Awesome

Introduction

mvfst (Pronounced move fast) is a client and server implementation of IETF QUIC protocol in C++ by Facebook. QUIC is a UDP based reliable, multiplexed transport protocol that will become an internet standard. The goal of mvfst is to build a performant implementation of the QUIC transport protocol that applications could adapt for use cases on both the internet and the data-center. mvfst has been tested at scale on android, iOS apps, as well as servers and has several features to support large scale deployments.

Features

Server features:

Multi-threaded UDP socket server with a thread local architecture to be able to scale to multi-core servers
Customizable Connection-Id routing. The default Connection-Id routing implementation integrates seamlessly with katran
APIs to enable zero-downtime restarts of servers, so that applications do not have to drop connections when restarting.
APIs to expose transport and server statistics for debuggability
Zero-Rtt connection establishment and customizable zero rtt path validation
Support for UDP Generic segmentation offloading (GSO) for faster UDP writes.

Client features:

Native happy eyeballs support between ipv4 and ipv6 so that applications do not need to implement it themselves
Pluggable congestion control and support for turning off congestion control to plug in application specific control algorithms

Source Layout

quic/api: Defines API that applications can use to interact with the QUIC transport layer.
quic/client: Client transport implementation
quic/codec: Read and write codec implementation for the protocol
quic/common: Implementation of common utility functions
quic/congestion_control: Implementation of different congestion control algorithms such as Cubic and Copa
quic/flowcontrol: Implementations of flow control functions
quic/handshake: Implementations cryptographic handshake layer
quic/happyeyeballs: Implementation of mechanism to race IPV4 and IPV6 connection and pick a winner
quic/logging: Implementation of logging framework
quic/loss: Implementations of different loss recovery algorithms
quic/samples: Example client and server
quic/server: Server transport implementation
quic/state: Defines and implements both connection and stream level state artifacts and state machines

Dependencies

mvfst largely depends on two libraries: folly and fizz.

Building mvfst

Method 1 [Recommended]: Using Getdeps.py

This script is used by many of Meta's OSS tools. It will download and build all of the necessary dependencies first, and will then invoke cmake, etc. to build mvfst. This will help ensure that you build with relevant versions of all of the dependent libraries, taking into account what versions are installed locally on your system.

It's written in python so you'll need python3.6 or later on your PATH. It works on Linux, macOS and Windows.

The settings for mvfst's cmake build are held in its getdeps manifest build/fbcode_builder/manifests/mvfst, which you can edit locally if desired.

Dependencies

If on Linux or MacOS (with homebrew installed) you can install system dependencies to save building them:

# Clone the repo
git clone https://github.com/facebook/mvfst.git
# Install dependencies
cd mvfst
sudo ./build/fbcode_builder/getdeps.py install-system-deps --recursive --install-prefix=$(pwd)/_build mvfst

If you'd like to see the packages before installing them:

./build/fbcode_builder/getdeps.py install-system-deps --dry-run --recursive

On other platforms or if on Linux and without system dependencies getdeps.py will mostly download and build them for you during the build step.

Build

For a simplified build, you can use the getdeps.sh wrapper script. This will download and build all the required dependencies, then build mvfst. It will use the default scratch path for building and install the result in _build.

# Clone the repo
git clone https://github.com/facebook/mvfst.git
# Build using the wrapper script
cd mvfst
./getdeps.sh

At the end of the build, mvfst binaries will be installed at _build/mvfst. You can find the scratch path from the logs or by running python3 ./build/fbcode_builder/getdeps.py show-build-dir mvfst.

For more control over getdeps.py, you can run the tool directly.

# Show help
python3 ./build/fbcode_builder/getdeps.py build mvfst -h
# Build mvfst, using system packages for dependencies if available
python3 ./build/fbcode_builder/getdeps.py --allow-system-packages build mvfst --install-prefix=$(pwd)/_build

Run tests

By default getdeps.py will build the tests for mvfst. You can use it to run them too:

python3 ./build/fbcode_builder/getdeps.py test mvfst --install-prefix=$(pwd)/_build

Method 2 [Deprecated]: Using build.sh script

This method can be used on Ubuntu 18+ and macOS.

To begin, you should install the dependencies we need for build. This largely consists of dependencies from folly as well as fizz.

sudo apt-get install         \
    g++                      \
    cmake                    \
    libboost-all-dev         \
    libevent-dev             \
    libdouble-conversion-dev \
    libgoogle-glog-dev       \
    libgflags-dev            \
    libiberty-dev            \
    liblz4-dev               \
    liblzma-dev              \
    libsnappy-dev            \
    make                     \
    zlib1g-dev               \
    binutils-dev             \
    libjemalloc-dev          \
    libssl-dev               \
    pkg-config               \
    libsodium-dev

Then, build and install folly and fizz

Alternatively, run the helper script build_helper.sh in this subdirectory. It will install and link the required dependencies and also build folly and fizz. This may take several minutes the first time.

./build_helper.sh

After building, the directory _build/ will contain the dependencies (under _build/deps) whereas _build/build will contain all the built libraries and binaries for mvfst.

You can also install mvfst as well as its dependencies folly and fizz to a custom directory using the build script, by supplying an INSTALL_PREFIX env var.

./build_helper.sh -i /usr/local

See ./build_helper.sh --help for more options

You might need to run the script as root to install to certain directories.

By default the build script build_helper.sh enables the building of test target (i.e. runs with -DBUILD_TEST=ON option). Since some of tests in mvfst require some test artifacts of Fizz, it is necessary to supply the path of the Fizz src directory (via option DFIZZ_PROJECT) to correctly build all test targets in mvfst.

Run a sample client and server

Building the test targets of mvfst should automatically build the sample client and server binaries into the build directory.

For getdeps.py build, you can find the echo binary at:

cd $(python3 ./build/fbcode_builder/getdeps.py show-build-dir mvfst)/quic/samples/echo

For the deprecated build.sh script, it will be at the following location if you used the default build path.

cd ./_build/build/quic/samples/echo

The server will automatically bind to ::1 by default if no host is used, but you can then spin a simple echo server by running:

./echo -mode=server -host=<host> -port=<port>

and to run a client:

./echo -mode=client -host=<host> -port=<port>

For more options, see

./echo --help

HTTP/3

This repo implements the QUIC transport. For an HTTP/3 implementation that uses Mvfst, please check out Proxygen.

Contributing

We'd love to have your help in making mvfst better. If you're interested, please read our guide to guide to contributing

Please also join our slack to ask questions or start discussions.

License

mvfst is MIT licensed, as found in the LICENSE file.

API

The API should be considered in alpha. We can't predict all the use cases that people will have, so we're waiting some time before declaring a more stable API. We are open to have several different APIs for different constraints.

Reporting and Fixing Security Issues

Please do not open GitHub issues or pull requests - this makes the problem immediately visible to everyone, including malicious actors. Security issues in mvfst can be safely reported via Facebook's Whitehat Bug Bounty program:

https://www.facebook.com/whitehat

Facebook's security team will triage your report and determine whether or not is it eligible for a bounty under our program.