Home

Awesome

micropython-ntpclient

A uasyncio based NTP client for ESP32 boards running micropython.

At this moment this code only works on boards with a custom build micropython firmware.

Please go to https://forum.micropython.org/viewtopic.php?f=15&t=7567 for discussion and questions.

The following commit was never accepted by the upstream project. In order to make the utime.adjtime() function available please apply the included patch esp32_adjtime.diff and build a custom micropython image.

Required commit to be cherry-picked for ESP32: https://github.com/wieck/micropython/commit/cd80a9aba99a68af7e295067fa7d35383ccef640

Installation and testing

The ntpclient module requires the above commit(s) to be cherry-picked into a custom build of micropython. For the ESP32 it adds the utime.adjtime() function that uses the adjtime(3) function of the ESP32 SDK.

Once your board is flashed with that custom build, upload the ntpclient directory and ntpclient_test[12].py scripts. You also need to upload a boot.py that enables WiFi and connects to your WLAN.

Then use a REPL prompt and

import ntpclient_test1
ntpclient_test1.run(pps = 17, host = 'my.local.ntp.host.addr', debug=True)

Replace "my.local.ntp.host.addr" with your local NTP server. If you don't have one, you can omit the whole "host=" kwarg and it will default to "pool.ntp.org". But be warned, those have unpredictably asynchronous delays in packet travel.

The above will run a uasyncio task that prints the current time every second as well as producing a 100ms pulse on the specified "pps" pin. The ntpclient will be running in the background, constantly adjusting the boards RTC.

Please note that attempting to slew a RTC while using deep sleep is not going to work. The ntpclient needs to adjust or calibrate the RTC every 2 seconds in order to be considered "in sync".

If you have an SSD1306 OLED display you can also use ntpclient_test2.

import ntpclient_test2
ntpclient_test2.run(pps = 17, host = 'my.local.ntp.host.addr', scl = 22, sda = 21, debug=True)

Congratulations, you now have an NTP based clock that displays UTC.

Syntax

ntpclient.ntpclient(**kwargs)

kwargs:
  
  host=HOSTNAME     Hostname of the NTP server to use (default pool.ntp.org).

  poll=SECONDS      Maximum poll interval (default 1024). ntpclient will
                    dynamically increase/decrease the polling interval based
                    on current instability between 64 and this maximum
                    number of seconds.
  
  max_startup_delta=SECONDS
                    Number of seconds of clock difference at which
                    ntpclient will perform a hard set of the clock on
                    startup instead of slewing the clock (default 1).

  debug=BOOL        Flag to make ntpclient emit debug messages on stdout
                    for diagnostics.

Example

include ntpclient
ntpclient.ntpclient(host = 'ntpserver.localdomain')

Saving Drift information

On the ESP32 port an optional keyword argument to the ntpclient instance is the path for a "drift_file". In this file ntpclient will periodically save drift information to speed up synchronization on subsequent reboots.

Implementation Notes