Awesome

demuxlet

Genetic multiplexing of barcoded single cell RNA-seq

Citation

Demuxlet has been published: https://www.nature.com/articles/nbt.4042

If you find it useful, please cite: Kang et al., Nature Biotechnology 2017.

Tips for running

Set --alpha 0 --alpha 0.5, which assumes the expected proportion of 50% genetic mixture from two individuals, to get better estimates of doublets.
Set --group-list to a list of barcodes (i.e. barcodes.tsv from 10X) to speed things up and only get demultiplexing for cells called by other methods
To reproduce the results presented in Figure 2 of the demuxlet paper, please go to: https://github.com/yelabucsf/demuxlet_paper_code/tree/master/fig2 to download the vcf and the outputs of demuxlet.

Introduction

demuxlet is a software tool to deconvolute sample identity and identify multiplets when multiple samples are pooled by barcoded single cell sequencing. demuxlet takes (1) a SAM/BAM/CRAM file produced by the standard 10x sequencing platform, or any other barcoded single cell RNA-seq (with proper --tag-UMI and --tag-group) options (2) a VCF/BCF file containing the genotype (GT), posterior probability (GP), or genotype likelihood (GL) to assign each barcode to a specific sample (or a pair of samples) in the VCF file.

Installing demuxlet

Before installing demuxlet, you need to install htslib in the same directory you want to install demuxlet (i.e. demuxlet and htslib should be siblings).
NOTE htslib 1.11 is not supported for now - use earlier releases (e.g. 1.10.x)

After installing htslib, you can clone the current snapshot of this repository to install as well

<pre> $ git clone https://github.com/statgen/demuxlet.git $ cd demuxlet $ autoreconf -vfi $ ./configure (with additional options such as --prefix) $ make $ make install (may require root privilege) </pre>

Using demuxlet

demuxlet uses a self-documentation utility. You can run each utility with -man or -help option to see the command line usages.

<pre> $ ./demuxlet (for short usage) $ ./demuxlet -help (for detailed usage) </pre>

The detailed usage is also pasted below.

<pre> Options for input SAM/BAM/CRAM --sam [STR: ] : Input SAM/BAM/CRAM file. Must be sorted by coordinates and indexed --tag-group [STR: CB] : Tag representing readgroup or cell barcodes, in the case to partition the BAM file into multiple groups. For 10x genomics, use CB --tag-UMI [STR: UB] : Tag representing UMIs. For 10x genomiucs, use UB Options for input VCF/BCF --vcf [STR: ] : Input VCF/BCF file, containing the individual genotypes (GT), posterior probability (GP), or genotype likelihood (PL) --field [STR: GP] : FORMAT field to extract the genotype, likelihood, or posterior from --geno-error [FLT: 0.01] : Genotype error rate (must be used with --field GT) --min-mac [INT: 1] : Minimum minor allele frequency --min-callrate [FLT: 0.50] : Minimum call rate --sm [V_STR: ] : List of sample IDs to compare to (default: use all) --sm-list [STR: ] : File containing the list of sample IDs to compare Output Options --out [STR: ] : Output file prefix --alpha [V_FLT: ] : Grid of alpha to search for (default is 0.1, 0.2, 0.3, 0.4, 0.5) --write-pair [FLG: OFF] : Writing the (HUGE) pair file --doublet-prior [FLT: 0.50] : Prior of doublet --sam-verbose [INT: 1000000] : Verbose message frequency for SAM/BAM/CRAM --vcf-verbose [INT: 10000] : Verbose message frequency for VCF/BCF Read filtering Options --cap-BQ [INT: 40] : Maximum base quality (higher BQ will be capped) --min-BQ [INT: 13] : Minimum base quality to consider (lower BQ will be skipped) --min-MQ [INT: 20] : Minimum mapping quality to consider (lower MQ will be ignored) --min-TD [INT: 0] : Minimum distance to the tail (lower will be ignored) --excl-flag [INT: 3844] : SAM/BAM FLAGs to be excluded Cell/droplet filtering options --group-list [STR: ] : List of tag readgroup/cell barcode to consider in this run. All other barcodes will be ignored. This is useful for parallelized run --min-total [INT: 0] : Minimum number of total reads for a droplet/cell to be considered --min-uniq [INT: 0] : Minimum number of unique reads (determined by UMI/SNP pair) for a droplet/cell to be considered --min-snp [INT: 0] : Minimum number of SNPs with coverage for a droplet/cell to be considered </pre>

Interpretation of output files

demuxlet generates multiple output file, such as [prefix].best, [prefix].sing, [prefix].sing2, and optionally [prefix].pair (with --write-pair argument). Each file contains the following information

The [prefix].best file contains the best guess of the sample identity, with detailed statistics to reach to the best guess
The [prefix].sing file contains the statistics for matching each cell with each possible sample.
The [prefix].sing2 file contains the statistics similar information to the previous one, but generated for sanity checking of the [prefix].pair results.
The [prefix].pair file contains the statistics for matching each cell with each possible configuration of doublet.

The [prefix].best file contains the following 22 columns.

BARCODE - Cell barcode for the cell that is being assigned in this row
RD.TOTL - The total number of reads overlapping with variant sites for each droplet.
RD.PASS - The total number of reads that passed the quality threshold, such as mapping quality, base quality.
RD.UNIQ - The total number of UMIs that passed the quality threshold. If a UMI is observed in a single variant multiple times, it won't be counted more. If a UMI is observed across multiple variants, it will be counted as different.
N.SNP - The total number of variants overlapping with any read in the droplet.
BEST - The best assignment for sample ID.
- For singlets, SNG-<sample ID>
- For doublets, DBL-<sample ID1>-<sampleID2>-<mixture rate>
- For ambiguous droplets, , AMB-<best-singlet-sampleID>-<next-best-singlet-sampleID>-<doublet ID1/ID2>)
SNG.1ST - The best singlet assignment for sample ID
SNG.LLK1 - The log(likelihood that the ID from SNG.1ST is the correct assignment)
SNG.2ND - The next best singlet assignment for sample ID
SNG.LLK2 - The log(likelihood that the ID from SNG.2ND is the correct assignment)
SNG.LLK0 - The log-likelihood from allele frequencies only
DBL.1ST - The sample ID that is most likely included if the assignment is a doublet
DBL.2ND - The sample ID that is next most likely included ifthe assignment is a doublet
ALPHA - % Mixture Proportion
LLK12 - The log(likelihood that the ID is a doublet)
LLK1 - The log(likelihood that the ID from DBL.1ST is the correct singlet assignment)
LLK2 - The log(likelihood that the ID from DBL.2ND is the correct singlet assignment)
LLK10 - The log(likelihood that the ID from DBL.1ST is one of the doublet, and the other doublet identity is calculated from allele frequencies only)
LLK20 - The log(likelihood that the ID from DBL.2ND is one of the doublet, and the other doublet identity is calculated from allele frequencies only)
LLK00 - The log(likelihood that the droplet is doublet, but both identities are calculated from allele frequencies only)
PRB.DBL - Posterior probability of the doublet assignment
PRB.SNG1 - Posterior probability of the singlet assignment when excluding all possible doublets