.bz2
) the procedure is slightly different.Extract the tarball:
tar xjf libusbmuxd-x.y.z.tar.bz2 cd libusbmuxd-x.y.z
Configure the source tree for building:
./configure
Both ./configure
and ./autogen.sh
(which generates and calls configure
) accept a few options, for example --prefix
to allow
building for a different target folder. You can simply pass them like this:
./autogen.sh --prefix=/usr/local
or
./configure --prefix=/usr/local
Once the command is successful, the last few lines of output will look like this:
[...]
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
Configuration for libusbmuxd 2.1.0:
-------------------------------------------
Install prefix: .........: /usr/local
inotify support (Linux) .: no
Now type 'make' to build libusbmuxd 2.1.0,
and then 'make install' for installation.
Usage
iproxy
This utility allows binding local TCP ports so that a connection to one (or more) of the local ports will be forwarded to the specified port (or ports) on a usbmux device.
Bind local TCP port 2222 and forward to port 22 of the first device connected via USB:
iproxy 2222:22
This would allow using ssh with localhost:2222
to connect to the sshd daemon
on the device. Please mind that this is just an example and the sshd daemon is
only available for jailbroken devices that actually have it installed.
Please consult the usage information or manual page for a full documentation of available command line options:
iproxy --help
man iproxy
inetcat
This utility is a simple netcat-like tool that allows opening a read/write interface to a TCP port on a usbmux device and expose it via STDIN/STDOUT.
Use ssh ProxyCommand to connect to a jailbroken iOS device via SSH:
ssh -oProxyCommand="inetcat 22" root@localhost
Please consult the usage information or manual page for a full documentation of available command line options:
inetcat --help
man inetcat
Environment
The environment variable USBMUXD_SOCKET_ADDRESS
allows to change the location
of the usbmuxd socket away from the local default one.
An example of using an utility from the libimobiledevice project with an usbmuxd socket exposed on a port of a remote host:
export USBMUXD_SOCKET_ADDRESS=192.168.179.1:27015
ideviceinfo
This sets the usbmuxd socket address to 192.168.179.1:27015
for applications
that use the libusbmuxd library.
Contributing
We welcome contributions from anyone and are grateful for every pull request!
If you'd like to contribute, please fork the master
branch, change, commit and
send a pull request for review. Once approved it can be merged into the main
code base.
If you plan to contribute larger changes or a major refactoring, please create a ticket first to discuss the idea upfront to ensure less effort for everyone.
Please make sure your contribution adheres to:
- Try to follow the code style of the project
- Commit messages should describe the change well without being too short
- Try to split larger changes into individual commits of a common domain
- Use your real name and a valid email address for your commits
Links
- Homepage: https://libimobiledevice.org/
- Repository: https://git.libimobiledevice.org/libusbmuxd.git
- Repository (Mirror): https://github.com/libimobiledevice/libusbmuxd.git
- Issue Tracker: https://github.com/libimobiledevice/libusbmuxd/issues
- Mailing List: https://lists.libimobiledevice.org/mailman/listinfo/libimobiledevice-devel
- Twitter: https://twitter.com/libimobiledev
License
This library is licensed under the GNU Lesser General Public License v2.1,
also included in the repository in the COPYING
file.
The utilities iproxy
and inetcat
are licensed under the GNU General Public License v2.0.
Credits
Apple, iPhone, iPad, iPod, iPod Touch, Apple TV, Apple Watch, Mac, iOS, iPadOS, tvOS, watchOS, and macOS are trademarks of Apple Inc.
This project is an independent software library and has not been authorized, sponsored, or otherwise approved by Apple Inc.
README Updated on: 2024-03-27