Home

Awesome

redsocks – transparent TCP-to-proxy redirector

This tool allows you to redirect any TCP connection to SOCKS or HTTPS proxy using your firewall, so redirection may be system-wide or network-wide.

When is redsocks useful?

When is redsocks probably a wrong tool?

Linux/iptables is supported. OpenBSD/pf and FreeBSD/ipfw may work with some hacks. The author has no permanent root access to machines running OpenBSD, FreeBSD and MacOSX to test and develop for these platforms.

Transocks is alike project but it has noticeable performance penality.

Transsocks_ev is alike project too, but it has no HTTPS-proxy support and does not support authentication.

Several Android apps also use redsocks under-the-hood: ProxyDroid <i class="fa fa-play"></i> and sshtunnel <i class="fa fa-play"></i>. And that's over 1'500'000 downloads! Wow!

Features

Redirect any TCP connection to Socks4, Socks5 or HTTPS (HTTP/CONNECT) proxy server.

Login/password authentication is supported for Socks5/HTTPS connections. Socks4 supports only username, password is ignored. for HTTPS, currently only Basic and Digest scheme is supported.

Redirect UDP packets via Socks5 proxy server. NB: UDP still goes via UDP, so you can't relay UDP via OpenSSH.

Handle DNS/UDP queries sending "truncated reply" as an answer or making them DNS/TCP queries to some recursive resolver.

Redirect any HTTP connection to proxy that does not support transparent proxying (e.g. old SQUID had broken `acl myport' for such connections).

Enforcing DNS over TCP using dnstc

DNS is running over UDP and it may be an issue in some environments as proxy servers usually don't handle UDP as a first-class citizen. Redsocks includes dnstc that is fake and really dumb DNS server that returns "truncated answer" to every query via UDP. RFC-compliant resolver should repeat same query via TCP in this case - so the request can be redirected using usual redsocks facilities.

Known compliant resolvers are:

Known non-compliant resolvers are:

On the other hand, DNS via TCP using bind9 may be painfully slow. If your bind9 setup is really slow, you may want to try pdnsd caching server that can run in TCP-only mode.

Relaying DNS/UDP to DNS/TCP via dnsu2t

The code acts as DNS server that multiplexes several UDP queries into single stream of TCP queries over keep-alive connection to upstream DNS server that should be recursive resolver. TCP connection may be handled by redsocks itself if firewall is configured with corresponding rules.

Different resolvers have different timeouts and allow different count of in-flight connections, so you have to tune options yourself for optimal performance (with some black magic, as script testing for optimal DNS/TCP connection parameters is not written yet).

There are other programs doing alike job (with, probably, different bugs)

Source

Source is available at <i class="fa fa-github"></i> GitHub.

Issue tracker is also at GitHub, but keep in mind that the project is not actively maintained, so feature requests will unlikely be implemented within reasonable timeframe. Reproducable bugs having clean desciption will likely be fixed. Destiny of hard-to-reproduce bugs is hard to predict.

New network protocols will unlikely be implemented within this source tree, but if you're seeking for censorship circumvention protocols, you may want to take a look at redsocks2 by Zhuofei Wang AKA @semigodking who is actively maintaining the fork with GFW in mind.

License

All source code is licensed under Apache 2.0 license. You can get a copy at http://www.apache.org/licenses/LICENSE-2.0.html

Packages

Compilation

libevent-2.0.x is required.

gcc and clang are supported right now, other compilers can be used but may require some code changes.

Compilation is as easy as running make, there is no ./configure magic.

GNU Make works, other implementations of make were not tested.

Running

Program has following command-line options:

Following signals are understood: SIGUSR1 dumps list of connected clients to log, SIGTERM and SIGINT terminates daemon, all active connections are closed.

You can see configuration file example in redsocks.conf.example.

iptables example

You have to build iptables with connection tracking and REDIRECT target.

# Create new chain
root# iptables -t nat -N REDSOCKS

# Ignore LANs and some other reserved addresses.
# See http://en.wikipedia.org/wiki/Reserved_IP_addresses#Reserved_IPv4_addresses
# and http://tools.ietf.org/html/rfc5735 for full list of reserved networks.
root# iptables -t nat -A REDSOCKS -d 0.0.0.0/8 -j RETURN
root# iptables -t nat -A REDSOCKS -d 10.0.0.0/8 -j RETURN
root# iptables -t nat -A REDSOCKS -d 100.64.0.0/10 -j RETURN
root# iptables -t nat -A REDSOCKS -d 127.0.0.0/8 -j RETURN
root# iptables -t nat -A REDSOCKS -d 169.254.0.0/16 -j RETURN
root# iptables -t nat -A REDSOCKS -d 172.16.0.0/12 -j RETURN
root# iptables -t nat -A REDSOCKS -d 192.168.0.0/16 -j RETURN
root# iptables -t nat -A REDSOCKS -d 198.18.0.0/15 -j RETURN
root# iptables -t nat -A REDSOCKS -d 224.0.0.0/4 -j RETURN
root# iptables -t nat -A REDSOCKS -d 240.0.0.0/4 -j RETURN

# Anything else should be redirected to port 12345
root# iptables -t nat -A REDSOCKS -p tcp -j REDIRECT --to-ports 12345

# Any tcp connection made by `luser' should be redirected.
root# iptables -t nat -A OUTPUT -p tcp -m owner --uid-owner luser -j REDSOCKS

# You can also control that in more precise way using `gid-owner` from
# iptables.
root# groupadd socksified
root# usermod --append --groups socksified luser
root# iptables -t nat -A OUTPUT -p tcp -m owner --gid-owner socksified -j REDSOCKS

# Now you can launch your specific application with GID `socksified` and it
# will be... socksified. See following commands (numbers may vary).
# Note: you may have to relogin to apply `usermod` changes.
luser$ id
uid=1000(luser) gid=1000(luser) groups=1000(luser),1001(socksified)
luser$ sg socksified -c id
uid=1000(luser) gid=1001(socksified) groups=1000(luser),1001(socksified)
luser$ sg socksified -c "firefox"

# If you want to configure socksifying router, you should look at
# doc/iptables-packet-flow.png, doc/iptables-packet-flow-ng.png and
# https://en.wikipedia.org/wiki/File:Netfilter-packet-flow.svg
# Note, you should have proper `local_ip' value to get external packets with
# redsocks, default 127.0.0.1 will not go. See iptables(8) manpage regarding
# REDIRECT target for details.
# Depending on your network configuration iptables conf. may be as easy as:
root# iptables -t nat -A PREROUTING --in-interface eth_int -p tcp -j REDSOCKS

Note about GID-based redirection

Keep in mind, that changed GID affects filesystem permissions, so if your application creates some files, the files will be created with luser:socksified owner/group. So, if you're not the only user in the group socksified and your umask allows to create group-readable files and your directory permissions, and so on, blah-blah, etc. THEN you may expose your files to another user. Ok, you have been warned.

Homepage

http://darkk.net.ru/redsocks/

Mailing list: redsocks@librelist.com.

Mailing list also has archives.

Author

This program was written by Leonid Evdokimov leon@darkk.net.ru