Home

Awesome

InfrasCal

Introduction

This C++ library supports the following tasks:

  1. Extrinsic infrastructure-based calibration of a multi-camera rig
  2. Intrinsic and extrinsic infrastructure-based calibration of a multi-camera rig

The following two camera models are supported in this library:

The infrastructure-based calibration runs in near real-time, and is strongly recommended if you are calibrating multiple rigs with mapping datasets.

The workings of the library are described in the three papers:

    Yukai Lin, Viktor Larsson, Marcel Geppert, Zuzana Kukelova, Marc Pollefeys, Torsten Sattler,
    Infrastructure-based Multi-Camera Calibration using Radial Projections, ECCV 2020.

    Lionel Heng, Mathias Bürki, Gim Hee Lee, Paul Furgale, Roland Siegwart, and Marc Pollefeys,
    Infrastructure-Based Calibration of a Multi-Camera Rig,
    In Proc. IEEE International Conference on Robotics and Automation (ICRA), 2014.
    
    Lionel Heng, Paul Furgale, and Marc Pollefeys,
    Leveraging Image-based Localization for Infrastructure-based Calibration of a Multi-camera Rig,
    Journal of Field Robotics (JFR), 2015.

If you use this library in an academic publication, please cite at least the following paper:

@InProceedings{Lin2020ECCV,
    author = {Yukai Lin and Viktor Larsson and Marcel Geppert and Zuzana Kukelova and Marc Pollefeys and Torsten Sattler},
    title = {{Infrastructure-based Multi-Camera Calibration using Radial Projections}},
    booktitle = {European Conference on Computer Vision (ECCV)},
    year = {2020},
}

Depending on which parts of the library you use, please cite the appropriate papers from the list above.

Acknowledgements

The InfrasCal library includes third-party code from the following sources:

    1. Lionel Heng, Bo Li, and Marc Pollefeys,
       CamOdoCal: Automatic Intrinsic and Extrinsic Calibration of a Rig
       with Multiple Generic Cameras and Odometry,
       https://github.com/hengli/camodocal

    2. Sameer Agarwal, Keir Mierle, and Others,
       Ceres Solver.
       https://code.google.com/p/ceres-solver/
    
    3. D. Galvez-Lopez, and J. Tardos,
       Bags of Binary Words for Fast Place Recognition in Image Sequences,
       IEEE Transactions on Robotics, 28(5):1188-1197, October 2012.

    4. L. Kneip, D. Scaramuzza, and R. Siegwart,
       A Novel Parametrization of the Perspective-Three-Point Problem for a
       Direct Computation of Absolute Camera Position and Orientation,
       In Proc. IEEE Conference on Computer Vision and Pattern Recognition, 2011.

    5. pugixml
       http://pugixml.org/

    6. Changchang wu,
       SiftGPU: A GPU implementation of David Lowe's Scale Invariant Feature Transform
       http://cs.unc.edu/~ccwu
       
    7. Viktor Larsson, Torsten Sattler, Zuzana Kukelova and Marc Pollefeys,
       Revisiting Radial Distortion Absolute Pose.
       https://github.com/vlarsson/radialpose

Build Instructions for Ubuntu

Required dependencies

Optional dependencies

Tested configuration versions

  1. Before you compile the repository code, you need to install the required dependencies, and install the optional dependencies if required.

    • Install Cuda

    • Build required dependencies

      sudo apt-get install cmake git gcc-6 g++-6 libopenblas-dev libblas-dev libeigen3-dev libgoogle-glog-dev 
      sudo apt-get install build-essential libgl1-mesa-dev libglu1-mesa-dev freeglut3-dev libglew-dev
      sudo apt-get install libatlas-base-dev libsuitesparse-dev libsqlite3-dev libceres-dev libboost-all-dev
      
    • Build Opencv

      mkdir -p ~/dev && cd ~/dev
      git clone --depth 1 --branch 3.4.2 https://github.com/opencv/opencv.git
      git clone --depth 1 --branch 3.4.2 https://github.com/opencv/opencv_contrib.git
      cd opencv && mkdir build && cd build
      CC=/usr/bin/gcc-6 CXX=/usr/bin/g++-6 cmake .. -DWITH_CUDA=ON -DCMAKE_BUILD_TYPE=Release \
      -DOPENCV_EXTRA_MODULES_PATH=../../opencv_contrib/modules -DOPENCV_ENABLE_NONFREE:BOOL=ON \
      -DCUDA_NVCC_FLAGS=--expt-relaxed-constexpr
      make -j8
      sudo make install
      
  2. Build the code.

    mkdir -p ~/dev && cd ~/dev
    git clone https://github.com/youkely/InfrasCal.git 
    cd InfrasCal && mkdir build && cd build
    CC=/usr/bin/gcc-6 CXX=/usr/bin/g++-6 cmake -DCMAKE_BUILD_TYPE=Release ..
    make -j8
    

Examples

Go to the source folder. To see all allowed options for each executable, use the --help option which shows a description of all available options.

  1. Infrastructure-based calibration

     ./build/bin/infrastr_calib --camera-count 5 \
     --output ./data/demo/results \
     --map ./data/demo/map \
     --database ./data/demo/map/database.db \
     --input ./data/demo/ \
     --vocab ./data/vocabulary/sift128.bin \
     -v --camera-model pinhole-radtan --save
    

    The camera-model parameter takes one of the following two values: pinhole-radtan, and pinhole-equi(kannala-brandt).

    The calibration mode takes one of the following options: InRaSU(default, corresponds to Inf+1DR+RA in the ECCV2020 paper), In(Inf+K), InRI(Inf+K+RI), InRa(Inf+RD), InRaS(Inf+RD+RA)