Home

Awesome

sniffmypacketsv2

Next major release of sniffMyPackets - Now with added packet loving

####NOTE: You can now choose to use a database backend or not. This is defined in the sniffmypacketsv2.conf file which will be created when you run the canari create-profile command listed below.

Once you have the sniffmypacketsv2.conf file, open it in a text editor and change the usedb value from 0 to 1.:

https://github.com/SneakersInc/sniffmypacketsv2-web

These instructions are to install sniffMyPacketsv2 onto your machine. In order for the transforms to work you need to have the following 2 components installed:

  1. Maltego

  2. Canari Framework

Installation Instructions:

Maltego

Download Maltego from their website or if you are using BackTrack/Kali its installed by default.

Run Maltego so it creates the required folders and directory structure
Go through the default configuration for the first run (that wizard thing)
Close Maltego

Canari Framework

The recommended method is to get Canari from the github repo here:

Canari Framework - https://github.com/allfro/canari

From the directory you wish to have Canari installed run the following commands:

git clone https://github.com/allfro/canari.git  
cd canari  
python setup.py install

This will install Canari and download the required dependencies.

Once installed you can test by running:

canari version You should see something like this:

Your running Canari Framework v1.1

You are now ready to install sniffMyPacketsv2...

From your working directory clone the github repo using:

git clone https://github.com/SneakersInc/sniffmypacketsv2.git  
cd sniffmypacketsv2

You now need to install the Python modules required. You can do this one of two ways:

1. sudo pip install -r requirements.txt  
2. sudo python setup.py install  

cd src  
canari create-profile sniffmypacketsv2 -w [working directory]

so in my case:

-w /root/localTransforms/sniffmypacketsv2/src

This will create a sniffmypacketsv2.mtz file (and sniffmypackets.conf)

Open Maltego, click on the Maltego Icon in the toolbar, then Import - Import Configuration

Follow the wizard to install the transforms, entities and machine into Maltego

All the sniffmypacketsv2 transforms and entities are under the [SmP] headings