Home

Awesome

TaskIt

Tests

Anything that can go wrong, will go wrong. -- Murphy's Law

Expressing and managing concurrent computations is indeed a concern of importance to develop applications that scale. A web application may want to use different processes for each of its incoming requests. Or maybe it wants to use a "thread pool" in some cases. In other case, our desktop application may want to send computations to a worker to not block the UI thread.

Processes in Pharo are implemented as green threads scheduled by the virtual machine, without depending on the machinery of the underlying operating system. This has several consequences on the usage of concurrency we can do:

Also, besides how expensive it is to create a process, to know how we could organize the processes in our application, we need to know how to synchronize such processes. For example, maybe we need to execute two processes concurrently and we want a third one to wait the completion of the first two before starting. Or maybe we need to maximize the parallelism of our application while enforcing the concurrent access to some piece of state. And all these issues require avoiding the creation of deadlocks.

TaskIt is a library that ease Process usage in Pharo. It provides abstractions to execute and synchronize concurrent tasks, and several pre-built mechanisms that are useful for many application developers. This chapter explores starts by familiarizing the reader with TaskIt's abstractions, guided by examples and code snippets. At the end, we discuss TaskIt extension points and possible customizations.

Introduction

Pharo 9 includes the coreTests group of BaselineOfTaskIt. Please, read the following instructions either to load another group, or to load in previous Pharo versions.

Loading

If you want a specific release such as v1.0, you can load the associated tag as follows:

Metacello new
  baseline: 'TaskIt';
  repository: 'github://pharo-contributions/taskit:v1.0';
  load.

Otherwise, if you want the latest development version, load master:

Metacello new
  baseline: 'TaskIt';
  repository: 'github://pharo-contributions/taskit';
  load.

Adding it as a Metacello dependency

Add the following in your metacello configuration or baseline specifying the desired version:

spec
    baseline: 'TaskIt'
    with: [ spec repository: 'github://pharo-contributions/taskit:v1.0' ]

For developers

To develop TaskIt on github we use iceberg. Just load iceberg and enter github's url to clone. Remember to switch to the desired development branch or create one on your own.

Changeslog

v1.0

Major Features

Entire changes log

Asynchronous Tasks

TaskIt's main abstraction are, as the name indicates it, tasks. A task is a unit of execution. By splitting the execution of a program in several tasks, TaskIt can run those tasks concurrently, synchronize their access to data, or order even help in ordering and synchronizing their execution.

First Example

Launching a task is as easy as sending the message schedule to a block closure, as it is used in the following first code example:

[ 1 + 1 ] schedule.

The selector name schedule is chosen in purpose instead of others such as run, launch or execute. TaskIt promises you that a task will be eventually executed, but this is not necessarilly right away. In other words, a task is scheduled to be executed at some point in time in the future.

This first example is however useful to clarify the first two concepts but it remains too simple. We are schedulling a task that does nothing useful, and we cannot even observe it's result (yet). Let's explore some other code snippets that may help us understand what's going on.

The following code snippet will schedule a task that prints to the Transcript. Just evaluating the expression below will make evident that the task is actually executed. However, a so simple task runs so fast that it's difficult to tell if it's actually running concurretly to our main process or not.

[ 'Happened' logCr ] schedule.

The real acid test is to schedule a long-running task. The following example schedules a task that waits for a second before writing to the transcript. While normal synchronous code would block the main thread, you'll notice that this one does not.

[ 1 second wait.
'Waited' logCr ] schedule.

Schedule vs fork

You may be asking yourself what's the difference between the schedule and fork. From the examples above they seem to do the same but they do not. In a nutshell, to understand why schedule means something different than fork, picture that using TaskIt two tasks may execute inside a same process, or in a pool of processes, while fork creates a new process every time.

You will find a longer answer in the section below explaining runners. In TaskIt, tasks are not directly scheduled in Pharo's global ProcessScheduler object as usual Process objects are. Instead, a task is scheduled in a task runner. It is the responsibility of the task runner to execute the task.

All valuables can be Tasks

We have been using so far block closures as tasks. Block closures are a handy way to create a task since they implictly capture the context: they have access to self and other objects in the scope. However, blocks are not always the wisest choice for tasks. Indeed, when a block closure is created, it references the current context with all the objects in it and its sender contexts, being a potential source of memory leaks.

The good news is that TaskIt tasks can be represented by almost any object. A task, in TaskIt's domain are valuable objects i.e., objects that will do some computation when they receive the value message. Actually, the message schedule is just a syntax sugar for:

(TKTTask valuable: [ 1 logCr ]) schedule.

We can then create tasks using message sends or weak message sends:

TKTTask valuable: (WeakMessageSend receiver: Object new selector: #yourself).
TKTTask valuable: (MessageSend receiver: 1 selector: #+ arguments: { 7 }).

Or even create our own task object:

Object subclass: #MyTask
	instanceVariableNames: ''
	classVariableNames: ''
	package: 'MyPackage'.

MyTask >> value
    ^ 100 factorial

and use it as follows:

TKTTask valuable: MyTask new.

Retrieving a Task's Result with Futures

In TaskIt we differentiate two different kind of tasks: some tasks are just scheduled for execution, they produce some side-effect and no result, some other tasks will produce (generally) a side-effect free value. When the result of a task is important for us, TaskIt provides us with a future object. A future is no other thing than an object that represents the future value of the task's execution. We can schedule a task with a future by using the future message on a block closure, as follows.

aFuture := [ 2 + 2 ] future.

One way to see futures is as placeholders. When the task is finished, it deploys its result into the corresponding future. A future then provides access to its value, but since we cannot know when this value will be available, we cannot access it right away. Instead, futures provide an asynchronous way to access it's value by using callbacks. A callback is an object that will be executed when the task execution is finished.

In general terms, we do not want to force a future to retrieve his value in a synchronous way. By doing so, we would be going back to the synchronous world, blocking a process' execution, and not exploiting concurrency. Later sections will discuss about synchronous (blocking) retrieval of a future's value.

A future can provide two kind of results: either the task execution was a success or a failure. A success happens when the task completes in a normal way, while a failure happens when an uncatched exception is risen in the task. Because of these distinction, futures allow the subscription of two different callbacks using the methods onSuccessDo: and onFailureDo:.

In the example below, we create a future and subscribe to it a success callback. As soon as the task finishes, the value gets deployed in the future and the callback is called with it.

aFuture := [ 2 + 2 ] future.
aFuture onSuccessDo: [ :result | result logCr ].

We can also subscribe callbacks that handle a task's failure using the onFailureDo: message. If an exception occurs and the task cannot finish its execution as expected, the corresponding exception will be passed as argument to the failure callback, as in the following example.

aFuture := [ Error signal ] future.
aFuture onFailureDo: [ :error | error sender method selector logCr ].

Futures accept more than one callback. When its associated task is finished, all its callbacks will be scheduled for execution. In other words, the only guarantee that callbacks give us is that they will be all eventually executed. However, the future itself cannot guarantee neither when will the callbacks be executed, nor in which order. The following example shows how we can subscribe several success callbacks for the same future.

future := [ 2 + 2 ] future.
future onSuccessDo: [ :v | FileStream stdout nextPutAll: v asString; cr ].
future onSuccessDo: [ :v | 'Finished' logCr ].
future onSuccessDo: [ :v | [ v factorial logCr ] schedule ].
future onFailureDo: [ :error | error logCr ].

Callbacks work wether the task is still running or already finished. If the task is running, callbacks are registered and wait for the completion of the task. If the task is already finished, the callback will be immediately scheduled with the already deployed value. See below a code examples that illustrates this: we first create a future and subscribes a callback before it is finished, then we wait for its completion and subscribe a second callback afterwards. Both callbacks are scheduled for execution.

future := [ 1 second wait. 2 + 2 ] future.
future onSuccessDo: [ :v | v logCr ].

2 seconds wait.
future onSuccessDo: [ :v | v logCr ].

Task Runners: Controlling How Tasks are executed

So far we created and executed tasks without caring too much on the form they were executed. Indeed, we knew that they were run concurrently because they were non-blocking. We also said already that the difference between a schedule message and a fork message is that scheduled messages are run by a task runner.

A task runner is an object in charge of executing tasks eventually. Indeed, the main API of a task runner is the schedule: message that allows us to tell the task runner to schedule a task.

aRunner schedule: [ 1 + 1 ]

A nice extension built on top of schedule is the future: message that allows us to schedule a task but obtain a future of its eventual execution.

future := aRunner future: [ 1 + 1 ]

Indeed, the messages schedule and future we have learnt before are only syntax-sugar extensions that call these respective ones on a default task runner. This section discusses several useful task runners already provided by TaskIt.

New Process Task Runner

A new process task runner, instance of TKTNewProcessTaskRunner, is a task runner that runs each task in a new separate Pharo process.

aRunner := TKTNewProcessTaskRunner new.
aRunner schedule: [ 1 second wait. 'test' logCr ].

Moreover, since new processes are created to manage each task, scheduling two different tasks will be executed concurrently. For example, in the code snippet below, we schedule twice a task that printing the identity hash of the current process.

aRunner := TKTNewProcessTaskRunner new.
task := [ 10 timesRepeat: [ 10 milliSeconds wait.
				('Hello from: ', Processor activeProcess identityHash asString) logCr ] ].
aRunner schedule: task.
aRunner schedule: task.

The generated output will look something like this:

'Hello from: 887632640'
'Hello from: 949846528'
'Hello from: 887632640'
'Hello from: 949846528'
'Hello from: 949846528'
'Hello from: 887632640'
'Hello from: 949846528'
'Hello from: 887632640'
'Hello from: 949846528'
'Hello from: 887632640'
'Hello from: 949846528'
'Hello from: 887632640'
'Hello from: 949846528'
'Hello from: 887632640'
'Hello from: 949846528'
'Hello from: 887632640'
'Hello from: 949846528'
'Hello from: 887632640'
'Hello from: 949846528'
'Hello from: 887632640'

First, you'll see that a different processes is being used to execute each task. Also, their execution is concurrent, as we can see the messages interleaved.

Local Process Task Runner

The local process runner, instance of TKTLocalProcessTaskRunner, is a task runner that executes a task in the caller process. In other words, this task runner does not run concurrently. Executing the following piece of code:

aRunner := TKTLocalProcessTaskRunner new.
future := aRunner schedule: [ 1 second wait ].

is equivalent to the following piece of code:

[ 1 second wait ] value.

or even:

1 second wait.

While this runner may seem a bit naive, it may also come in handy to control and debug task executions. Besides, the power of task runners is that they offer a polymorphic API to execute tasks.

The Worker Runner

The worker runner, instance of TKTWorker, is a task runner that uses a single process to execute tasks from a queue. The worker's single process removes one-by-one the tasks from the queue and executes them sequenceally. Then, schedulling a task into a worker means to add the task inside the queue.

A worker manages the life-cycle of its process and provides the messages start and stop to control when the worker thread will begin and end.

worker := TKTWorker new.
worker start.
worker schedule: [ 1 + 5 ].
worker stop.

By using workers, we can control the amount of alive processes and how tasks are distributed amongst them. For example, in the following example three tasks are executed sequenceally in a single separate process while still allowing us to use an asynchronous style of programming.

worker := TKTWorker new start.
future1 := worker future: [ 2 + 2 ].
future2 := worker future: [ 3 + 3 ].
future3 := worker future: [ 1 + 1 ].

Workers can be combined into worker pools.

The Worker pool

A TaskIt worker pool is pool of worker runners, equivalent to a ThreadPool from other programming languages. Its main purpose is to provide several worker runners and decouple us from the management of threads/processes. A worker pool is a runner in the sense we use the schedule: message to schedule tasks in it.

In TaskIt we count with two kind of worker pools:

TKTWorkerPool

Internally, all runners inside a TKTWorkerPool pool have a task queue. This pool counts with a worker that is in charge of scheduling tasks into one of the available workers, taking in account the work load of each worper.

Different applications may have different concurrency needs, thus, TaskIt worker pools do not provide a default amount of workers. Before using a pool, we need to specify the maximum number of workers in the pool using the poolMaxSize: message. A worker pool will create new workers on demand.

pool := TKTWorkerPool new.
pool poolMaxSize: 5.

TaskIt worker pools use internally an extra worker to synchronize the access to its task queue. Because of this, a worker pool has to be manually started using the start message before scheduled messages start to be executed.

pool := TKTWorkerPool new.
pool poolMaxSize: 5.
pool start.
pool schedule: [ 1 logCr ].

Once we are done with the worker pool, we can stop it by sending it the stop message.

pool stop.

TKTCommonQueueWorkerPool

Internally, all runners inside a TKTCommonQueueWorkerPool pool share a common queue. This pool counts with a watchdog that is in charge of ensuring that all the workers are alive, and in charge of reducing the amount of workers when the load of work goes down.

Different applications may have different concurrency needs, thus, TaskIt worker pools do not provide a default amount of workers. Before using a pool, we need to specify the maximum number of workers in the pool using the poolMaxSize: message. A worker pool will create new workers on demand.

pool := TKTCommonQueueWorkerPool new.
pool poolMaxSize: 5.

TaskIt worker pools use internally an extra worker to synchronize the access to its task queue. Because of this, a worker pool has to be manually started using the start message before scheduled messages start to be executed.

pool := TKTCommonQueueWorkerPool new.
pool poolMaxSize: 5.
pool start.
pool schedule: [ 1 logCr ].

Once we are done with the worker pool, we can stop it by sending it the stop message.

pool stop.

Managing Runner Exceptions

As we stated before, in TaskIt the result of a task can be interesting for us or not. In case we do not need a task's result, we will schedule it usign the schedule or schedule: messages. This is a kind of fire-and-forget way of executing tasks. On the other hand, if the result of a task execution interests us we can get a future on it using the future and future: messages. These two ways to execute tasks require different ways to handle exceptions during task execution.

First, when an exception occurs during a task execution that has an associated future, the exception is forwarded to the future. In the future we can subscribe a failure callback using the onFailureDo: message to manage the exception accordingly.

However, on a fire-and-forget kind of scheduling, the execution and results of a task is not anymore under our control. If an exception happens in this case, it is the responsibility of the task runner to catch the exception and manage it gracefully. For this, each task runners is configured with an exception handler in charge of it. TaskIt exception handler classes are subclasses of the abstract TKTExceptionHandler that defines a handleException: method. Subclasses need to override the handleException: method to define their own way to manage exceptions.

TaskIt provides by default a TKTDebuggerExceptionHandler, accessible from the configuration TKTConfiguration errorHandler that will open a debugger on the raised exception. The handleException: method is defined as follows:

handleException: anError 
	anError debug

Changing a runner's exception handler can be done by sending it the exceptionHandler: message, as follows:

aRunner exceptionHandler: TKTDebuggerExceptionHandler new.

Task Timeout

In TaskIt tasks can be optionally schedulled with a timeout. A task's timeout limits the execution of a task to a window of time. If the task tries to run longer than the specified time, the task is cancelled automatically. This behaviour is desirable because a long running tasks may be a hint towards a problem, or it can just affect the responsiveness of our application.

A task's timeout can be provided while scheduling a task in a runner, using the schedule:timeout: message, asFollows:

aRunner schedule: [1 second wait] timeout: 50 milliSeconds.

If the task surpasses the timeout, the scheduled task will be cancelled with an exception.

A task's timeout must not be confused with a future's synchronous access timeout (explained below). The task timeout governs the task execution, while a future's timeout governs only the access to the future value. If a future times out while accessing its value, the task will continue its execution normally.

Where do tasks and callbacks run by default?

As we stated before, the messages #schedule and #future will schedule a task implicitly in a default task runner. To be more precise, it is not a default task runner but the current task runner that is used. In other words, task scheduling is context sensitive: if a task A is beign executed by a task runner R, new tasks scheduled by A are implicitly scheduled R. The only exception to this is when there is no such task runner, i.e., when the task is scheduled from, for example, a workspace. In that case a default task runner is chosen for scheduling.

Note: In the current version of taskit (v1.0) the default task runner is the global worker pool that can be explicitly accessed evaluating the following expression TKTConfiguration runner.

Something similar happens with callbacks. Before we said that callbacks are eventually and concurrently executed. This happens because callbacks are scheduled as normal tasks after a task's execution. This scheduling follows the rules from above: callbacks will be scheduled in the task runner where it's task was executed.

Advanced Futures

Future combinators

Futures are a nice asynchronous way to obtain the results of our eventually executed tasks. However, as we do not know when tasks will finish, processing that result will be another asynchronous task that needs to start as soon as the first one finishes. To simplify the task of future management, TaskIt futures come along with some combinators.

The collect: combinator does, as its name says, the same than the collection's API: it transforms a result using a transformation.

future := [ 2 + 3 ] future.
(future collect: [ :number | number factorial ])
    onSuccessDo: [ :result | result logCr ].

The collect: combinator returns a new future whose value will be the result of transforming the first future's value.

The select: combinator does, as its name says, the same than the collection's API: it filters a result satisfying a condition.

future := [ 2 + 3 ] future.
(future select: [ :number | number even ])
    onSuccessDo: [ :result | result logCr ];
    onFailureDo: [ :error | error logCr ].

The select: combinator returns a new future whose result is the result of the first future if it satisfies the condition. Otherwise, its value will be a NotFound exception.

The flatCollect: combinator is similar to the collect: combinator, as it transforms the result of the first future using the given transformation block. However, flatCollect: excepts as the result of its transformation block a future.

future := [ 2 + 3 ] future.
(future flatCollect: [ :number | [ number factorial ] future ])
    onSuccessDo: [ :result | result logCr ].

The flatCollect: combinator returns a new future whose value will be the result the value of the future yielded by the transformation.

The zip: combinator combines two futures into a single future that returns an array with both results.

future1 := [ 2 + 3 ] future.
future2 := [ 18 factorial ] future.
(future1 zip: future2)
    onSuccessDo: [ :result | result logCr ].

zip: works only on success: the resulting future will be a failure if any of the futures is also a failure.

The on:do: allows us to transform a future that fails with an exception into a future with a result.

future := [ Error signal ] future
    on: Error do: [ :error | 5 ].
future onSuccessDo: [ :result | result logCr ].

The fallbackTo: combinator combines two futures in a way such that if the first future fails, it is the second one that will be taken into account.

failFuture := [ Error signal ] future.
successFuture := [ 1 + 1 ] future.
(failFuture fallbackTo: successFuture)
    onSuccessDo: [ :result | result logCr ].

In other words, fallbackTo: produces a new future whose value is the first's future value if success, or it is the second future's value otherwise.

The firstCompleteOf: combinator combines two futures resulting in a new future whose value is the value of the future that finishes first, wether it is a success or a failure.

failFuture := [ 1 second wait. Error signal ] future.
successFuture := [ 1 second wait. 1 + 1 ] future.
(failFuture firstCompleteOf: successFuture)
    onSuccessDo: [ :result | result logCr ];
    onFailureDo: [ :error | error logCr ].

In other words, fallbackTo: produces a new future whose value is the first's future value if success, or it is the second future's value otherwise.

The andThen: combinator allows to chain several futures to a single future's value. All futures chained using the andThen: combinator are guaranteed to be executed sequenceally (in contrast to normal callbacks), and all of them will receive as value the value of the first future (instead of the of of it's preceeding future).

([ 1 + 1 ] future
    andThen: [ :result | result logCr ])
    andThen: [ :result | FileStream stdout nextPutAll: result ].

This combinator is meant to enforce the order of execution of several actions, and this it is mostly for side-effect purposes where we want to guarantee such order.

Synchronous Access

Sometimes, although we do not recommend it, you will need or want to access the value of a task in a synchronous manner: that is, to wait for it. We do not recommend waiting for a task because of several reasons:

However, since experienced users may still need this feature, TaskIt futures provide three different messages to access synchronously its result: isFinished, waitForCompletion: and synchronizeTimeout:.

isFinished is a testing method that we can use to test if the corresponding future is still finished or not. The following piece of code shows how we could implement an active wait on a future:

future := [1 second wait] future.
[future isFinished] whileFalse: [50 milliseconds wait].

An alternative version for this code that does not require an active wait is the message waitForCompletion:. waitForCompletion: expects a duration as argument that he will use as timeout. This method will block the execution until the task finishes or the timeout expires, whatever comes first. If the task did not finish by the timeout, a TKTTimeoutException will be raised.

future := [1 second wait] future.
future waitForTimeout: 2 seconds.

future := [1 second wait] future.
[future waitForTimeout: 50 milliSeconds] on: TKTTimeoutException do: [ :error | error logCr ].

Finally, to retrieve the future's result, futures understand the synchronizeTimeout: message, that receives a duration as argument as its timeout. If a successful value is available by the timeout, then the result is returned. If the task finished by the timeout with a failure, an UnhandledError exception is raised wrapping the original exception. Otherwise, if the task is not finished by the timeout a TKTTimeoutException is raised.

future := [1 second wait. 42] future.
(future synchronizeTimeout: 2 seconds) logCr.

future := [ self error ] future.
[ future synchronizeTimeout: 2 seconds ] on: Error do: [ :error | error logCr ].

future := [ 5 seconds wait ] future.
[ future synchronizeTimeout: 1 seconds ] on: TKTTimeoutException do: [ :error | error logCr ].

Services

TaskIt furnishes a package implementing services. A service is a process that executes a task over and over again. You can think about a web server, or a database server that needs to be up and running and listening to new connections all the time.

Each TaskIt service may define a setUp, a tearDown and a stepService. setUp is run when a service is being started, shutDown is run when the service is being shutted down, and stepService is the main service action that will be executed repeateadly.

Creating a new service is as easy as creating a subclass of TKTService. For example, let's create a service that watches the existence of a file. If the file does not exists it will log it to the transcript. It will also log when the service starts and stops to the transcript.

TKTService subclass: #TKTFileWatcher
  instanceVariableNames: 'file'
  classVariableNames: ''
  package: 'TaskItServices-Tests'

Hooking on the service's setUp and tearDown is as easy as overriding such methods:

TKTFileWatcher >> setUp
  super setUp.
  Transcript show: 'File watcher started'.

TKTFileWatcher >> tearDown
  super tearDown.
  Transcript show: 'File watcher finished'.

Finally, setting the watcher action is as easy as overriding the stepService message.

TKTFileWatcher >> stepService
  1 second wait.
  file asFileReference exists
    ifFalse: [ Transcript show: 'file does not exist!' ]

Making the service work requires yet an additional method: the service name. Each service should provide a unique name through the name method. TaskIt verifies that service names are unique and prevents the starting of two services with the same name.

TKTFileWatcher >> name
  ^ 'Watcher file: ', file asString

Once your service is finished, starting it is as easy as sending it the start message.

watcher := TKTFileWatcher new.
watcher file: 'temp.txt'.
watcher start.

Requesting the stop of a service is done by sending it the stop message. Know that sending the stop message will not stop the service right away. It will actually request it to stop, which will schedule the tear down of the service and kill its process after that.

watcher stop.

Stopping the process in an unsafe way is also supported by sending it the kill message. Killing a service will stop it right away, interrupting whatever task it was executing.

watcher kill.

Creating Services with Blocks

Additionally, TaskIt provides an alternative means to create services through blocks (or valuables actually) using TKTParameterizableService. An alternative implementation of the file watcher could be done as follows.

service := TKTParameterizableService new.
service name: 'Generic watcher service'.
service onSetUpDo: [ Transcript show: 'File watcher started' ].
service onTearDownDo: [ Transcript show: 'File watcher finished' ].
service step: [
  'temp.txt' asFileReference exists
    ifFalse: [ Transcript show: 'file does not exist!' ] ].

service start.

ActIt

ActIt is only available for pharo 7, since it requires stateful traits support

Actors

In this new version of TaskIt we are also providing actors, leveraging the whole taskit implementation, and adding some extra features.

Our implementation is inspired by "Actalk: a Testbed for Classifying and Designing Actor Languages in the Smalltalk-80 Environment", but adapted to the new Pharo state-full traits.

The actor's model proposes to provide an interface to interact with a process. Allowing the user of a process to ask for service to a process, by message sending.

In order to achieve the same kind of behaviour in smalltalk, we subordinate a process to expose and serve the behaviour of an existing object.

How to use it

For achieving this we propose the trait TKTActorBehaviour, which is responsible to extend a class by adding the message actor.

This actor message will return an instance of the class TKTActor, which will act as a proxy (managed by #doesnotUnderstand: message) to the object, but transforming the calls into tasks, to be executed sequentially.

Each method sent to the actor, will return a future.

For making your domain object to become an actor, add the usage of the trait TKTActorBehaviour as following:

Object subclass: #MyDomainObject
	uses: TKTActorBehaviour
	instanceVariableNames: 'value'
	classVariableNames: ''
	package: 'MyDomainObjectPack'


myObject := MyDomainObject new. 
myObject setValue: 2.

self assert: myObject getValue equals: 2.

myActor := myObject actor.
self assert:( myActor getValue isKindOf: TKTFuture).
self assert:( myActor getValue synchronizeTimeout: 1 second) = myObject getValue.

How to act

So, to add this trait is not enough to make your Object into an Actor. You have to have in mind that any time that you use smalltalk self in your object, you are doing a synchronous call. That each time that you give your object's reference by parameter, instead of the actor's reference, your object will work as a classic object as well.

For allowing the user to do async calls to self, the trait provides de propery smalltalk aself (Async-self).

Remind also that even when actors provide a nice way to avoid simple semaphores, they do not fully avoid deadlocks, since the interaction in between actors is:

Process dashboard

TaskIt provides as well a far more interesting process dashboard, based on announcements.

For accessing this dashboard, go to World menu > TaskIt > Process dashboard, as showed in the following image.

Please add an issue. Image is not loading!

The window has two tabs.

TaskIt tab

The first one showing the processes launched by TaskIt looks like

Please add an issue. Image is not loading!

The showed table has six fields.

Some of those fields have attached some contextual menu.

Do right-click on top of the name of the process for interacting with the process Please add an issue. Image is not loading!

The options given are

Do right-click on top of the message selector for interacting with selector|method Please add an issue. Image is not loading!

The options given are

Finally, do right-click on top of the receiver for interacting with it Please add an issue. Image is not loading!

The option given is

###System tab

Finally, to allow the user to use just one interface. There is a second tab that shows the processes that were not spawnend by TaskIt.

Please add an issue. Image is not loading!

Based on announcements

The TaskIt browser is based on announcements. This fact allows the interface to be dynamic, having allways fresh information, without needing a pulling process, as in the native process browser.

Debugger

TaskIt comes with a debugger extension for Pharo that can be installed by loading the 'debug' group of the baseline (the debugger is not loaded by any other group):

Metacello new
  baseline: 'TaskIt';
  repository: 'github://pharo-contributions/taskit';
  load: 'debug'.

After installation the TaskIt debugger extension will automatically be available to processes that are associated with a task or future. You can manually enable or disable the debugger extension by evaluating TKTDebugger enable. or TKTDebugger disable..

The TaskIt debugger shows an augmented stack, in which the process that represents the task or future is at the top and the process that created the task or future is at the bottom (recursively for tasks and futures created from other tasks and futures). The following visualisation shows one future process (top) with frames 1 and 2 and the corresponding creator process (frames 3 and 4):

-------------------
|     frame 1     |
-------------------
|     frame 2     |
-------------------
-------------------
|     frame 3     |
-------------------
|     frame 4     |
-------------------

The implementation and conception of this debugger extension can be found in Max Leske's Master's thesis entitled "Improving live debugging of concurrent threads".

Configuration

TaskIt bases it general configuration in the idea of profiles. A profile define some major features needed by the library to work properly.

TKTProfile

Defines the default profiles, on the class side, along side with the default profile to use

defaultProfile
	^ #development
	
development
	<profile: #development>
	^ TKTProfile
		on:
			{(#debugging -> true).
			(#runner -> TKTCommonQueueWorkerPool createDefault).
			(#poolWorkerProcess -> TKTDebuggWorkerProcess).
			(#process -> TKTRawProcess).
			(#errorHandler -> TKTDebuggerExceptionHandler).
			(#processProvider -> TKTTaskItProcessProvider new).
			(#serviceManager -> TKTServiceManager new)} asDictionary
production
	<profile: #production>
	^ TKTProfile
		on:
			{
			(#debugging -> false) .
			(#runner -> TKTCommonQueueWorkerPool createDefault).
			(#poolWorkerProcess -> TKTWorkerProcess).
			(#process -> Process).
			(#errorHandler -> TKTExceptionHandler).
			(#processProvider -> TKTPharoProcessProvider new).
			(#serviceManager -> TKTServiceManager new)} asDictionary

test
	<profile: #test>
	^ TKTProfile
		on:
			{(#debugging -> false).
			(#runner -> TKTCommonQueueWorkerPool createDefault).
			(#poolWorkerProcess -> TKTWorkerProcess).
			(#process -> Process).
			(#errorHandler -> TKTExceptionHandler).
			(#processProvider -> TKTTaskItProcessProvider new).
			(#serviceManager -> TKTServiceManager new)} asDictionary

There are three ways of modifying the running profile.

The first one and simpler, is to go to the settings browser and choose the available profile in the section 'TaskIt execution profile' In this combo box you will find all the predefined profiles. The second way is to use code

	TKTConfiguration profileNamed: #development

The method profileNamed: aProfile receives as parameter a name of a predefined profile. This way is handy for automatazing behaviour.

The third one finally is to manually build your own profile, and set it up, agan by code

   profile := TKTProfile new. 
   ... 
   configure 
   ...
	TKTConfiguration profile: profile.

For adding a new profile you have only to define a new method in the class side of TKTProfile, adding the pragma <profile:#profileName>

This method should return an instance of TKTProfile, or polimorphic to it.

Since some configurations may not be compatible (since the debugging mode has some specific restrictions), a check of sanity of the configuration is done during the activation of the profile. Therefore, it is expected to have exceptions with some configurations.

As to adding a new profile, everything is on the code. You just have to address the method related with the profile that you want to modify and modify it. If the modified profile is the one on usage, the changes will have no effect up to the next time that you activily set this profile. You can use any of the ways of setting up the current profile for forcing the reload of the profile.

At some points ,you may need to switch the working profile, or part of it, not for all the image but for some specific computation. We have defined some different methods that would allow you to achieve this feature by code.

TKTConfiguration>>

profileNamed: aProfileName during: aBlock      	
	" Uses a predefined profile, during the execution of the given block "
profile: aProfile during: aBlock					
	" Uses a profile, during the execution of the given block "
errorHandler: anErrorHandler during: aBlock		
	" Uses a given errorHandler, during the execution of the given block "
poolWorkerProcess: anObject during: aBlock			
	" Uses a given Pool-Worker process, during the execution of the given block "
process: anObject during: aBlock					
	" Uses a given process, during the execution of the given block "
processProvider: aProcessProvider during: aBlock	
	" Uses a given Process provider, during the execution of the given block "
serviceManager: aManager during: aBlock			
	" Uses a given Service manager, during the execution of the given block "

An example of usage

future := TKTConfiguration>>profileNamed: #test during: [ [2 + 2 ] future ]

Future versions