Home

Awesome

Build Status Join the chat at https://gitter.im/theonestack/cfhighlander

Intro

Cfhighlander is a feature rich tool and DSL for infrastructure coders working with CloudFormation templates.

It was designed to

Installation

gem install cfhighlander

Example

Passing output value from one substack to another substack within root stack has to be done manually - either if you build JSON/YAML templates by hand, or if using Cfndsl. With cfhighlander, this code is automatically generated for you

## place contents below in file name application.cfhighlander.rb
CfhighlanderTemplate do

  # explicit configuration for vpc component
  vpc_config = { 'maximum_availability_zones' => 2 }

  # declare vpc component, and pass some parameters
  # to it
  Component name: 'vpc',
        template: 'vpc@master.snapshot',
        config: vpc_config do
    parameter name: 'Az0', value: FnSelect(0,FnGetAZs())
    parameter name: 'Az1', value: FnSelect(1,FnGetAZs())
    parameter name: 'DnsDomain', value: 'example.com'
    parameter name: 'StackMask', value: '16'
  end

  # Compiled cloudformation template will
  # pass Compute subnets from VPC into ECS Cluster
  Component name: 'ecs', template:'ecs@master.snapshot' do
    parameter name: 'DnsDomain', value: 'example.com'
  end

  # feed mapping maparameters to components
  addMapping('EnvironmentType',{
    'development' => {
      'MaxNatGateways'=>'1',
      'EcsAsgMin' => 1,
      'EcsAsgMax' => 1,
      'KeyName' => 'default',
      'InstanceType' => 't2.large',
      'SingleNatGateway' => true
    }
  })
end

... compile the template with ...

cfcompile application

... and check how the subnets are being passed around ..

$ cat out/yaml/application.compiled.yaml | grep  -A3 SubnetCompute0
          SubnetCompute0:
            Fn::GetAtt:
            - vpc
            - Outputs.SubnetCompute0
          SubnetCompute1:
            Fn::GetAtt:
            - vpc

Component library

As part of theonestack org, there are many publicly available components.

You can easily test any of these. Automatic component resolver will default to 'https://github.com/theonestack/hl-component-$name' location if component is not found in local sources.

From shell, command below will generate cloudformation for given component in out folder

cfcompile component_name

Or from outer cfhighlander template, just pull component using Component DSL statement

CfhighlanderTemplate do
  Component component_name
end

How it works ?

Highlander DSL produces CloudFormation templates in 4 phases

Each phase (aside from parameter wiring) above is executable as stand-alone through CLI, making development of Highlander templates easier by enabling debugging of produced configuration and cfndsl templates.

Highlander components

Highlander component is located on local file system or S3 location with following files defining them

Terminology

Component is basic building block of highlander systems. Components have following roles

Outer component is component that defines other component via cfhighlander dsl Component statement. Defined component is called inner component. Components defined under same outer component are sibling components

Usage

You can either pull highlander classes in your own code, or more commonly use it via command line interface (cli). For both ways, highlander is distributed as ruby gem

$ gem install cfhighlander
$ cfhighlander help
cfhighlander commands:
  cfhighlander cfcompile component[@version] -f, --format=FORMAT   # Compile Highlander component to CloudFormation templates
  cfhighlander cfpublish component[@version] -f, --format=FORMAT   # Publish CloudFormation template for component, and it' referenced subcomponents
  cfhighlander configcompile component[@version]                   # Compile Highlander components configuration
  cfhighlander dslcompile component[@version] -f, --format=FORMAT  # Compile Highlander component configuration and create cfndsl templates
  cfhighlander help [COMMAND]                                      # Describe available commands or one specific command
  cfhighlander publish component[@version] [-v published_version]  # Publish CloudFormation template for component, and it' referenced subcomponents

Working directory

All templates and configuration generated are placed in $WORKDIR/out directory. Optionally, you can alter working directory via CFHIGHLANDER_WORKDIR environment variable.

Commands

To get full list of options for any of cli commands use highlander help command_name syntax

$ cfhighlander help publish
Usage:
  cfhighlander publish component[@version] [-v published_version]

Options:
      [--dstbucket=DSTBUCKET]  # Distribution S3 bucket
      [--dstprefix=DSTPREFIX]  # Distribution S3 prefix
  -v, [--version=VERSION]      # Distribution component version, defaults to latest

Publish CloudFormation template for component,
            and it's referenced subcomponents

Silent mode

Cfhighlander DSL processor has built-in support for packaging and deploying AWS Lambda functions. Some of these lambda functions may require shell command to be executed (e.g. pulling library dependencies) prior their packaging in ZIP archive format. Such commands are potential security risk, as they allow execution of arbitrary code, so for this reason user agreement is required e.g:

Packaging AWS Lambda function logMessage...
Following code will be executed to generate lambda function logMessage:

pip install requests -t lib

Proceed (y/n)?

In order to avoid user prompt pass -q or --quiet switch to CLI for commands that require Lambda packaging (dslcompile, cfcompile, cfpublish)

cfcompile

cfcompile will produce cloudformation templates in specified format (defaults to yaml). You can optionally validate produced template via --validate switch. Resulting templates will be placed in $WORKDIR/out/$format

cfpublish

cfcompile will produce cloudformation templates in specified format (defaults to yaml), and publish them to S3 location. You can optionally validate produced template via --validate switch. Resulting templates will be placed in $WORKDIR/out/$format, and published to s3://$distributionBucket/$distributionPrefix/$distributionVersion. All S3 path components can be controlled via CLI (--dstbucket, --dstprefix, -v). Default distribution bucket and prefix can be also be controlled via DSL using DistributionBucket, DistributionBucket, DistributionPrefix or ComponentDistribution statements. Check DSL specification for more details on this statements. Version defaults to latest if not explicitly given using -v switch

If no distribution options is given using mentioned CLI options or DSL statements, bucket will be automatically created for you. Bucket name defaults to $ACCOUNT.$REGION.cfhighlander.templates, with /published-templates prefix.

cfpublish command will give you quick launch CloudFirmation stack URL to assist you in creating your stack:

$ cfpublish vpc@1.2.0
...
...
...

Use following url to launch CloudFormation stack

https://console.aws.amazon.com/cloudformation/home#/stacks/create/review?filter=active&templateURL=https://123456789012.ap-southeast-2.cfhighlander.templates.s3.amazonaws.com/published-templates/vpc/1.2.0/vpc.compiled.yaml&stackName=vpc

configcompile

configcompile produces configuration yamls that are passed as external configuration when processing cfndsl templates. Check component configuration section for more details.

dslcompile

dslcompile will produce intermediary cfndsl templates. This is useful for debugging cfhighlander components

publish

publish command publishes cfhighlander components source code to s3 location (compared to cfpublish which is publishing compiled cloudformation templates). Same CLI / DSL options apply as for cfpublish command. Version defaults to latest

Component configuration

Default configuration values

Within each template, following configuration values are available by default in both cfhl and cfndsl templates

Defining and overriding configuration

There are 4 levels of component configuration


# some configuration values

components:
  vpc:
    config:
      maximum_availibility_zones: 2

This configuration level overrides component's own config file. Alternatively, to keep things less nested in configuration hierarchy, creating config file vpc.config.yaml for component named vpc works just as well:


# contents of vpc.config.yaml in outer component, defining vpc component

# line below prevents component configuration file being merged with outer component configuration
subcomponent_config_file: true

# there is no need for components/vpc/config structure, it is implied by file name
maximum_availibility_zones: 3



CfhighlanderTemplate do

# ...
# some dsl code
# ...

   Component template:'vpc@latest',config: {'maximum_availibility_zones' => 2}

end

Configuration done this way will override any outer component config coming from configuration file

ecs_cluster_name: ApplicationCluster

subnets:
  ecs_cluster:
    name: ECSCluster
    type: private
    allocation: 20

config_export:  
  global:
    - ecs_cluster_name

  component:
    vpc:
      - subnets

Configuration is exported AFTER component local config, and outer component configurations are loaded. Outer component configuration takes priority over exported configuration, as this configuration is loaded once more once component exported conifgurations are applied to appropriate components.

To change NAME of targeted component (e.g. from vpc to vpc1), you can use export_config named parameter on Component dsl method In addition to configuration in inner component above, wiring of targeted component for export would be done like

Component name: 'vpc1', template: 'vpc'
Component name: 'ecs_cluster', template: 'ecs_cluster@latest', export_config: {'vpc' => 'vpc1'}

CloudFormation mappings

CloudFormation Mappings section matches a key to a corresponding set of named values. Highlander allows you to define this mappings in two ways

  1. By using static maps defined through YAML files. Place *.mappings.yaml file alongside with highlander template to define mappings this way. Mappings defined in a static way are automatically rendered withing CloudFormation template E.g.
# Master component mappings
# envtype.mappings.yaml
EnvironmentType:
  dev:
    InstanceType: t2.medium
  prod:
    InstanceType: m4.medium
  1. By defining mappings dynamically through Ruby code. Alongside with mappings, you can define default map name, and default map key to be used when looking up value within this map. This mappings are usually rendered in outer component when inner components pulls mapping value as parameter via MappingParam statement. Optionally, this mappings can be rendered within component that defines them using DynamicMappings DSL statement.

Extensions

Cfndsl extensions

In order to make template more DRY, template developer may reuse ruby functions. It is possible to place such functions in separate files. Any ruby files placed within ext/cfndsl directory will get automatically included via Ruby require function in compiled Cfndsl template.

Component DSL

Inner components or subcomponents

Inner components or subcomponents are defined via Component DSL statement

CfhighlanderTemplate do

  # Example1 : Include component by template name only
  Component 'vpc'

  # Example2 : Include component by template name, version and give it a name
  Component template: 'ecs@master.snapshot'

end

Conditional components - If you want to add top level paramater as feature toggle for one of the inner components, just mark it as conditional, using conditional: named parameter. In addition to this, default value for feature toggle can be supplied using enabled: named parameter. Autogenerated parameter will be named Enable$COMPONENTNAME, defaulting to [true,false] as set of allowed values. Autogenerated condition will be named same as parameter, and checking if the parameter value equlas true


# Include vpc and 2 ecs clusters with feature flags
CfhighlanderTemplate do

  # vpc component
  Component 'vpc'

  # Ecs Cluster 1 has feature toggle, enabled by default
  Component name: 'ecs1', template: 'ecs', conditional: true

  # Ecs Cluster 2 has feature toggle, and is explicitly disabled by default
  Component name: 'ec2', template: 'ecs', conditional: true, enabled: false

end

Override default behaviour - If you have more than 1 stack you want to control with a single parameter, or you want to change parameter name, you can supply the condition: option with a string value on each component you want to control with the condition. Autogenerated condition can be overriden as well, by defining your own condition with the same name on the highlander template, as in example below.

CfhighlanderTemplate do
  
  # [Optional - Define your own condition, instead of default true/false one]
  Condition 'EnableDevelopmentResources', FnEquals(Ref(:EnvironmentName),'dev')

  # Components always required
  Component 'vpc'
  Component name: 'ecs', template: 'ecs'
  
  # Components only required in development environments with common condition name
  Component name: 'linux-bastion', template: 'bastion', conditional: true, condition: 'EnableDevelopmentResources', enabled: false
  Component name: 'windows-bastion', template: 'bastion', conditional: true, condition: 'EnableDevelopmentResources', enabled: false


end

Convert config value to parameter - In case of inner component having configuration value you wish to expose as runtime parameter, it is possible to do so with limitation that configuration value is only used in resource declarations, as property value. If configuration value is being used to control the dsl flow, taking part in any control structure statements, and such gets evaluated at compile time, there is no sense of making CloudFormation stack parameter out of it.

Below example demonstrate use of ConfigParameter statement on simple S3 Bucket component - it assumes that s3bucket template exists with bucketName as configuration value for it.

CfhighlanderTemplate do

    Component template: 's3bucket', name: 'parameterizedBucket' do
        ConfigParameter config_key: 'bucketName', parameter_name: '', type: 'String'
    end

end

Parameters

Parameters block is used to define CloudFormation template parameters, and metadata on how they are wired with outer or sibling components.

CfhighlanderTemplate do
  Parameters do
    ##
    ##  parameter definitions here
    ##
  end
end

Parameter block supports following parameters

ComponentParam

ComponentParam - Component parameter exposes parameter to be wired from outer component. Cfhighlander's autowiring mechanism will try and find any stack outputs from other components defined by outer components with name matching. If there is no explicit value provided, or autowired from outputs, parameter will be propagated to outer component.

Propagated parameter will be prefixed with component name if it is not defined as global parameter. Otherwise, parameter name is kept in full.

Example below demonstrates 3 different ways of providing parameter values from outer to inner component.


# Inner Component 1
CfhighlanderTemplate do
  Name 's3'
  Parameters do
     ComponentParam 'BucketName','highlander.example.com.au'
     ComponentParam 'BucketName2',''
     ComponentParam 'BucketName3',''
     ComponentParam 'BucketName4','', isGlobal: false # default value is false
     ComponentParam 'BucketName5','', isGlobal: true
  end

end


# Inner Component 2
CfhighlanderTemplate do
  Name 'nameproducer'

  # has output 'bucket name defined in cfdnsl
end


# -- contents of cfndsl
CloudFormation do

    Condition 'AlwaysFalse', FnEquals('true','false')
    S3_Bucket :resourcetovalidateproperly do
      Condition 'AlwaysFalse'
    end

    Output('BucketName') do
        Value('highlanderbucketautowired.example.com.au')
    end
end



# Outer component
CfhighlanderTemplate do
    Component 'nameproducer'
    Component 's3' do
      parameter name: 'BucketName2', value: 'nameproducer.BucketName'
      parameter name: 'BucketName3', value: 'mybucket.example.cfhighlander.org'
    end
end

Example above translates to following wiring of parameters in cfndsl template

CloudFormation do

     # Parameter that was propagated
    Parameter('s3BucketName4') do
      Type 'String'
      Default ''
      NoEcho false
    end

    Parameter('BucketName5') do
      Type 'String'
      Default ''
      NoEcho false
    end

   CloudFormation_Stack('s3') do
       TemplateURL './s3.compiled.yaml'
       Parameters ({

          # Paramater that was auto-wired
           'BucketName' => {"Fn::GetAtt":["nameproducer","Outputs.BucketName"]},

          # Parameter that was explicitly wired as output param from another component
           'BucketName2' => {"Fn::GetAtt":["nameproducer","Outputs.BucketName"]},

          # Paramater that was explicitly provided
           'BucketName3' => 'mybucket.example.cfhighlander.org',

          # Reference to parameter that was propagated. isGlobal: false when defining
          # parameter, so parameter name is prefixed with component name
           'BucketName4' => {"Ref":"s3BucketName4"},

          # Reference to parameter that was propagated. isGlobal: true when defining
          # parameter, so parameter name is not prefixed, but rather propagated as-is
          'BucketName5' => {"Ref":"BucketName5"},

       })
   end
end

Overriding Parameter Properties

Components have pre defined parameters with properties such as Type, AllowedValues, NoEcho etc. These properties can be overridden on the parent component.

CfhighlanderTemplate do
    
    Paramater do
      ComponentParam 'EnvironmentType', 'development', allowedValues: ['development','alpha','production']
    end
    
    Component 'ecs' do
      parameter name: 'EnvironmentType', allowedValues: ['development','alpha','production']
      parameter name: 'Ami', value: '/ssm/path/Ami', type: 'AWS::SSM::Parameter::Value<AWS::EC2::Image::Id>'
    end
    
end

MappingParam

MappingParam - Mapping parameters value is passed as CloudFormation mapping lookup from outer component. This DSL statements takes a full body, as Mapping name, Map key, and value key need to be specified. key, attribute and map methods are used to specify these properties. Mapping parameters involve ruby code execution

# Inner component
CfhighlanderTemplate do
 Name 's3'
 Parameters do
   MappingParam 'BucketName' do
     map 'AccountId'
     attribute 'DnsDomain'
   end
 end
end

DependsOn

DependsOn - this will include any globally exported libraries from given template. E.g.

CfhighlanderTemplate do
 Name 's3'
 DependsOn 'vpc@1.0.3'
end

Will include any cfndsl libraries present and exported in vpc template so extension methods can be consumed within cfndsl template.

Component dependson

If you require dependencies between nest stacks, this can be defined in the component by using the dependson attribute with the value of the depend component names. This will take an array of component names or a string with a single component name. This adds the cloudformation DependsOn property to the stack resource in the master template.

CfhighlanderTemplate do
  Name 'test'
  Component name: 'vpc', template: 'vpc'
  Component name: 'bastion', template: 'bastion'
  Component name: 'ecs', template: 'ecs', dependson: ['vpc','bastion']
end

LambdaFunctions

Cfhighlander supports following in terms of lambda source code management

Configuration and rendering

Lambda functions are defined in cfhighlander templates using LambdaFunctions DSL statement:

CfhighlanderTemplate do
    Name 'my_app'
    LambdaFunctions 'highlanderdocoexample'
end

In example above, lambdas - value passed to LambdaFunctions dsl statement is actually cfhighlander component configuration key, under which lambda functions, and their respective IAM roles are defined. Consider configuration below - all keys are commented with explanation

highlanderdocoexample:

  # custom policies can be referenced in roles
  custom_policies:
    cognito:
      action:
        - cognito-idp:*
      resource: '*'

  # at least one role must be defined
  roles:
    default:
      # using one of the default policies, or custom policies defined above
      # defined at https://github.com/theonestack/cfhighlander/blob/develop/cfndsl_ext/config/managed_policies.yaml
      policies_inline:
        - cloudwatch-logs
        - cognito

      # managed IAM policies are supported as well
      policies_managed:
        - arn:aws:iam::aws:policy/IAMReadOnlyAccess
        - Fn::Sub: 'arn:aws:iam::${AWS::AccountId}:policy/my_app_policy'

  # you can have multiple functions defined, each as key under 'functions'
  functions:
    myapp:

      # link to a role key above defined - mandatory
      role: default

      # code location. Can be file, archive, s3://url or http(s)://url.
      # mandatory configuration option
      code: src/app.py

      # lambda runtime
      runtime: python3.6

      # functions that are not named are having their name auto generated via cloudformation
      # this key defaults to false if not given
      named: true

      # if function is named, either top level key (myapp) will be used, or explicit name
      # this key is optional, and used only if named: is set to true
      function_name:
        Fn::Sub: '${EnvironmentName}-myapp-${EnvironmentVersion}'

      # function timeout (defaults to 30)
      timeout: 30

      # lambda function entrypoint
      handler: app.index

      # command to install any dependencies (optional)
      # if you don't want to get prompted for every command execution use -q (quiet) option
      package_cmd: 'pip3 install -r requirements.txt -t .'

      # creates a log group with cloudformation and sets the retention period in days
      # if not set lambda will create the log group with a unlimited retention
      # note that if lambda has already created a log group, it will need to be deleted
      # before this can be updated.
      log_retention: 30

      # (optional) allowed source. e.g. invocation using SNS
      # for every allowed source, source_arn can be provided optionally
      allowed_sources:
       -
         principal: sns.amazonaws.com
       -
         principal: sns.amazonaws.com
         source_arn: arn:aws:sns:us-east-2:123456789012:my-topic

      # (optional) invoke function on a schedule, with optional payload
      schedules:
       - cronExpression: 'rate(1 minute)'
         payload: '{ "message": "ping" }'

Packaging and publishing

During cfhighlander compilation process, every defined lambda functio goes through process of packaging:

Any archive with *.zip extension will be uploaded to s3 with cfpublish command

Referencing

As all of the lambda functions are rendered as cloudformation resources, they can be referenced in other blocks. E.g. with example above, application component could have following output defined in component's cfndsl file

# myapp.cfndsl.rb
CloudFormation do

    Output('MyAppFunctionName') do
        Value(Ref('myapp'))
    end

end

Publishing Additonal Artifacts

If you need to publish additonal files along with your cloudformation templates you can use the following DSL:

CfhighlanderTemplate do
    Name 'my_app'
    PublishArtifact file: "my-apigateway-spec.yaml"
end

This will upload the file my-apigateway-spec.yaml to the s3 destnation/distribution bucket using the default s3 prefix. If you want to override the s3 key you can use

CfhighlanderTemplate do
    Name 'my_app'
    PublishArtifact file: "my-apigateway-spec.yaml", key: '/my-custom-path/my-custom-file.yaml'
end

Finding templates and creating components

Templates are located by default in following locations

Location of component templates can be given as git/github repo:


CfhighlanderTemplate do

      # pulls directly from master branch of https://github.com/theonestack/hl-component-vpc
      Component name: 'vpc0', template: 'vpc'

      # specify branch github.com: or github: work. You specify branch with hash
      Component name: 'vpc1', template: 'github:theonestack/hl-component-vpc#master'

      # you can use git over ssh
      # Component name: 'vpc2', template: 'git:git@github.com:theonestack/hl-component-vpc.git'

      # use git over https
      Component name: 'vpc3', template: 'git:https://github.com/theonestack/hl-component-sns.git'

      # specify .snapshot to always clone fresh copy
      Component name: 'vpc4', template: 'git:https://github.com/theonestack/hl-component-sns.git#master.snapshot'

      # by default, if not found locally, highlander will search for https://github.com/theonestack/component-$componentname
      # in v${version} branch (or tag for that matter)
      Component name: 'vpc5', template: 'vpc@1.0.4'

end

Render mode for components

Rendering component resources in resulting cloudformation stack is available in 2 modes. These modes are controlled using render keyword of Component DSL statement

Substack - creates additional substack for cfhighlander component and points to it using CloudFormation Stack resource type This is also default render mode - if no render mode is specified Substack will be used

Inline - places all defined resources from inner component in outer component cloudformation template. Resources, Outputs, Conditions, Parameters and Mappings are all inlined - please note that some of the template elements may be renamed in this process in order to assure unique names.

There are some limitations when using inline components - Inlined component parameters, having values as outputs from another component (inlined or not) can't be referenced in component conditions. However, conditions referencing mapping values or parameters passed as mapping values, are allowed.

SIDE EFFECTS Side effect of moving from substack based to fully inlined stack may be revealing some of the implicit dependencies within an environment

Example: Component A defines Hosted Zone, while component B defines Record Set for given hosted zone. Record set is defined by referencing Zone Name (rather than ZoneId), meaning there is no explicit dependency between the resources. When both components are rendered as substack, implicit dependency is created if there is at least one output from component A passed as parameter to component B. Rendering components inlined removes this implicitly defined dependency, as a consequence stack deletion or creation may be halted, as record set is being created/deleted before prior the record set.

WARNING Be aware of resource, condition, parameter, output and mapping limits on a single template when rendering inner components inlined.

EXAMPLE All of the VPC resources will be rendered in outer component template, while bastion will be referenced as substack in example below.

CfhighlanderTemplate do

    Component template:'vpc@1.5.0', name: 'vpc', render: Inline
    Component template:'bastion@1.2.0', name: 'bastion', render: Substack

end

Rendering CloudFormation templates

$ cfhighlander cfcompile [component] [-v distributedversion]

Global Extensions

Any extensions placed within cfndsl_ext folder in core library code are available in cfndsl templates of all components. Any extensions placed within hl_ext in core library code are available in cfhighlander templates of all components.

Environment variables

CFHIGHLANDER_WORKDIR - defaults to $PWD, determines location of 'out' folder where all of the generated files are placed

CFHIGHLANDER_AWS_RETRY_LIMIT - defaults to 10. Number of retries for AWS SDK before giving up. AWS SDK uses exponential backoff to make the API calls

Testing components

Tests are designed for testing different configuration options on components. They can be defined as my_test.test.yaml files in the tests/ directory. Each test file represents a single test configuration which is then compiled and validated against AWS cloudformation api.

Metadata

test metadata needs to defined as bellow with at least a name:. Other key:values are for documentation.

test_metadata:
  type: config
  name: queues with config overrides
  description: Create 2 queues with name and override available config

Test Paramaters

If you want to test a component with a parameter input you can specify the test-parameters: key with key:value pairs of parameters

# Define the test parameter
test_parameters:
  SecurityGroupId: sg-123456789

# Test configuration
security_group_rules:
  -
    from: 22
    protocol: tcp
    security_group_id:
      # use the parameter within our test
      Ref: SecurityGroupId
    desc: ssh access from another security group

Running Test

$ cfhighlander cftest [component] [options]

Usage:
  cfhighlander cftest component[@version] -f, --format=FORMAT

Options:
  -d, [--directory=DIRECTORY]        # Tests directory
                                     # Default: tests
  -t, [--tests=one two three]        # Point to specific test files using the relative path
      [--dstbucket=DSTBUCKET]        # Distribution S3 bucket
      [--dstprefix=DSTPREFIX]        # Distribution S3 prefix
  -f, --format=FORMAT                # CloudFormation templates output format
                                     # Default: yaml
                                     # Possible values: yaml, json
      [--validate], [--no-validate]  # Optionally validate template
                                     # Default: true
  -q, [--quiet], [--no-quiet]        # Silently agree on user prompts (e.g. Package lambda command)
                                     # Default: true
  -r, [--report=REPORT]              # report output format in reports directory
                                     # Possible values: json, xml

Test Highlander component with test case config

Reports

By default test will print the output to stdout. You can output to a file with a format of xml or json using the -r option