Home

Awesome

Oidos

Oidos is a software synthesizer, based on additive synthesis, for making music for very small executables, such as 4 and 8 kilobyte intros.

You can follow the devopment on GitHub. For discussion, visit the Pouet forum.

Using the synth

The synth has two parts: a VST instrument, Oidos, and an accompanying VST effect, OidosReverb. The VSTs can in principle be used in any DAW, but the toolchain for using the music in an executable assumes that the music is made using Renoise.

Each instrument uses its own Oidos VST instance. The OidosReverb effect VST can be added as a Track DSP to add a reverb effect to some of the tracks.

The synth is quite computationally heavy, especially when the modes and fat parameters are set to high values. The VST internally caches the sound produced by each tone, so as it gets "warmed up" on particular instruments, it gets less heavy to work with. You will sometimes hear some stuttering in the sound the first time a tone is played. It can be useful to disable "overload prevention" in the Renoise settings.

To be able to convert your music into executable form, you must adhere to these guidelines:

Converting and playing the music

The OidosConvert program in the convert directory will convert a Renoise song using Oidos and OidosReverb into an assembly source file to be included with the supplied player source. See the oidos.h file for documentation on how to invoke the Oidos player.

Run the converter from the commandline with input and output file names, like this:

OidosConvert music.xrns music.asm

If your terminal supports ANSI escape codes and you want some nice colors for enhanced readability, use:

OidosConvert -ansi music.xrns music.asm

Pay close attention to the output from the converter, as it will tell you if it encountered an error along the way (for instance if one of the guidelines are violated).

If you are only interested in a stand-alone executable that just plays the music (for instance for an executable music compo), there is a complete setup for this in the easy_exe directory. It also produces a WAV writer, as required by many executable music compo rules.

Optimization

An important part of the workflow when producing music for a size-limited executable is optimizing the size and computation time requirements of the music. The OidosConvert program outputs some statistics about the music which can be used to guide this process:

Memory: The memory needed to store precomputed sound for this instrument. For each tone an instrument is played with, the sound is precomputed at the length of the longest note played by the instrument. Thus, the memory requirement is proportional to the product of these 2 factors:

The memory for precomputed sound is reused for every instrument. The maximum memory used for all instruments is printed at the end.

Burden: The total computation time requirements of all tracks using this instrument. The time requirement is a product of these 4 factors:

The total burden for all instruments is printed at the end, along with an estimate of the real time for a reasonably fast CPU.

Tones: Lists all the tones the instrument is played with. The number after the colon indicates how many times in the song the instrument is played with that tone.

Velocities: Lists all the velocities the instrument is played with. The velocity values are automatically quantized to the largest power of two dividing all used values (with 7F treated as 80). Sticking to more "round" values will reduce the number of bits required to represent each note velocity. The number after the colon indicates how many times in the song the instrument is played with that velocity.

Lengths: Lists all the lengths (distance from each note until the next note or OFF) in this column, with the number after the colon indicating how many times that length occurs in the column. If all notes in a column have the same length, a more compact representation of the track is used, omitting all OFFs.

Notes: Lists the tone/velocity combinations used in the column, with the number after the colon indicating how many times that combination occurs in the column. Notes are represented as indices into a list of these combinations, so reducing the number of combinations will typically reduce the size of the music.

Using reverb will add around 100 bytes to the compressed size for the reverb code and parameters. Using panning will usually add some 10-30 bytes depending on the number of instruments.

Also be sure to quantize all parameters, as described below.

Synth parameters

Oidos is an additive synthesizer, which means it produces sound by adding together a large number of sine waves, known as partials. The frequencies and amplitudes of these sine waves, along with their variation over time, determines the character of the sound. All of this is controlled by the VST parameters:

Seed

Random seed for all random choices in the synth. Changing this will often change the sound dramatically, even with the same values for the other parameters. Experimentation is the key here.

Modes

The partials are grouped into a number of modes - characteristic frequencies of the sound. This parameter specifies the number of modes.

Fat

Each mode contains a number of partials, grouped around the mode's center frequency. This parameter specifies the number of partials per mode.

Width

Controls how spread out the frequencies are of the partials belonging to the same mode.

Overtones

Controls the distribution of the center frequencies of the modes. The frequencies are randomly distributed between the base frequency (the played key) and this many semitones above the base frequency.

Sharpness

Controls how the amplitude of a mode depends on its frequency. With low sharpness, the amplitudes fall off strongly, resulting in a soft sound. With high sharpness, the amplitudes fall off less, or even rise with frequency, resulting in a sharp sound.

Harmonicity

If all frequencies in a sound are close to overtones (integer multiples) of the base frequency, the sound is perceived as harmonious. Harmonious instruments are used for the tonal parts of music. Disharmonious instruments are for instance drums, which don't have a specific tone.

The harmonicity parameter pulls the mode center frequencies towards (or pushes them away from) overtones of the base frequency in order to make the sound more or less harmonious.

Decay

The decaylow and decayhigh parameters control how quickly the amplitudes of modes fall off over time. They specify the falloff rate for low and high frequencies, respectively. The falloff of each frequency is determined by interpolating between these two values.

Filter

A filter is applied to the partials before summing them. The filterlow and filterhigh parameters specify the low and high limits of this filter, relative to the base frequency of the note. Frequencies outside these limits are discarded or attenuated. The fslopelow and fslopehigh parameters specify the sizes of the sloped regions at the filter limits, i.e. the frequencies which are (increasingly) attenuated before the filter cuts off completely. The fsweeplow and fsweephigh parameters specify the movement of the filter limits over time.

Gain

A non-linear distortion is applied to the summed partials. The gain parameter controls the strength of this distortion.

Attack

Specifies the attack time of the sound, i.e. the time before the sound reaches its full volume.

Release

Specifies the release time of the sound, i.e. the time before the sound reaches zero volume after the note is released.

Quantization

All parameters beginning with q are quantization parameters. These parameters round off the internal floating point representations of the parameters to "nicer" values which compress better, thereby reducing the compressed size of the parameter data.

When finalizing a piece of music, go through all the quantization parameters of all the instruments and pull them up as high as you can without ruining the sound.

The quantization parameters will show the quantized values of the quantized parameters, and so will the parameters themselves. You can adjust a parameter which has been quantized, at which point it will jump between the values allowed by the quantization.

Reverb parameters

The included reverb effect is a simple, "strength in numbers" reverb, which simply consists of a large number of filtered feedback delays.

The parameters are:

Mix

The strength of the reverb.

Pan

Panning of the reverb. Can be used to center the reverb of a non-centered reverb source.

Delay

Each feedback delay making up the reverb will have a feedback delay length randomly distributed between delaymin and delaymax. Additionally, the whole reverb will be delayed by delayadd.

Halftime

Controls how quickly the reverb dies out.

Filter

Filters the sound prior to the reverb. Frequencies below filterlow or above filterhigh will be attenuated.

Dampen

Dampens the sound as it goes around the feedback delays. Frequencies below dampenlow or above dampenhigh will be increasingly attenuated as the reverb progresses.

N

Number of feedback delays making up the reverb. The more delays, the smoother the reverb.

Seed

Random seed for the random delay lengths. Some seeds cause the delays to interfere with each other, resulting in faint echos and irregularities in the reverb. Experiment with the seed to finetune the reverb.

Quantization

All parameters beginning with q are quantization parameters, working the same way as described for the synth above.