Awesome

CircuitPython_Atom_helper

small python script as helper for CircuitPython development with Atom under linux

features:

• upload python script as 'main.py'
• upload python script with original name
• upload python script to lib folder
• compile arduino sketch and upload via disc / drive uf2
  • arduino IDE (1.8.19) and arduino-cli supported
  • on arduino IDE you have to set the target board in the IDE (then it can be closed..)
  • on arduino-cli currently the target board is hardcoded in the script to use esp23s3..
  • there are room for improvements → read target architecture / board from some sort of config file for example...

tested in combination with Atom Shell Commands Package (example configuration can be found in example_atom-shell-commands.cson)

just works fine with codium (VSCode) have a look at the tasks.json example configuration.

for the arduino upload you need to have auto-mount enabled for the uf2 disc..