Home

Awesome

ImageView.jl

An image display GUI for Julia.

Installation

To install the ImageView package:

Pkg.add("ImageView")

Preparation

First let's try it with a photograph. If you have an image on your computer, load it this way:

using ImageView, Images
img = load("my_photo.jpg")

Any typical image format should be fine, it doesn't have to be a jpg. The TestImages package contains several standard images:

using TestImages
img = testimage("mandrill")

Demonstration of the GUI

For simplicity, you should first test ImageView at the REPL prompt or in an IDE; script usage is discussed later below.

You can view the image using imshow:

imshow(img)

You should get a window with your image:

photo

You can use imshow() if you want to choose an image using a file dialog.

Try resizing the image window by dragging one of its corners; you'll see that the aspect ratio of the image is preserved when you resize. If instead you want the image to fill the pane, try imshow(img, aspect=:none). Here's a comparison of the two:

aspect=:auto (default)aspect=:none
photophoto

Next, Ctrl-click and drag somewhere inside the image. You'll see the typical rubberband selection, and once you let go the image display will zoom in on the selected region. Again, the aspect ratio of the display is preserved. If you click on the image without holding down Ctrl, you can drag the image to look at nearby regions. Ctrl-double-click on the image to restore the full region.

If you have a wheel mouse, zoom in again and scroll the wheel, which should cause the image to pan vertically. If you scroll while holding down Shift, it pans horizontally; hold down Ctrl and you affect the zoom setting. Note as you zoom via the mouse, the zoom stays focused around the mouse pointer location, making it easy to zoom in on some small feature simply by pointing your mouse at it and then Ctrl-scrolling.

You can view the image upside-down with

imshow(img, flipy=true)

(flipx flips the image horizontally) or switch the horizontal and vertical axes with

imshow(img, axes=(2,1)).

The window can be closed using Ctrl-W (use Cmd-W on a Mac). All windows opened by ImageView can be closed using Ctrl-Shift-W (Cmd-Shift-W on a Mac). Fullscreen can be toggled using F11 (on Linux or Windows, use Cmd-Shift-F on a Mac).

For movies, 3D, and 4D images, ImageView will create a "player" widget.

img = testimage("mri")
imshow(img)

The "mri" image is an AxisArray, and consequently you can select axes by name:

imshow(img, axes=(:S, :P), flipy=true)  # a sagittal plane (Superior, Posterior)
imshow(img)imshow(img, axes=(:S, :P), flipy=true)
photophoto

Finally, right-clicking on the image yields context menu that allows you to save the image shown in the viewer (including annotations) to a PNG file or to the clipboard, and a brightness/contrast GUI:

Contrast GUI snapshot

You can adjust the contrast by adjusting the sliders or by entering values into the text boxes.

Programmatic usage

Simple command-line utilities

ImageView.closeall() closes all open windows.

You can place multiple images in the same window using imshow_gui:

using ImageView, TestImages, Gtk4
gui = imshow_gui((300, 300), (2, 1))  # 2 columns, 1 row of images (each initially 300×300)
canvases = gui["canvas"]
imshow(canvases[1,1], testimage("lighthouse"))
imshow(canvases[1,2], testimage("mandrill"))
show(gui["window"])

canvasgrid snapshot

gui["window"] returns the window; gui["canvas"] either returns a single canvas (if there is just one), or an array if you've specified a grid of canvases.

Gtk4.show(win) is sometimes needed when using the lower-level utilities of this package. Generally you should call it after you've finished assembling the entire window, so as to avoid redraws with each subsequent change.

The dictionary and region-of-interest manipulations

imshow returns a dictionary containing a wealth of information about the state of the viewer. Perhaps most interesting is the "roi" entry, which itself is another dictionary containing information about the current selected region or interest. These are Observables signals, and consequently you can even manipulate the state of the GUI by push!ing new values to these signals.

For example, using the "mri" image above, you can select the 5th slice with

guidict = imshow(img)
guidict["roi"]["slicedata"].signals[1][] = 5

SliceData objects contain information about which axes are displayed and the current slice indices of those axes perpendicular to the view plane. Likewise, "image roi" contains the actual image data currently being shown in the window (including all zoom/slice settings).

The "zoom"- and "pan"-related signals originate from GtkObservables, and users should see the documentation for that package for more information.

Coupling two or more images together

imshow allows you to pass many more arguments; please use ?imshow to see some of the options. We can use these extra arguments to couple the zoom and slice regions between two images. Let's make a "fake" image encoding the segmentation of an image:

using ImageView, GtkObservables, TestImages, Images

# Prepare the data
mri = testimage("mri")
mriseg = RGB.(mri)
mriseg[mri .> 0.5] .= colorant"red"

Now we display the images:

guidata = imshow(mri, axes=(1,2))
zr = guidata["roi"]["zoomregion"]
slicedata = guidata["roi"]["slicedata"]
imshow(mriseg, nothing, zr, slicedata)

Here we used imshow to create the first window, and then extracted the zoomregion and slicedata information from that display and used them to initialize a second window with the second image. If you zoom, pan, or change the slice plane in one window, it makes the same change in the other.

Alternatively, you can place both displays in a single window:

zr, slicedata = roi(mri, (1,2))
gd = imshow_gui((200, 200), (1,2); slicedata=slicedata)
imshow(gd["frame"][1,1], gd["canvas"][1,1], mri, nothing, zr, slicedata)
imshow(gd["frame"][1,2], gd["canvas"][1,2], mriseg, nothing, zr, slicedata)

You should see something like this:

coupled

Annotations

You can add and remove various annotations to images (currently text, points, and lines). There are two basic styles of annotation: "anchored" and "floating." An "anchored" annotation is positioned at a particular pixel location within the image; if you zoom or pan, the annotation will move with the image, and may not even be shown if the corresponding position is off-screen. In contrast, a "floating" annotation is not tied to a particular location in the image, and will always be displayed at approximately the same position within the window even if you zoom or pan. As a consequence, "anchored" annotations are best for labeling particular features in the image, and "floating" annotations are best for things like scalebars.

Here's an example of adding a 30-pixel scale bar to an image:

guidict = imshow(img)
scalebar(guidict, 30; x = 0.1, y = 0.05)

x and y describe the center of the scale bar in normalized coordinates, with (0,0) in the upper left. In this example, the length of the scale bar is in pixels, but if you're using the Unitful package for the image's pixelspacing, then you should set the length to something like 50μm.

The remaining examples are for fixed annotations. Here is a demonstration:

using Images, ImageView
z = ones(10,50);
y = 8; x = 2;
z[y,x] = 0
guidict = imshow(z)
idx = annotate!(guidict, AnnotationText(x, y, "x", color=RGB(0,0,1), fontsize=3))
idx2 = annotate!(guidict, AnnotationPoint(x+10, y, shape='.', size=4, color=RGB(1,0,0)))
idx3 = annotate!(guidict, AnnotationPoint(x+20, y-6, shape='.', size=1, color=RGB(1,0,0), linecolor=RGB(0,0,0), scale=true))
idx4 = annotate!(guidict, AnnotationLine(x+10, y, x+20, y-6, linewidth=2, color=RGB(0,1,0)))
idx5 = annotate!(guidict, AnnotationBox(x+10, y, x+20, y-6, linewidth=2, color=RGB(0,0,1)))
# This shows that you can remove annotations, too:
delete!(guidict, idx)

This is what this looks like before delete!ing the first annotation:

annotations

If you have a grid of images, then each image needs its own set of annotations, initialized by calling annotations():

using ImageView, Images, Gtk4
# Create the window and a 2x2 grid of canvases, each 300x300 pixels in size
gui = imshow_gui((300, 300), (2, 2))
canvases = gui["canvas"]
# Create some single-color images (just for testing purposes)
makeimage(color) = fill(color, 100, 100)
imgs = makeimage.([colorant"red" colorant"green";
                   colorant"blue" colorant"purple"])
# Create empty annotations structures for each canvas
anns = [annotations() annotations();
        annotations() annotations()]
# Draw the images on the canvases. Note that we supply the annotation object for each.
roidict = [imshow(canvases[1,1], imgs[1,1], anns[1,1]) imshow(canvases[1,2], imgs[1,2], anns[1,2]);
           imshow(canvases[2,1], imgs[2,1], anns[2,1]) imshow(canvases[2,2], imgs[2,2], anns[2,2])]
# Now we'll add an annotation to the lower-right image
annotate!(anns[2,2], canvases[2,2], roidict[2,2], AnnotationBox(5, 5, 30, 80, linewidth=3, color=RGB(1,1,0)))

grid annotations

Annotation API

AnnotationText(x, y, str;
               z = NaN, t =  NaN,
               color = RGB(0,0,0), angle = 0.0, fontfamily = "sans", fontsize = 10,
               fontoptions = "",  halign = "center", valign = "center", markup = false, scale=true)

Place str at position (x,y).

Properties:

AnnotationPoints([xy | xys | x, y];
                 z = NaN, t = NaN, size=10.0, shape::Char='x',
                 color = RGB(1,1,1), linewidth=1.0, linecolor=color, scale::Bool=false)

Annotate the point xy, (x,y), or the points xys. xys maybe a Vector of tuples Vector{(Real,Real)}, or a 2 x N Matrix. Points are assumed to be in (x,y) order. (TODO: this could be generalized, as with lines.)

Properties:

AnnotationLines(line | lines | c1,c2,c3,c4;
                z = NaN, t = NaN,
                color = RGB(1,1,1), linewidth=1.0, coord_order="xyxy")

Draw line, lines, or the line with coordinates (c1,c2,c3,c4). line is specified as a tuple of point tuples, ((x1,y1),(x2,y2)). lines may be a Vector of such lines, or a 4 x N matrix. For a matrix or when specifying coordinates independently, the coordinate order is specified by coord_order, which defaults to "xyxy".

Properties:

AnnotationBox(left, top, right, bottom | (x1,y1), (x2,y2) | bb::Graphics.BoundingBox;
              z = NaN, t = NaN,
              color = RGB(1,1,1), linewidth=1.0, coord_order="xyxy")

Draw a box. Box can be specified using four values for (left, top, right, bottom), as a pair of tuples, (x1,y1),(x2,y2), or as a BoundingBox. The coordinate order the pair of tuples may be specified by coord_order, which defaults to "xyxy".

Properties:

Additional notes

Calling imshow from a script file

If you call Julia from a script file, the GLib main loop (which is responsible for handling events like mouse clicks, etc.) will not start automatically, and the julia process will terminate at the end of the program. This will cause any windows opened with imshow() to terminate, which is probably not what you intend. We want to start the main loop and then make it only terminate the process when the image window is closed. Below is some example code to do this:

using Images, ImageView, TestImages, Gtk4

img = testimage("mandrill")
guidict = imshow(img);

#If we are not in a REPL
if (!isinteractive())

    # Create a condition object
    c = Condition()

    # Get the window
    win = guidict["gui"]["window"]
    
    # Start the GLib main loop
    @async Gtk4.GLib.glib_main()

    # Notify the condition object when the window closes
    signal_connect(win, :close_request) do widget
        notify(c)
    end

    # Wait for the notification before proceeding ...
    wait(c)
end

This will prevent the julia process from terminating immediately. Note that if we did not call signal_connect, the process will keep waiting even after the image window has closed, and you will have to manually close it with CTRL + C.

If you are opening more than one window you will need to create more than one Condition object, if you wish to wait until the last one is closed. See (here)[https://juliagtk.github.io/Gtk4.jl/dev/howto/nonreplusage/] for more information.