Awesome

Use an ESP32 to display GIFs on your Project Mc2 LED purse

YouTube - Proof of concept WiFi controller

Hardware (BOM)

Project Mc2 LED Purse (Usually costs ~$6): Amazon, Adafruit article
- A cheap 16x32px LED display you can harvest. The deafult driver/app requires 3.5mm headphone jack and phone connected at all times, otherwise after 30 seconds your pattern will freeze, then turn off. You're also limited to like 6 colors. So let's make our own driver!
- If you want to daisy-chain from this display, it's missing an output socket and ribbon cables:
  - SMT 2x8 Male IDC Socket: AliExpress
  - 16P IDC Cable (might have come with your panel): AliExpress
PCB I designed to drive HUB75 panels with an ESP32: Buy on Tindie!
- This part is optional, but greatly simplifies your wiring!
- If you don't want to use my PCB, you can wire the display yourself manually using dupont connectors following ESP32_FORUM_PINOUT from MatrixHardware_ESP32_V0.h
ESP32-DEVKIT-V1: Amazon ($14 for 2)

Total cost should be quite low for a 32x16 scantype LED panel with Wifi/BT, powered by micro-USB, capable of: playing gifs, scrolling text, and FastLED!

Assembly Instructions

Some assembly required! (Soldering ~46 pins.) Full assembly instructions and more detailed information can be found here: ASSEMBLY.md

Software

For links to software I recommend using, please see SOFTWARE.md

Please note: my PCB works with SmartMatrix library, not PxMatrix.

Mounting

I have no solution to mount the LED display anywhere. For the time being I'm using half of the purse shell as an ugly mount. This display is missing the common screw mounts on HUB75 panels. I'd love to hear your mounting ideas!

Power usage and powering your project

Brightness	Power
25/255	1W (0.2A @ 5V)
255/255	5W (1A @ 5V)

If you plan to daisy-chain these panels: please power the panels directly, then siphon power from your panels to your ESP32. The ESP32 board traces are not designed to supply extra power for these types of panels. However, you can safely get away with it for a single LED panel if you really want to keep it simple. For more info, see POWER.md!