Awesome

Katy OBD

A dialog-based ECU parsing tools of vehicle via OBD coded with Python.

Introduction

Electronic Control Unit (ECU): In automotive electronics, ECU is any embedded system that controls one or more of the electrical system or subsystems in a transport vehicle.Types of ECU include Electronic/engine Control Module (ECM), Powertrain Control Module (PCM), Transmission Control Module (TCM), Brake Control Module (BCM or EBCM), Central Control Module (CCM), Central Timing Module (CTM), General Electronic Module (GEM), Body Control Module (BCM), Suspension Control Module (SCM), control unit, or control module. Taken together, these systems are sometimes referred to as the car's computer (Technically there is no single computer but multiple ones.) Sometimes one assembly incorporates several of the individual control modules (PCM is often both engine and transmission).

On-board diagnostics (OBD) is an automotive term referring to a vehicle's self-diagnostic and reporting capability. OBD systems give the vehicle owner or repair technician access to the status of the various vehicle subsystems. Modern OBD implementations use a standardized digital communications port to provide real-time data in addition to a standardized series of diagnostic trouble codes, or DTCs, which allow one to rapidly identify and remedy malfunctions within the vehicle.

Katy OBD is a dialog-based application performing the data parser from ECU (Electronic Control Unit) built in consumer production automobiles via OBD port with a Bluetooth OBD connector. It can provide the information of ECU parameters including:

RPM
Speed
Coolant Temperature
Fuel Level
Intake Air Temperature
Intake Manifold Pressure
Throttle Position,

The GUI should be like this:

Run the Program

Install the OBD module of Python.

$ pip install obd

Download KatyOBD.py file from here, which is a Python source file only.
After downloading, run the KatyOBD.py to go as below:

$ python KatyOBD.py

The GUI of Katy OBD will run.

Instructions

Connect the OBD port with ELM327 Bluetooth OBD connector. The position of the OBD connector of your car is located under the dashboard in your cockpit.

Start the engine of your car.
Connect the OBD via Bluetooth using your Raspberry Pi.

Run Katy OBD as previously mentioned. When Katy OBD pop up, click Start button to initiate the extraction process of vehicle data, including RPM, speed, coolant temperature, fuel level, intake air temperature and throttle position information.

Original Interface of Katy OBD

Enhanced Interface of Katy OBD with Intake Manifold Pressure

When click the Stop button, you'll stop the parsing process.

License

The MIT License (MIT)

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.