Awesome

Carloop

Make apps for your car using signals from OBD-II, CAN and GPS. Publish data online using the Particle platform.

The hardware and software is all open source!

Don't have one yet? Buy a Carloop here

Have questions? Ask the Carloop community.

Want to learn about Car Hacking? Read this book

Usage

#include "carloop/carloop.h"
Carloop<CarloopRevision2> carloop;

void setup()
{
    carloop.begin();
}

void loop()
{
    carloop.update();
    CANMessage message;
    if(carloop.can().receive(message)) {
        // Do awesome things with message!
    }
}

See complete examples in the examples directory.

Getting started

Follow these instructions on the community to create your first application using the Carloop library.

Learn about programming with the Particle platform at https://docs.particle.io

If you want to add a GPS, get the Carloop Pro

Documentation

`Carloop` object

Create a global Carloop object and specify the hardware revision (CarloopRevision2). Find this information on the Carloop circuit board (R2.1 means revision 2).

Call begin() in setup() and update() in loop().

Carloop<CarloopRevision2> carloop;

void setup() {
  carloop.begin();
}

void loop() {
  carloop.update();
}

`can()`

Read and write raw CAN messages.

void setup() {
    carloop.begin();
    Serial.begin(9600);
}

void loop() {
    carloop.update();
    CANMessage message;
    while(carloop.can().receive(message))
    {
        Serial.printf("ID %03x len %d", message.id, message.length);
        for(int i = 0; i < message.length; i++) {
            Serial.printf("%02x ", message.data[i]);
        }
        Serial.print("\n");
    }
}

See the documentation for the Particle CAN driver for more options.

`gps()`

If you have a GPS connected to the Carloop, you access GPS function through the TinyGPS object with carloop.gps(). To ensure that the GPS location doesn't update in the middle of reading it, surround the block where you extract the GPS data in a WITH_LOCK block.

WITH_LOCK(carloop.gps()) {
  float lat = carloop.gps().location.lat();
  float lng = carloop.gps().location.lng();
  bool gpsValid = carloop.gps().location.isValid();
}

See the TinyGPS library for detailed examples.

`battery()`

The voltage of the car battery. Make sure you call carloop.update() in the loop() function to update the battery voltage.

float battVoltage = carloop.battery();

TODO

OBD PID decoder. carloop["engine_speed"] to get engine speed.
OBD fault code reader.