Home

Awesome

Disclaimer

This project is in no way related to or created by the official Manjaro team or its members. It is solely a project of mine. Do not go around spamming the Manjaro forum if you come across any issues. You certainely won't receive any help. Mention your issues here and I'll try to find a solution.

ManjaroWSL2

Manjaro on WSL2 (Windows 10 FCU or later) based on wsldl.

Screenshot-2022-11-17-155106.png Github All Releases GitHub release (latest by date) PRs Welcome License

Features and important information

ManjaroWSL2 may not properly load the Intel WSL driver by default which makes it impossible to use the D3D12 driver on Intel graphics cards. This is because the Intel WSL driver files link against libraries that do not exist on Manjaro. You can manually fix this issue using ldd to see which libraries they are linked, eg: ldd /usr/lib/wsl/drivers/iigd_dch_d.inf_amd64_49b17bc90a910771/*.so, and then try installing the libraries marked not found from the Manjaro package repository. If the corresponding library file is not found in the package repository, it may be that the version suffix of the library file is different, such as libedit.so.0.0.68 and libedit.so.2. In such a case, you can try to create a symlink.

ManjaroWSL2 has the following features during the installation stage.

Requirements

How to install

Note: Exe filename is using the instance name to register. If you rename it you can register with a diffrent name and have multiple installs.

How to setup

ManjaroWSL2 will ask you to create a new user during its first run. If you choose to create a new user during the first run, the steps below are not required unless you want to create additional users.

Open Manjaro.exe and run the following commands.

passwd
useradd -m -g users -G wheel -s /bin/bash <username>
echo "%wheel ALL=(ALL) ALL" >/etc/sudoers.d/wheel
passwd <username>
exit

You can set the user you created as default user using 2 methods.

Open Manjaro.exe, run the following command (replace username with the actual username you created).

sed -i '/\[user\]/a default = username' /etc/wsl.conf

Shutdown and restart the distro (this step is important).

(or)

Execute the command below in a windows cmd terminal from the directory where Manjaro.exe is installed.

>Manjaro.exe config --default-user <username>

Set up pacman mirrors before you proceed using ManjaroWSL2. Pacman is configured to use the Global mirror by default. Switch to the mirror/mirrors of your choice or reset to use all mirrors before you update. More information on how to use pacman-mirrors is available here.

$sudo pacman-mirrors --country <name>
$sudo pacman -Syu

How to use installed instance

exe usage

Usage :
    <no args>
      - Open a new shell with your default settings.

    run <command line>
      - Run the given command line in that instance. Inherit current directory.

    runp <command line (includes windows path)>
      - Run the given command line in that instance after converting its path.

    config [setting [value]]
      - `--default-user <user>`: Set the default user of this instance to <user>.
      - `--default-uid <uid>`: Set the default user uid of this instance to <uid>.
      - `--append-path <true|false>`: Switch of Append Windows PATH to $PATH
      - `--mount-drive <true|false>`: Switch of Mount drives
      - `--default-term <default|wt|flute>`: Set default type of terminal window.

    get [setting]
      - `--default-uid`: Get the default user uid in this instance.
      - `--append-path`: Get true/false status of Append Windows PATH to $PATH.
      - `--mount-drive`: Get true/false status of Mount drives.
      - `--wsl-version`: Get the version os the WSL (1/2) of this instance.
      - `--default-term`: Get Default Terminal type of this instance launcher.
      - `--lxguid`: Get WSL GUID key for this instance.

    backup [contents]
      - `--tar`: Output backup.tar to the current directory.
      - `--reg`: Output settings registry file to the current directory.
	  - `--tgz`: Output backup.tar.gz to the current directory.
      - `--vhdx`: Output backup.ext4.vhdx to the current directory.
      - `--vhdxgz`: Output backup.ext4.vhdx.gz to the current directory.

    clean
      - Uninstall that instance.

    help
      - Print this usage message.

Run exe

>{InstanceName}.exe
[root@PC-NAME user]#

Run with command line

>{InstanceName}.exe run uname -r
4.4.0-43-Microsoft

Run with command line using path translation

>{InstanceName}.exe runp echo C:\Windows\System32\cmd.exe
/mnt/c/Windows/System32/cmd.exe

Change default user(id command required)

>{InstanceName}.exe config --default-user user

>{InstanceName}.exe
[user@PC-NAME dir]$

Set "Windows Terminal" as default terminal

>{InstanceName}.exe config --default-term wt

How to update

Updating Manjaro doesn't require you to download and install a newer release everytime. Usually all it takes is to run the command below to update the instance.

$sudo pacman -Syu

Sometimes updates may fail to install. You can try the command below in such a situation.

$sudo pacman -Syyuu

You may need to install a newer release if additional features have been added/removed from the installer.

How to uninstall instance

>Manjaro.exe clean

How to backup instance

export to backup.tar.gz

>Manjaro.exe backup --tgz

export to backup.ext4.vhdx.gz

>Manjaro.exe backup --vhdxgz

How to restore instance

There are 2 ways to do it.

Rename the backup to rootfs.tar.gz and run Manjaro.exe

(or)

.tar(.gz)

>Manjaro.exe install backup.tar.gz

.ext4.vhdx(.gz)

>Manjaro.exe install backup.ext4.vhdx.gz

You may need to run the command below in some circumstances.

>Manjaro.exe --default-uid 1000

How to build from source

prerequisites

Docker, tar, zip, unzip, bsdtar need to be installed.

git clone git@gitlab.com:sileshn/ManjaroWSL2.git
cd ManjaroWSL2
make

Copy the Manjaro.zip file to a safe location and run the command below to clean.

make clean

How to run docker in ManjaroWSL2 without using docker desktop

Install docker.

sudo pacman -S docker

Follow this blog post for further details on how to setup. Alternatively, if using systemd, use the commands below to setup and reboot.

sudo systemctl start docker.service
sudo systemctl enable docker.service
sudo usermod -aG docker $USER

Screenshot-2022-11-17-155326.png

How to setup a desktop environment

You need to follow the official instructions to setup desktop environment.

Take Plasma 5 as an example, first install the desktop environment:

sudo pacman -S plasma kio-extras
sudo systemctl enable sddm.service --force

Second, you need to install the xorg and xrdp.

pacman -S xorg xorg-server xrdp

xorgxrdp is in AUR so you can install it with yay or pamac.

yay -S xorgxrdp

Then you need to enable and start xrdp service.

sudo systemctl enable xrdp.service
sudo systemctl start xrdp.service
sudo systemctl reboot

You will need to add below code to your ~/.xinitrc file. Create the file if it doesn't exist.

#!/bin/sh
/usr/lib/plasma-dbus-run-session-if-needed startplasma-x11

Finally, execute ip addr | grep eth0 to get the IP address. You should be able to press Win+R and run mstsc to connect to your RDP server with the ip:3389 as target input. Remember to select the xvnc option to log in, you should be able to see the desktop after it.

Refer to the following links for more information.

https://www.reddit.com/r/ManjaroLinux/comments/iu1mxb/manjaro_running_on_wsl_2_windows_subsystem_for/ https://wiki.archlinux.org/title/xrdp#Black_screen_with_a_desktop_environment

299938465-44a7d727-5383-40e9-bc86-6f5f6bd92043.png