Awesome

Buildrrot for RISC-V 64 NOMMU

Buildroot is a simple, efficient and easy-to-use tool to generate embedded Linux systems through cross-compilation.

The documentation can be found in docs/manual. You can generate a text document with 'make manual-text' and read output/docs/manual/manual.text. Online documentation can be found at http://buildroot.org/docs.html

To build and use the buildroot stuff, do the following:

run 'make menuconfig'
select the target architecture and the packages you wish to compile
run 'make'
wait while it compiles
find the kernel, bootloader, root filesystem, etc. in output/images

You do not need to be root to build or run buildroot. Have fun!

Buildroot comes with a basic configuration for a number of boards. Run 'make list-defconfigs' to view the list of provided configurations.

Please feed suggestions, bug reports, insults, and bribes back to the buildroot mailing list: buildroot@buildroot.org You can also find us on #buildroot on Freenode IRC.

If you would like to contribute patches, please read https://buildroot.org/manual.html#submitting-patches

For riscv64 nommu uClibc toolchain build

$ make riscv64_nommu_defconfig
$ make

The compiled toolchain is in output/host. Copy this somewhere:

$ sudo cp -r output/host /opt/riscv64-uclibc

To compile a minimal busybox suitable for low-memory nommu system, use this toolchain together with the minimal configuration file provided.

$ cd riscv64-uclibc-nommu/
$ git clone git://git.busybox.net/busybox.git
$ cd busybox
$ make buildroot/riscv64-uclibc-nommu/busybox-small.config
$ make SKIP_STRIP=y
$ make install

The base files usable for an initramfs image can be found in the directory _install/.

For conveniance, a precompiled toolchain, a set of initramfs files and its cpio image file are present in the riscv64-uclibc-nommu directory.

For Kendryte K210 boards

The built (or precompiled) initramfs cpio image file can be used as the default k210.cpio initramfs builtin the kernel (as referenced by nommu_k210_defconfig).