Awesome

Python T-Display-S3 ST7789 driver for MicroPython

This driver is a quick hack to get the ST7789 display working on the T-Display-S3 board. It is based on devbis' st7789py_mpy module from https://github.com/devbis/st7789py_mpy.

This driver adds support for:

• 320x240, 170x320, 240x240 and 135x240 pixel displays
• Display rotation
• Hardware based scrolling
• Drawing text using 8 and 16 bit wide bitmap fonts with heights that are multiples of 8. Included are 12 bitmap fonts derived from classic pc BIOS text mode fonts.
• Drawing text using converted TrueType fonts.
• Drawing converted bitmaps
• Parallel interface.

This is a work in progress. Documentation can be found in the docs directory and at https://penfold.owt.com/st7789s3.

Examples

See the examples directory for example programs that run on the LILYGO® TTGO T-Display-S3. The example programs require the tft_config.py module to be present.

Fonts

See the subdirectories in the fonts directory for the converted font modules used in the examples. These modules can be compiled using the mpy-cross compiler before uploading to save memory.