Awesome

libimobiledevice-glue

Library with common code used by the libraries and tools around the libimobiledevice project.

Features
Building
Usage
Contributing
Links
License
Credits

Features

The main functionality provided by this library are socket helper functions and a platform independent thread/mutex implementation. Besides that it comes with a number of string, file, and plist helper functions, as well as some other commonly used code that was originally duplicated in the dedicated projects.

Tested on Linux, macOS, and Windows.

Projects using this library

Building

Prerequisites

You need to have a working compiler (gcc/clang) and development environent available. This project uses autotools for the build process, allowing to have common build steps across different platforms. Only the prerequisites differ and they are described in this section.

libimobiledevice-glue requires libplist. Check the Building section of the README on how to build it. Note that some platforms might have it as a package.

Linux (Debian/Ubuntu based)

Install all required dependencies and build tools:
```
sudo apt-get install \
	build-essential \
	pkg-config \
	checkinstall \
	git \
	autoconf \
	automake \
	libtool-bin \
	libplist-dev
```
In case libplist-dev is not available, you can manually build and install it. See note above.

macOS

Make sure the Xcode command line tools are installed. Then, use either MacPorts or Homebrew to install automake, autoconf, libtool, etc.

Using MacPorts:
```
sudo port install libtool autoconf automake pkgconfig
```
Using Homebrew:
```
brew install libtool autoconf automake pkg-config
```

Windows

Using MSYS2 is the official way of compiling this project on Windows. Download the MSYS2 installer and follow the installation steps.

It is recommended to use the MSYS2 MinGW 64-bit shell. Run it and make sure the required dependencies are installed:
```
pacman -S base-devel \
	git \
	mingw-w64-x86_64-gcc \
	make \
	libtool \
	autoconf \
	automake-wrapper \
	pkg-config
```
NOTE: You can use a different shell and different compiler according to your needs. Adapt the above command accordingly.

Configuring the source tree

You can build the source code from a git checkout, or from a .tar.bz2 release tarball from Releases. Before we can build it, the source tree has to be configured for building. The steps depend on where you got the source from.

Since libimobiledevice-glue depends on other packages, you should set the pkg-config environment variable PKG_CONFIG_PATH accordingly. Make sure to use a path with the same prefix as the dependencies. If they are installed in /usr/local you would do

export PKG_CONFIG_PATH=/usr/local/lib/pkgconfig

From git

If you haven't done already, clone the actual project repository and change into the directory.
```
git clone https://github.com/libimobiledevice/libimobiledevice-glue
cd libimobiledevice-glue
```
Configure the source tree for building:
```
./autogen.sh
```
From release tarball (.tar.bz2)

When using an official release tarball (libimobiledevice-glue-x.y.z.tar.bz2) the procedure is slightly different.

Extract the tarball:
```
tar xjf libimobiledevice-glue-x.y.z.tar.bz2
cd libimobiledevice-glue-x.y.z
```
Configure the source tree for building:
```
./configure
```

Both ./configure and ./autogen.sh (which generates and calls configure) accept a few options, for example --prefix to allow building for a different target folder. You can simply pass them like this:

./autogen.sh --prefix=/usr/local

./configure --prefix=/usr/local

Once the command is successful, the last few lines of output will look like this:

[...]
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands

Configuration for libimobiledevice-glue 1.0.1:
-------------------------------------------

  Install prefix: .........: /usr/local

  Now type 'make' to build libimobiledevice-glue 1.0.1,
  and then 'make install' for installation.

Building and installation

If you followed all the steps successfully, and autogen.sh or configure did not print any errors, you are ready to build the project. This is simply done with

make

If no errors are emitted you are ready for installation. Depending on whether the current user has permissions to write to the destination directory or not, you would either run

make install

sudo make install

If you are on Linux, you want to run sudo ldconfig after installation to make sure the installed libraries are made available.

Usage

This library is directly used by libusbmuxd, libimobiledevice, etc., so there is no need to do anything in particular. Feel free to use it in your project, check the header files for available functions. A documentation might be added later.

Contributing

We welcome contributions from anyone and are grateful for every pull request!

If you'd like to contribute, please fork the master branch, change, commit and send a pull request for review. Once approved it can be merged into the main code base.

If you plan to contribute larger changes or a major refactoring, please create a ticket first to discuss the idea upfront to ensure less effort for everyone.

Please make sure your contribution adheres to:

Try to follow the code style of the project
Commit messages should describe the change well without being too short
Try to split larger changes into individual commits of a common domain

License

This library is licensed under the GNU Lesser General Public License v2.1, also included in the repository in the COPYING file.

Credits

Apple, iPhone, iPad, iPod, iPod Touch, Apple TV, Apple Watch, Mac, iOS, iPadOS, tvOS, watchOS, and macOS are trademarks of Apple Inc.

This project is an independent software library and has not been authorized, sponsored, or otherwise approved by Apple Inc.

README Updated on: 2024-10-09