Home

Awesome

Floating Action Button Library for Android

Build Status Maven Central Android Arsenal

Description

This Library contains implementation of the Floating Action Button for Android.

Floating action buttons are used for a special type of promoted action. They are distinguished by a circled icon floating above the UI and have special motion behaviors related to morphing, launching, and the transferring anchor point.

Requirements

The Library requires Android SDK version 9 (Gingerbread) and higher.

Gradle Dependency

dependencies {
	compile 'com.scalified:fab:1.1.3'
}

Action Button has a dependency on an external ViewMover library, which in turn has a transitive dependency on the UI Tools library. If any of these libraries are already used in the project they must be excluded as transitive dependencies

Activity Stream

Full ChangeLog

1.1.3 - current

  1. Fixed issue #28: move() method smearing on KitKat with snackbar:
    • A fix was made within the dependent ViewMover library. Only ActionButton dependency on ViewMover library was updated
  2. Changed the standard Android logging API to SLF4J Logging API

1.1.1 - previous

  1. Fixed issue #27: Icon is outside the circle:

    A call to Canvas.restore() without calling the Canvas.save() first resulted in the unpredictable behaviour. Added call to Canvas.save() before Canvas.restore() in the RippleEffectDrawer class

Features in the next versions:

Demo

Subscribe the ActionButton YouTube Channel

Button types

Floating action buttons come in 3 sizes:

DEFAULTMINIBIG
DefaultMiniBig

Color palette

The Library contains all of the colors 500 and 900 of the Material Color Palette.

Colors 500 are used for the NORMAL button state while 900 ones for the PRESSED state:

Green 500Amber 500Blue 500
Green 500Amber ColorBlue Grey

Shadow

Shadow enabled by default and has standard settings according to Material Design Guidelines. These settings are suitable in most cases. However, shadow can be modified in three ways: radius, X- or Y-axis offset and color.

DefaultRadiusX- and Y- axis offset
Default ShadowShadow RadiusShadow Offset

Stroke

Stroke is disabled by default. Stroke can be modified in two ways: width and color.

ThinMediumThick
Thin StrokeMedium StrokeThick Stroke

Effects

Shadow Responsive Effect

Shadow Responsive Effect means that shadow is changed in response to the user input. Shadow Responsive Effect enabled by default.

Ripple Effect

A touch Ripple Effect indicates where and when a touch occurs within the ActionButton and acknowledges that the touch input was received. Ripple Effect disabled by default.

Shadow Responsive EffectRipple Effect
Shadow Responsive EffectRipple Effect

Moving

ActionButton can be moved in any direction. ViewMover Library is used for performing the ActionButton moving

Left-Right MoveUp-Down Move
Left-Right MoveUp-Down Move

Animations

The Library has several predefined animations:

Fade In - Fade OutRoll From Down - Roll To DownJump From Down - Jump To Down
Fade In Fade OutRoll From Down Roll To DownJump From Down - Jump To Down
Scale In - Scale OutRoll From Right - Roll To RightJump From Right - Jump To Right
Scale In Scale OutRoll From Right Roll To RightJump From Right Jump To Right

Usage

Creation

Declaration inside XML resource

ActionButton button can be declared in the XML resource. For instance, using RelativeLayout:

<RelativeLayout 
        xmlns:android="http://schemas.android.com/apk/res/android"
        xmlns:fab="http://schemas.android.com/apk/res-auto"
        android:layout_width="match_parent"
        android:layout_height="match_parent"
        >
        <com.scalified.fab.ActionButton 
            android:id="@+id/action_button"
            android:layout_width="wrap_content"
            android:layout_height="wrap_content"
            android:layout_alignParentBottom="true" 
            android:layout_alignParentRight="true"
            android:layout_marginRight="@dimen/fab_margin"
            android:layout_marginBottom="@dimen/fab_margin"
            />
</RelativeLayout>
// And then find it within the content view:
ActionButton actionButton = (ActionButton) findViewById(R.id.action_button);

There are no required configuration parameters for it. All of the configuration parameters are optional.

Programmatically

Context context = getContext();
ActionButton actionButton = new ActionButton(context);
// And then add it to the content view

Button actions

Showing and Hiding

Action Button can be shown, hidden or completely dismissed:

actionButton.show();    // shows the button if it is hidden and plays the show animation if set
actionButton.hide();    // hides the button if it is shown and plays the hide animation if set
actionButton.dismiss(); // completely dismisses the button and plays the hide animation if set

After dismissal the button is completely removed from its parent view, so any calls to show() etc. won't be processed.

The current status of the button can be checked with the help of:

// To check whether button is shown (inherited from android.view.View class):
boolean shown = actionButton.isShown();

// To check whether button is hidden:
boolean hidden = actionButton.isHidden();

// To check whether button is dismissed:
boolean dismissed = actionButton.isDismissed();

Playing animations

There are some cases when you need to force playing the animation without calling the show(), hide() or dismiss() methods. For instance, when your button appears within layout in the Activity for the first time. In such cases animations can be played apart from showing, hiding, or dismissing the button:

actionButton.playShowAnimation();   // plays the show animation
actionButton.playHideAnimation();   // plays the hide animation

Animations are played only if set. By default animations are not set.

The best way to play the animation with the Activity launching is to override the onWindowFocusChanged(boolean) and call either playShowAnimation() or playHideAnimation() within it

Moving ActionButton

ActionButton can be moved within its parent container. While moving, translate animation is used. There are methods for moving ActionButton in 4 standard directions:

// Initialize the moving distance
int distance = 100.0f // in density-independent pixels

// Move ActionButton left
actionButton.moveLeft(distance);

// Move ActionButton up
actionButton.moveUp(distance);

// Move ActionButton right
actionButton.moveRight(distance);

// Move ActionButton down
actionButton.moveDown(distance);

The above methods will cover the most cases, however movement can also be customized in more advanced way:

// Initialize the moving parameters
int xAxisDelta = 100.0f // in density-independent pixels
int yAxisDelta = 100.0f // in density-independent pixels
long animationDuration = 500L
Interpolator animationInterpolator = new AccelerateInterpolator();

// Create the moving parameters instance
MovingParams params = new MovingParams(getContext(), xAxisDelta, yAxisDelta, animationDuration, animationInterpolator);

// Move the ActionButton
actionButton.move(params);

ViewMover Library is used for performing the ActionButton moving.

For API lower than Jelly Bean (version code 16) moving is guaranteed to work as expected with FrameLayout and RelativeLayout. Working as expected with other layouts not guaranteed

Customization

Button types

There are three types of Action Button, which you can work with:

By default the button type is set to DEFAULT.

To work with button types use:

// To set the button type:
actionButton.setType(ActionButton.Type.MINI);

// To get the button type:
ActionButton.Type type = actionButton.getType();

Button size

To work with ActionButton size use:

// To get the ActionButton size
float size = actionButton.getSize();

// To set the ActionButton size
actionButton.setSize(60.0f); // in density-independent pixels

Changing the default size of the button breaks the rules of Material Design

Setting the button size explicitly means, that button types with its default sizes are completely ignored. Do not use this method, unless you know what you are doing

Button states

There are two button states, which Action Button may reside in:

To work with button states use:

// To set the button state:
actionButton.setState(ActionButton.State.PRESSED);

// To get the button state:
ActionButton.State state = actionButton.getState();

Button colors

Button colors can be set as for the NORMAL state, so for the PRESSED one. By default the following colors are set:

To work with button colors use:

// To set button color for normal state:
actionButton.setButtonColor(getResources().getColor(R.color.fab_material_lime_500));

// To get button color for normal state:
int buttonColor = actionButton.getButtonColor();

// To set button color for pressed state:
actionButton.setButtonColorPressed(getResources().getColor(R.color.fab_material_lime_900));

// To get button color for pressed state:
int buttonColorPressed = actionButton.getButtonColorPressed();

Shadow

Shadow can be customized in three ways: color, radius and offset. By default shadow enabled and has the following default values:

To work with shadow use:

// To check whether shadow is present:
boolean hasShadow = actionButton.hasShadow();

// To set the shadow color:
actionButton.setShadowColor(getResources().getColor(R.color.fab_material_grey_500));

// To get the shadow color:
int shadowColor = actionButton.getShadowColor();

// To set the shadow radius:
actionButton.setShadowRadius(5.0f);

// To get the shadow radius:
float shadowRadius = actionButton.getShadowRadius();

// To set the shadow X-axis offset:
actionButton.setShadowXOffset(3.5f);

// To get the shadow X-axis offset:
float shadowXOffset = actionButton.getShadowXOffset();

// To set the shadow Y-axis offset:
actionButton.setShadowYOffset(3.0f);

// To get the shadow Y-axis offset:
float shadowYOffset = actionButton.getShadowYOffset();

// To remove shadow:
actionButton.removeShadow();

Shadow radius and offset must be specified in density-independent pixels.

For API 21 Lollipop and higher elevation can be enabled. In this case the default shadow becomes disabled and configuration of any of its parameters will be ignored.

Image

Action Button can have an image centered inside. By default the image absent. Any image can be used for adding. The Library has fab_plus_icon drawable, which can also be used. When an image is set its width and height are changed to the default values, which both are set to 24.0dp (according to material design guidelines). However this size is also adjustable.

To work with image use:

// To check whether image is present:
boolean hasImage = actionButton.hasImage();

// To set an image (either bitmap, drawable or resource id):
actionButton.setImageBitmap(bitmap);
actionButton.setImageDrawable(getResource.getDrawable(R.drawable.fab_plus_icon));
actionButton.setImageResource(R.drawable.fab_plus_icon);

// To get an image:
Drawable image = actionButton.getImage();

// To set the image size (which is by default 24.0dp):
actionButton.setImageSize(30.0dp);

// To get the image size:
float imageSize = actionButton.getImageSize();

// To remove the image:
actionButton.removeImage();

Image size must be specified in density-independent pixels.

Changing the image size breaks the rules of Material Design

Stroke

Stroke can be customized in two ways: width and the color. Stroke disabled by default, however it has the default values:

To work with stroke use:

// To check whether stroke enabled:
boolean hasStroke = actionButton.hasStroke();

// To set stroke color:
actionButton.setStrokeColor(getResources().getColor(R.color.fab_material_blue_grey_500));

// To get stroke color:
int strokeColor = actionButton.getStrokeColor();

// To set stroke width:
actionButton.setStrokeWidth(1.5f);

// To get stroke width:
float strokeWidth = actionButton.getStrokeWidth();

// To remove the stroke:
actionButton.removeStroke();

Stroke width must be specified in density-independent pixels

Effects

Shadow Responsive Effect

Shadow Responsive Effect means that shadow is changed in response to the user input. When user clicks the button and holds it, shadow radius increased to a certain value. Then, when user releases the button, shadow radius decreased to its initial value. Shadow Responsive Effect enabled by default.

To work with the Shadow Responsive Effect use:

// To check whether Shadow Responsive Effect enabled:
boolean shadowResponsiveEffectEnabled = actionButton.isShadowResponsiveEffectEnabled();

//To enable or disable Shadow Responsive Effect:
actionButton.setShadowResponsiveEffectEnabled(true);
actionButton.setShadowResponsiveEffectEnabled(false);

For API 21 Lollipop and higher elevation can be enabled. Shadow Responsive Effect won't be available in this case.

Shadow maximum radius value is calculated by multiplying the shadow initial radius and shadow response factor, which is by default 1.75f. Shadow response factor can't be changed.

Note, that having Shadow Responsive Effect enabled leads to increasing of the ActionButton general view size. In this case view size calculated based on the maximum value of the shadow radius. This means, that even if there is a place near the ActionButton unfilled, it is actually used by Shadow Responsive Effect

Ripple Effect

A touch Ripple Effect indicates where and when a touch occurs within the ActionButton and acknowledges that the touch input was received. Ripple Effect disabled by default. Ripple Effect color by default is a darken variant (20% darker) of the color for the PRESSED state

To work with Ripple Effect use:

// To check whether Ripple Effect enabled:
boolean rippleEffectEnabled = actionButton.isRippleEffectEnabled();

// To enable or disable Ripple Effect:
actionButton.setRippleEffectEnabled(true);
actionButton.setRippleEffectEnabled(false);

// To set button color ripple:
actionButton.setButtonColorRipple(getResources().getColor(R.color.fab_material_grey_900));

// To get button color ripple:
int buttonColorRipple = actionButton.getButtonColorRipple();

Animations

Action Button supports 2 animation types: animation, which is played while showing the button and animation, which is played while hiding the button. By default neither show animation, nor hide animation are set.

To work with animations use:

// To set show animation:
actionButton.setShowAnimation(getResources().getAnimation(R.anim.fab_fade_in));
actionButton.setShowAnimation(ActionButton.Animations.FADE_IN);

// To get show animation:
Animation animation = actionButton.getShowAnimation();

// To remove show animation:
actionButton.removeShowAnimation();

// To set hide animation:
actionButton.setHideAnimation(getResources().getAnimation(R.anim.fab_fade_out));
actionButton.setHideAnimation(ActionButton.Animations.FADE_OUT);

// To get hide animation:
Animation animation = actionButton.getHideAnimation();

// To remove hide animation:
actionButton.removeHideAnimation();

XML full configuration example

Firstly add the namespace:

xmlns:fab="http://schemas.android.com/apk/res-auto"

Then refer the added namespace to configure Action Button parameters

<com.scalified.fab.ActionButton 
            android:id="@+id/action_button"
            android:layout_width="wrap_content"
            android:layout_height="wrap_content"
            android:layout_marginRight="@dimen/fab_margin"
            android:layout_marginBottom="@dimen/fab_margin"
            fab:type="DEFAULT"
            fab:button_color="@color/fab_material_lime_500"
            fab:button_colorPressed="@color/fab_material_lime_900"
            fab:image="@drawable/fab_plus_icon"
            fab:image_size="24dp"
            fab:shadow_color="#757575"
            fab:shadow_radius="1.0dp"
            fab:shadow_xOffset="0.5dp"
            fab:shadow_yOffset="1.0dp"
            fab:stroke_color="@color/fab_material_blue_grey_500"
            fab:stroke_width="1.0dp"
            fab:button_colorRipple="@color/fab_material_black"
            fab:rippleEffect_enabled="false"
            fab:shadowResponsiveEffect_enabled="true"
            fab:show_animation="@anim/fab_roll_from_down"
            fab:hide_animation="@anim/fab_roll_to_down"
            />

The above example contains all of the configuration parameters for Action Button, so there is no need to configure all of them, because they all have default values

Logging

To enable logging:

  1. Add the following dependency:

    dependencies {
    	compile 'com.github.tony19:logback-android-classic:1.1.1-3'
    }
    
  2. Create the logback.xml file in the src/main/assets with the sample configuration:

    <?xml version="1.0" encoding="UTF-8"?>
    <configuration>
    	<appender name="LOGCAT" class="ch.qos.logback.classic.android.LogcatAppender">
    		<tagEncoder>
    			<pattern>%logger{0}</pattern>
    		</tagEncoder>
    		<encoder>
    			<pattern>%d{HH:mm:ss.SSS} [%thread] [%logger{0}] - %msg%n</pattern>
    		</encoder>
    	</appender>
    
    	<root level="TRACE" additivity="false">
    		<appender-ref ref="LOGCAT" />
    	</root>
    </configuration>
    

    You may wish to configure different appenders with different log levels for packages, classes etc.

    More information about LOGBack can be found @ LOGBack Project Site

  3. Add the following InvalidPackage ignore rule into lint.xml file (located @ the root of the project):

    <issue id="InvalidPackage" >
    	<ignore path="**/logback-android-core/*" />
    </issue>
    

Applications that use ActionButton Library

If You would like your application to be added to this list please <a href="mailto:info@scalified.com?subject=[ActionButton]: Add my application to the list">write me</a> or create the pull request

IconApplication
<img src="https://lh3.googleusercontent.com/tyDkY3GmUrMX4nIUA5xtlTd3CHpxRLn-VVpRg26ZmqX-RTURwmyXwp36Nl2woPYZilI=w42" alt="Code Buddy Image"/>CodeBuddy
<img src="https://lh3.ggpht.com/Vn9sIUPcCVihrxMATWR_MjCIFuc5quCw-R3UN8Rmoze7rgaBhHdmF2RqjX3x28EJoQ=w42" alt="Temperature Metric Converter Image"/>Temperature Metric Converter

License

  Copyright 2016 Scalified <http://www.scalified.com>

  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at

      http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.

Scalified Links