Home

Awesome

SlicerA

A self hosted, web based STL to Gcode slicer

Installation

Requirement

Build

  1. Clone this repo into your ArozOS subservice directory (usually can be found under ~/arozos/subservice).

    cd ~/arozos/subservice/
    git clone https://github.com/tobychui/SlicerA
    cd SlicerA
    
  2. Build the SlicerA subservice using the build.sh bash script

    ./build.sh
    
    # Optional, depends on your permission settings
    sudo chmod 755 -R ./
    
  3. Restart arozos using systemctl

    sudo systemctl restart arozos
    

Update GoSlice binary

To update GoSlice binary, use the update.sh script located inside goslice/. You will also need to clone to GoSlice repo into the goslice/ folder inorder for the update script to work.

Usage

Use as ArozOS Subservice

To use SlicerA, you can first upload some STL files to your ArozOS cloud desktop and follow the steps below

  1. Load STL Model using the top right hand corner button or the "1. Load STL Model " button
  2. Click "Slice to Gcode". Wait until it complete and check the finished gcode for any issues in slicing
  3. Click "Save to File" if the gcode file looks good.

Use as standalone web application

To use SlicerA without ArozOS, build the application with standard go building procedures.

cd ./SlicerA
go build

Next, setup the permission for to goslice binaries and start the application with the following command

sudo chmod 755 -R ./goslice
./SlicerA
>> SlicerA started. Listening on :80

Then, navigate to http://localhost for using the standalone web slicer interface.

You can also change the port where it listen to using - port flag as follows

./SlicerA -port :8080

Screenshots

And after export, you can see your gcode file in the location you selected.

Interface under standalone mode

License

Please see the LICENSE file

Special Thanks

This project is powered by the amazing Golang written STL to Gcode slicer named GoSlice

The STL Viewer in standalone mode is powered by viewstl licensed under MIT. See web/script/viewstl/LICENSE for more information.

The gcode viewer is powered by the gcode-viewer library which is also licensed under MIT.