Home

Awesome

💻📖 hacker-laws

Leggi, teorie, principi e pattern utili agli sviluppatori.

<!-- vim-markdown-toc -->

Introduction

There are lots of laws which people discuss when talking about development. This repository is a reference and overview of some of the most common ones. Please share and submit PRs!

?: This repo contains an explanation of some laws, principles and patterns, but does not advocate for any of them. Whether they should be applied will always be a matter of debate, and greatly dependent on what you are working on.

Laws

And here we go!

Amdahl's Law

Amdahl's Law on Wikipedia

Amdahl's Law is a formula which shows the potential speedup of a computational task which can be achieved by increasing the resources of a system. Normally used in parallel computing, it can predict the actual benefit of increasing the number of processors, which is limited by the parallelisability of the program.

Best illustrated with an example. If a program is made up of two parts, part A, which must be executed by a single processor, and part B, which can be parallelised, then we see that adding multiple processors to the system executing the program can only have a limited benefit. It can potentially greatly improve the speed of part B - but the speed of part A will remain unchanged.

The diagram below shows some examples of potential improvements in speed:

Diagram: Amdahl's Law

(Image Reference: By Daniels220 at English Wikipedia, Creative Commons Attribution-Share Alike 3.0 Unported, https://en.wikipedia.org/wiki/File:AmdahlsLaw.svg)

As can be seen, even a program which is 50% parallelisable will benefit very little beyond 10 processing units, whereas a program which is 95% parallelisable can still achieve significant speed improvements with over a thousand processing units.

As Moore's Law slows, and the acceleration of individual processor speed slows, parallelisation is key to improving performance. Graphics programming is an excellent example - with modern Shader based computing, individual pixels or fragments can be rendered in parallel - this is why modern graphics cards often have many thousands of processing cores (GPUs or Shader Units).

See also:

Brooks' Law

Brooks' Law on Wikipedia

Adding human resources to a late software development project makes it later.

This law suggests that in many cases, attempting to accelerate the delivery of a project which is already late, by adding more people, will make the delivery even later. Brooks is clear that this is an over-simplification, however, the general reasoning is that given the ramp up time of new resources and the communication overheads, in the immediate short-term velocity decreases. Also, many tasks may not be divisible, i.e. easily distributed between more resources, meaning the potential velocity increase is also lower.

The common phrase in delivery "Nine women can't make a baby in one month" relates to Brooks' Law, in particular, the fact that some kinds of work are not divisible or parallelisable.

This is a central theme of the book 'The Mythical Man Month'.

See also:

Conway's Law

Conway's Law on Wikipedia

This law suggests that the technical boundaries of a system will reflect the structure of the organisation. It is commonly referred to when looking at organisation improvements, Conway's Law suggests that if an organisation is structured into many small, disconnected units, the software it produces will be. If an organisation is built more around 'verticals' which are orientated around features or services, the software systems will also reflect this.

See also:

Dunbar's Number

Dunbar's Number on Wikipedia

"Dunbar's number is a suggested cognitive limit to the number of people with whom one can maintain stable social relationships� relationships in which an individual knows who each person is and how each person relates to every other person." There is some disagreement to the exact number. "... [Dunbar] proposed that humans can comfortably maintain only 150 stable relationships." He put the number into a more social context, "the number of people you would not feel embarrassed about joining uninvited for a drink if you happened to bump into them in a bar." Estimates for the number generally lay between 100 and 250.

Like stable relationships between individuals, a developer's relationship with a codebase takes effort to maintain. When faced with large complicated projects, or ownership of many projects we lean on convention, policy, and modeled procedure to scale. Dunbar's number is not only important to keep in mind as an office grows, but also when setting the scope for team efforts or deciding when a system should invest in tooling to assist in modeling and automating logistical overhead. Putting the number into an engineering context, it is the number of projects (or normalized complexity of a single project) for which you would feel confident in joining an on-call rotation to support.

See also:

Gall's Law

Gall's Law on Wikipedia

A complex system that works is invariably found to have evolved from a simple system that worked. A complex system designed from scratch never works and cannot be patched up to make it work. You have to start over with a working simple system.

(John Gall)

Gall's Law implies that attempts to design highly complex systems are likely to fail. Highly complex systems are rarely built in one go, but evolve instead from more simple systems.

The classic example is the world-wide-web. In it's current state, it is a highly complex system. However, it was defined initially as a simple way to share content between academic institutions. It was very successful in meeting these goals and evolved to become more complex over time.

See also:

Hanlon's Razor

Hanlon's Razor on Wikipedia

Never attribute to malice that which is adequately explained by stupidity.

Robert J. Hanlon

This principle suggests that actions resulting in a negative outcome were not a result of ill will. Instead the negative outcome is more likely attributed to those actions and/or the impact being not fully understood.

Hofstadter's Law

Hofstadter's Law on Wikipedia

It always takes longer than you expect, even when you take into account Hofstadter's Law.

(Douglas Hofstadter)

You might hear this law referred to when looking at estimates for how long something will take. It seems a truism in software development that we tend to not be very good at accurately estimating how long something will take to deliver.

This is from the book 'G�del, Escher, Bach: An Eternal Golden Braid'.

See also:

Hutber's Law

Hutber's Law on Wikipedia

Improvement means deterioration.

(Patrick Hutber)

This law suggests that improvements to a system will lead to deterioration in other parts, or it will hide other deterioration, leading overall to a degradation from the current state of the system.

For example, a decrease in response latency for a particular end-point could cause increased throughput and capacity issues further along in a request flow, effecting an entirely different sub-system.

The Hype Cycle & Amara's Law

The Hype Cycle on Wikipedia

We tend to overestimate the effect of a technology in the short run and underestimate the effect in the long run.

(Roy Amara)

The Hype Cycle is a visual representation of the excitement and development of technology over time, originally produced by Gartner. It is best shown with a visual:

The Hype Cycle

(Image Reference: By Jeremykemp at English Wikipedia, CC BY-SA 3.0, https://commons.wikimedia.org/w/index.php?curid=10547051)

In short, this cycle suggests that there is typically a burst of excitement around new technology and its potential impact. Teams often jump into these technologies quickly, and sometimes find themselves disappointed with the results. This might be because the technology is not yet mature enough, or real-world applications are not yet fully realised. After a certain amount of time, the capabilities of the technology increase and practical opportunities to use it increase, and teams can finally become productive. Roy Amara's quote sums this up most succinctly - "We tend to overestimate the effect of a technology in the short run and underestimate in the long run".

Hyrum's Law (The Law of Implicit Interfaces)

Hyrum's Law Online

With a sufficient number of users of an API, it does not matter what you promise in the contract: all observable behaviours of your system will be depended on by somebody.

(Hyrum Wright)

Hyrum's Law states that when you have a large enough number of consumers of an API, all behaviours of the API (even those not defined as part of a public contract) will eventually come to be depended on by someone. A trivial example may be non-functional elements such as the response time of an API. A more subtle example might be consumers who are relying on applying a regex to an error message to determine the type of error of an API. Even if the public contract of the API states nothing about the contents of the message, indicating users should use an associated error code, some users may use the message, and changing the message essentially breaks the API for those users.

See also:

Moore's Law

Moore's Law on Wikipedia

The number of transistors in an integrated circuit doubles approximately every two years.

Often used to illustrate the sheer speed at which semiconductor and chip technology has improved, Moore's prediction has proven to be highly accurate over from the 1970s to the late 2000s. In more recent years, the trend has changed slightly, partly due to physical limitations on the degree to which components can be miniaturised. However, advancements in parallelisation, and potentially revolutionary changes in semiconductor technology and quantum computing may mean that Moore's Law could continue to hold true for decades to come.

Murphy's Law / Sod's Law

Murphy's Law on Wikipedia

Anything that can go wrong will go wrong.

Related to Edward A. Murphy, Jr Murphy's Law states that if a thing can go wrong, it will go wrong.

This is a common adage among developers. Sometimes the unexpected happens when developing, testing or even in production. This can also be related to the (more common in British English) Sod's Law:

If something can go wrong, it will, at the worst possible time.

These 'laws' are generally used in a comic sense. However, phenomena such as Confirmation Bias and Selection Bias can lead people to perhaps over-emphasise these laws (the majority of times when things work, they go unnoticed, failures however are more noticeable and draw more discussion).

See Also:

Parkinson's Law

Parkinson's Law on Wikipedia

Work expands so as to fill the time available for its completion.

In its original context, this Law was based on studies of bureaucracies. It may be pessimistically applied to software development initiatives, the theory being that teams will be inefficient until deadlines near, then rush to complete work by the deadline, thus making the actual deadline somewhat arbitrary.

If this law were combined with Hofstadter's Law, an even more pessimistic viewpoint is reached - work will expand to fill the time available for its completion and still take longer than expected.

See also:

Premature Optimization Effect

Premature Optimization on WikiWikiWeb

Premature optimization is the root of all evil.

(Donald Knuth)

In Donald Knuth's paper Structured Programming With Go To Statements, he wrote: "Programmers waste enormous amounts of time thinking about, or worrying about, the speed of noncritical parts of their programs, and these attempts at efficiency actually have a strong negative impact when debugging and maintenance are considered. We should forget about small efficiencies, say about 97% of the time: premature optimization is the root of all evil. Yet we should not pass up our opportunities in that critical 3%."

However, Premature Optimization can be defined (in less loaded terms) as optimizing before we know that we need to.

Putt's Law

Putt's Law on Wikipedia

Technology is dominated by two types of people, those who understand what they do not manage and those who manage what they do not understand.

Putt's Law is often followed by Putt's Corollary:

Every technical hierarchy, in time, develops a competence inversion.

These statements suggest that due to various selection criteria and trends in how groups organise, there will be a number of skilled people at working levels of a technical organisations, and a number of people in managerial roles who are not aware of the complexities and challenges of the work they are managing. This can be due to phenomena such as The Peter Principle or The Dilbert Principle.

However, it should be stressed that Laws such as this are vast generalisations and may apply to some types of organisations, and not apply to others.

See also:

The Law of Conservation of Complexity (Tesler's Law)

The Law of Conservation of Complexity on Wikipedia

This law states that there is a certain amount of complexity in a system which cannot be reduced.

Some complexity in a system is 'inadvertent'. It is a consequence of poor structure, mistakes, or just bad modeling of a problem to solve. Inadvertent complexity can be reduced (or eliminated). However, some complexity is 'intrinsic' as a consequence of the complexity inherent in the problem being solved. This complexity can be moved, but not eliminated.

One interesting element to this law is the suggestion that even by simplifying the entire system, the intrinsic complexity is not reduced, it is moved to the user, who must behave in a more complex way.

The Law of Leaky Abstractions

The Law of Leaky Abstractions on Joel on Software

All non-trivial abstractions, to some degree, are leaky.

(Joel Spolsky)

This law states that abstractions, which are generally used in computing to simplify working with complicated systems, will in certain situations 'leak' elements of the underlying system, this making the abstraction behave in an unexpected way.

An example might be loading a file and reading its contents. The file system APIs are an abstraction of the lower level kernel systems, which are themselves an abstraction over the physical processes relating to changing data on a magnetic platter (or flash memory for an SSD). In most cases, the abstraction of treating a file like a stream of binary data will work. However, for a magnetic drive, reading data sequentially will be significantly faster than random access (due to increased overhead of page faults), but for an SSD drive, this overhead will not be present. Underlying details will need to be understood to deal with this case (for example, database index files are structured to reduce the overhead of random access), the abstraction 'leaks' implementation details the developer may need to be aware of.

The example above can become more complex when more abstractions are introduced. The Linux operating system allows files to be accessed over a network but represented locally as 'normal' files. This abstraction will 'leak' if there are network failures. If a developer treats these files as 'normal' files, without considering the fact that they may be subject to network latency and failures, the solutions will be buggy.

The article describing the law suggests that an over-reliance on abstractions, combined with a poor understanding of the underlying processes, actually makes dealing with the problem at hand more complex in some cases.

See also:

Real-world examples:

The Law of Triviality

The Law of Triviality on Wikipedia

This law suggests that groups will give far more time and attention to trivial or cosmetic issues rather than serious and substantial ones.

The common fictional example used is that of a committee approving plans for nuclear power plant, who spend the majority of their time discussing the structure of the bike shed, rather than the far more important design for the power plant itself. It can be difficult to give valuable input on discussions about very large, complex topics without a high degree of subject matter expertise or preparation. However, people want to be seen to be contributing valuable input. Hence a tendency to focus too much time on small details, which can be reasoned about easily, but are not necessarily of particular importance.

The fictional example above led to the usage of the term 'Bike Shedding' as an expression for wasting time on trivial details.

The Unix Philosophy

The Unix Philosophy on Wikipedia

The Unix Philosophy is that software components should be small, and focused on doing one specific thing well. This can make it easier to build systems by composing together small, simple, well-defined units, rather than using large, complex, multi-purpose programs.

Modern practices like 'Microservice Architecture' can be thought of as an application of this law, where services are small, focused and do one specific thing, allowing complex behaviour to be composed of simple building blocks.

The Spotify Model

The Spotify Model on Spotify Labs

The Spotify Model is an approach to team and organisation structure which has been popularised by 'Spotify'. In this model, teams are organised around features, rather than technologies.

The Spotify Model also popularises the concepts of Tribes, Guilds, Chapters, which are other components of their organisation structure.

Wadler's Law

Wadler's Law on wiki.haskell.org

In any language design, the total time spent discussing a feature in this list is proportional to two raised to the power of its position.

  1. Semantics
  2. Syntax
  3. Lexical syntax
  4. Lexical syntax of comments

(In short, for every hour spent on semantics, 8 hours will be spent on the syntax of comments).

Similar to The Law of Triviality, Wadler's Law states what when designing a language, the amount of time spent on language structures is disproportionately high in comparison to the importance of those features.

See also:

Principles

Principles are generally more likely to be guidelines relating to design.

The Dilbert Principle

The Dilbert Principle on Wikipedia

Companies tend to systematically promote incompetent employees to management to get them out of the workflow.

Scott Adams

A management concept developed by Scott Adams (creator of the Dilbert comic strip), the Dilbert Principle is inspired by The Peter Principle. Under the Dilbert Principle, employees who were never competent are promoted to management in order to limit the damage they can do. Adams first explained the principle in a 1995 Wall Street Journal article, and expanded upon it in his 1996 business book, The Dilbert Principle.

See Also:

The Pareto Principle (The 80/20 Rule)

The Pareto Principle on Wikipedia

Most things in life are not distributed evenly.

The Pareto Principle suggests that in some cases, the majority of results come from a minority of inputs:

In the 1940s American-Romanian engineer Dr. Joseph Juran, who is widely credited with being the father of quality control, began to apply the Pareto principle to quality issues.

This principle is also known as: The 80/20 Rule, The Law of the Vital Few and The Principle of Factor Sparsity.

Real-world examples:

The Peter Principle

The Peter Principle on Wikipedia

People in a hierarchy tend to rise to their "level of incompetence".

Laurence J. Peter

A management concept developed by Laurence J. Peter, the Peter Principle observes that people who are good at their jobs are promoted, until they reach a level where they are no longer successful (their "level of incompetence". At this point, as they are more senior, they are less likely to be removed from the organisation (unless they perform spectacularly badly) and will continue to reside in a role which they have few intrinsic skills at, as their original skills which made them successful are not necessarily the skills required for their new jobs.

This is of particular interest to engineers - who initial start out in deeply technical roles, but often have a career path which leads to managing other engineers - which requires a fundamentally different skills-set.

See Also:

The Robustness Principle (Postel's Law)

The Robustness Principle on Wikipedia

Be conservative in what you do, be liberal in what you accept from others.

Often applied in server application development, this principle states that what you send to others should be as minimal and conformant as possible, but you should be aim to allow non-conformant input if it can be processed.

The goal of this principle is to build systems which are robust, as they can handle poorly formed input if the intent can still be understood. However, there are potentially security implications of accepting malformed input, particularly if the processing of such input is not well tested.

SOLID

This is an acronym, which refers to:

These are key principles in Object-Oriented Programming. Design principles such as these should be able to aid developers build more maintainable systems.

The Single Responsibility Principle

The Single Responsibility Principle on Wikipedia

Every module or class should have a single responsibility only.

The first of the 'SOLID' principles. This principle suggests that modules or classes should do one thing and one thing only. In more practical terms, this means that a single, small change to a feature of a program should require a change in one component only. For example, changing how a password is validated for complexity should require a change in only one part of the program.

Theoretically, this should make the code more robust, and easier to change. Knowing that a component which is being changed has a single responsibility only means that testing that change should be easier. Using the earlier example, changing the password complexity component should only be able to affect the features which relate to password complexity. It can be much more difficult to reason about the impact of a change to a component which has many responsibilities.

See also:

The Open/Closed Principle

The Open/Closed Principle on Wikipedia

Entities should be open for extension and closed for modification.

The second of the 'SOLID' principles. This principle states that entities (which could be classes, modules, functions and so on) should be able to have their behaviour extended, but that their existing behaviour should not be able to be modified.

As a hypothetical example, imagine a module which is able to turn a Markdown document into HTML. If the module could be extended to handle a newly proposed markdown feature, without modifying the module internals, then it would be open for extension. If the module could not be modified by a consumer so that how existing Markdown features are handled, then it would be closed for modification.

This principle has particular relevance for object-oriented programming, where we may design objects to be easily extended, but would avoid designing objects which can have their existing behaviour changed in unexpected ways.

See also:

The Liskov Substitution Principle

The Liskov Substitution Principle on Wikipedia

It should be possible to replace a type with a subtype, without breaking the system.

The third of the 'SOLID' principles. This principle states that if a component relies on a type, then it should be able to use subtypes of that type, without the system failing or having to know the details of what that subtype is.

As an example, imagine we have a method which reads an XML document from a structure which represents a file. If the method uses a base type 'file', then anything which derives from 'file' should be able to be used in the function. If 'file' supports seeking in reverse, and the XML parser uses that function, but the derived type 'network file' fails when reverse seeking is attempted, then the 'network file' would be violating the principle.

This principle has particular relevance for object-oriented programming, where type hierarchies must be modeled carefully to avoid confusing users of a system.

See also:

The Interface Segregation Principle

The Interface Segregation Principle on Wikipedia

No client should be forced to depend on methods it does not use.

The fourth of the 'SOLID' principles. This principle states that consumers of a component should not depend on functions of that component which it doesn't actually use.

As an example, imagine we have a method which reads an XML document from a structure which represents a file. It only needs to read bytes, move forwards or move backwards in the file. If this method needs to be updated because an unrelated feature of the file structure changes (such as an update to the permissions model used to represent file security), then the principle has been invalidated. It would be better for the file to implement a 'seekable-stream' interface, and for the XML reader to use that.

This principle has particular relevance for object-oriented programming, where interfaces, hierarchies and abstract types are used to minimise the coupling between different components. Duck typing is a methodology which enforces this principle by eliminating explicit interfaces.

See also:

The Dependency Inversion Principle

The Dependency Inversion Principle on Wikipedia

High-level modules should not be dependent on low-level implementations.

The fifth of the 'SOLID' principles. This principle states that higher level orchestrating components should not have to know the details of their dependencies.

As an example, imagine we have a program which read metadata from a website. We would assume that the main component would have to know about a component to download the webpage content, then a component which can read the metadata. If we were to take dependency inversion into account, the main component would depend only on an abstract component which can fetch byte data, and then an abstract component which would be able to read metadata from a byte stream. The main component would not know about TCP/IP, HTTP, HTML, etc.

This principle is complex, as it can seem to 'invert' the expected dependencies of a system (hence the name). In practice, it also means that a separate orchestrating component must ensure the correct implementations of abstract types are used (e.g. in the previous example, something must still provide the metadata reader component a HTTP file downloader and HTML meta tag reader). This then touches on patterns such as Inversion of Control and Dependency Injection.

See also:

The DRY Principle

The DRY Principle on Wikipedia

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

DRY is an acronym for Don't Repeat Yourself. This principle aims to help developers reducing the repetition of code and keep the information in a single place and was cited in 1999 by Andrew Hunt and Dave Thomas in the book The Pragmatic Developer

The opposite of DRY would be WET (Write Everything Twice or We Enjoy Typing).

In practice, if you have the same piece of information in two (or more) different places, you can use DRY to merge them into a single one and reuse it wherever you want/need.

See also:

YAGNI

YAGNI on Wikipedia

This is an acronym for You Aren't Gonna Need It.

Always implement things when you actually need them, never when you just foresee that you need them.

(Ron Jeffries) (XP co-founder and author of the book "Extreme Programming Installed")

This Extreme Programming (XP) principle suggests developers should only implement functionality that is needed for the immediate requirements, and avoid attempts to predict the future by implementing functionality that might be needed later.

Adhering to this principle should reduce the amount of unused code in the codebase, and avoid time and effort being wasted on functionality that brings no value.

See also:

Reading List

If you have found these concepts interesting, you may enjoy the following books.

TODO

Hi! If you land here, you've clicked on a link to a topic I've not written up yet, sorry about this - this is work in progress!

Feel free to Raise an Issue requesting more details, or Open a Pull Request to submit your proposed definition of the topic.