Awesome

homeassistant-alphaESS

Monitor your energy generation, storage, and usage data using the official Open API from Alpha ESS

AlphaESS OpenAPI

In November 2023, AlphaESS introduced a new web API for their own web client and developers were officially encouraged to migrate to using the AlphaESS Open API published at https://open.alphaess.com/. This component has been updated to use that Open API. Anyone wanting to use this component in Home Assistant will first need to register their own inverter with the AlphaESS Open API developer portal.

Navigate to https://open.alphaess.com/ and chose the option to register an account.
Once registered and logged in follow the instructions from https://github.com/alphaess-developer/alphacloud_open_api to find your inverter SN and CheckCode
Add your inverter to the developer portal using your SN and CheckCode

Modifying existing installs to use the new OpenAPI

If you had previously been using this custom component in Home Assistant you will need to change to use the new authentication mechanism required by the AlphaESS OpenAPI.

First upgrade the HomeAssistant component to at least version 0.4.0 and then restart your HomeAssistant
In HomeAssistant navigate to Settings / Devices & Services / AlphaESS
Look for the pane labeled Integration entries and click on the "3 dots" menu to the right of your existing AlphaESS service.
Delete the existing AlphaESS service.
Click Add Entry to add a new AlphaESS service
Provide the AppID and AppSecret for your account on the Alpha ESS OpenAPI developer portal.
The new service will be created keeping the same entity/device names as before.

Installation using HACS

Use HACS, in `HACS > Integrations > Hamburger Menu > Custom Repositories add https://github.com/CharlesGillanders/homeassistant-alphaESS with category set to integration.
in HACS > Integrations > Explore & Add Repositories search for "alphaess".
Restart Home Assistant.
Enable Advanced Mode using Profile (click on your username at the bottom of the navigation column) -> Advanced Mode -> On
Log out of HomeAssistant and back in again
In the HA UI go to "Configuration" -> "Integrations" click "+" and search for "Alpha ESS".
You will be prompted for the AppID and AppSecret for your account on the Alpha ESS OpenAPI developer portal.

Manual Installation

Make a custom_components/alphaess folder in your Home Assistant file system.
Copy all the files and folders from this repository into the custom_components/alphaess folder
Restart Home Assistant
Enable Advanced Mode using Profile (click on your username at the bottom of the navigation column) -> Advanced Mode -> On
Log out of HomeAssistant and back in again
Setup this integration for your Alpha ESS energy storage system in Home Assistant via Configuration -> Integrations -> Add -> Alpha ESS
You will be prompted for the AppID and AppSecret for your account on the Alpha ESS OpenAPI developer portal.

Alpha ESS: GUI based Set Battery Charge/Discharge Times information

This is currently in early testing and comes with some caveats enforced by the OpenAPI and AlphaESS, This includes;

Charging can only be set once every 10 minutes
Discharging can only be set once every 10 minutes
The reset button calls both set Charging and set Discharging

Some values are set by default, this includes

updateChargeConfigInfo: gridcharge = 1
updateDisChargeConfigInfo: ctrDis = 0

Setting the bathighcap and batusecap only save it to hass data (making it persistent across restarts) and will only be applied when the respective button (or the reset button) is pressed

A error will be placed in the logs

The current charge config, discharge config and charging range will only update once the API is re-called (can be up to 1 min)

Services

This project allows you to use the following services in Home Assistant:

Alpha ESS: Set Battery Charge

This service call allows you to set the grid charge settings for your system. Times are not validated and must be compatible with the Alpha values. Data needed: - serial = The serial of your system. - enabled = True or False - cp1start = Charging Period 1 Start Time - cp1end = Charging Period 1 End Time - cp2start = Charging Period 2 Start Time - cp2end = Charging Period 2 End Time

example:

service: alphaess.setbatterycharge
data:
  serial: AA123456789
  enabled: True
  cp1start: "01:00"
  cp1end: "04:00"
  cp2start: "13:00"
  cp2end: "16:00"
  chargestopsoc: 100

Alpha ESS: Set Battery Discharge

This service call allows you to set the battery discharge settings for your system. Times are not validated and must be compatible with the Alpha values. Data needed: - serial = The serial of your system. - enabled = True or False - dp1start = Discharging Period 1 Start Time - dp1end = Discharging Period 1 End Time - dp2start = Discharging Period 2 Start Time - dp2end = Discharging Period 2 End Time