Awesome

ESP32 BLE Abs Mouse library

This library allows you to make the ESP32 act as a Bluetooth Absolute Mouse and control what it does. E.g. click, move, release and etc.

Features

Installation

(Make sure you can use the ESP32 with the Arduino IDE. Instructions can be found here.)
Download the latest release of this library from the release page.
In the Arduino IDE go to "Sketch" -> "Include Library" -> "Add .ZIP Library..." and select the file you just downloaded.
You can now go to "File" -> "Examples" -> "ESP32 BLE Abs Mouse" and select any of the examples to get started.

Examples

#include <BleAbsMouse.h>

BleAbsMouse bleAbsMouse;

void setup() {
  bleAbsMouse.begin();
}

void loop() {
  if(bleAbsMouse.isConnected()) {
    bleAbsMouse.click(5000, 5000);
  }
  delay(2000);
}

Check examples for concrete examples.

API docs

// Use 0 up to 10000 to represent:
//   x: from left to right
//   y: from top to bottom
bleAbsMouse.click(x,y);

// If you want to click and stay clicked, use move instead:
bleAbsMouse.move(x,y);

// Since move keeps the finger as pressed, you need to release it when convenient
bleAbsMouse.release();

There is also Bluetooth specific information that you can use (optional):

Instead of BleAbsMouse bleAbsMouse; you can do BleAbsMouse bleAbsMouse("Bluetooth Device Name", "Bluetooth Device Manufacturer", 100);.

The third parameter is the initial battery level of your device. To adjust the battery level later on you can simply call e.g. bleAbsMouse.setBatteryLevel(50) (set battery level to 50%). By default the battery level will be set to 100%, the device name will be ESP32 Bluetooth Abs Mouse and the manufacturer will be Espressif.

Credits

Credits to T-vK as this library is based on ESP32-Ble-Mouse that he created.