Awesome

UefiVarMonitor

The sample runtime DXE driver (UEFI driver) monitoring access to the UEFI variables by hooking the runtime service table in C and Rust.

This project was developed to provide a small sample of a runtime driver.

Rust implementation was made solely for author's learning.

Projects Overview

• UefiVarMonitorDxe

  The UEFI runtime driver that hooks GetVariable and SetVariable runtime services, and logs the use of them into serial output. Written in less than 300 lines of C code.

• uefi-var-monitor

  Nearly equivalent implementation of UefiVarMonitorDxe in Rust. Unsafe, unsafe everywhere.

• UefiVarMonitorExDxe

  The enhanced version of UefiVarMonitorDxe allowing a Windows driver to register an inline callback of the above runtime services. This can also be used to alter parameters and block those calls.

• UefiVarMonitorExClient

  The sample Windows driver registering a callback with UefiVarMonitorExDxe.

Building

• UefiVarMonitorDxe and UefiVarMonitorExDxe

  1. Set up edk2 build environment
  2. Copy UefiVarMonitorPkg as edk2\UefiVarMonitorPkg
  3. On the edk2 build command prompt, run the below command:

     > edksetup.bat
     > build -t VS2019 -a X64 -b NOOPT -p UefiVarMonitorPkg\UefiVarMonitorPkg.dsc -D DEBUG_ON_SERIAL_PORT
     

     Or on Linux or WSL,

     $ . edksetup.sh
     $ build -t GCC5 -a X64 -b NOOPT -p UefiVarMonitorPkg/UefiVarMonitorPkg.dsc -D DEBUG_ON_SERIAL_PORT
     

• uefi-var-monitor

  1. Install the nightly rust compiler. Below is an example on Linux, but it is largely the same on Windows.

     $ sudo snap install rustup --classic
     $ rustup default nightly
     $ rustup component add rust-src
     

  2. Build the project.

     $ cd uefi-var-monitor
     $ cargo build
     

• UefiVarMonitorExClient

  This is a standard Windows driver. VS2019 and WDK 10.0.18362 or later are required.

Credits

• Thank you @x1tan for modernalized xcargo-less build.