Home

Awesome

Prusa Firmware MK3

This repository contains the source code and the development versions of the firmware running on the Original Prusa i3 MK3S/MK3/MK2.5S/MK2.5 line of printers.

The latest official builds can be downloaded from Prusa Drivers. Pre-built development releases are also available here.

The firmware for the Original Prusa i3 printers is proudly based on Marlin 1.0.x by Scott Lahteine (@thinkyhead) et al. and is distributed under the terms of the GNU GPL 3 license.

This repository contains development material only!

Build

Linux

There are two ways to build Prusa-Firmware on Linux: using CMake (recommended for developers) or with PF-build which is more user-friendly for casual users.

CMake

Quick-start

The workflow should be pretty straightforward for anyone with development experience. After installing git and a recent version of python 3 all you have to do is:

# clone the repository
git clone https://github.com/prusa3d/Prusa-Firmware
cd Prusa-Firmware

# automatically setup dependencies
./utils/bootstrap.py

# configure and build
mkdir build
cd build
cmake .. -G Ninja -DCMAKE_BUILD_TYPE=Release -DCMAKE_TOOLCHAIN_FILE=../cmake/AvrGcc.cmake
ninja

Detailed CMake guide

Building with cmake requires:

Python >= 3.8 is also required with the following modules:

Additionally gettext is required for translators.

Assuming a recent Debian/Ubuntu distribution, install the dependencies globally with:

sudo apt-get install cmake ninja python3-pyelftools python3-polib python3-regex gettext

Prusa-Firmware depends on a pinned version of avr-gcc and the external prusa3dboards package. These can be setup using ./utils/bootstrap.py:

# automatically setup dependencies
./utils/bootstrap.py

which will download and unpack them inside the .dependencies directory. ./utils/bootstrap.py will also install cmake, ninja and the required python packages if missing, although installing those through the system's package manager is usually preferred.

You can then proceed by creating a build directory, configure for AVR and build:

# configure
mkdir build
cd build
cmake .. -G Ninja -DCMAKE_BUILD_TYPE=Release -DCMAKE_TOOLCHAIN_FILE=../cmake/AvrGcc.cmake

# build
ninja

By default all variants are built. There are several ways to restrict the build for development. During configuration you can set:

When building the following targets are available:

Automated tests

Automated tests are built with cmake by configuring for the current host:

# clone the repository
git clone https://github.com/prusa3d/Prusa-Firmware
cd Prusa-Firmware

# automatically setup dependencies
./utils/bootstrap.py

# configure and build
mkdir build
cd build
cmake .. -G Ninja
ninja

# run the tests
ctest

PF-build

PF-build is recommended for users without development experience. Download or clone the repository, then run PF-build and simply follow the instructions:

cd Prusa-Firmware
./PF-build.sh

PF-build currently assumes a Debian/Ubuntu (or derivative) distribution.

Windows

Visual Studio Code (VSCode)

Prerequisites

First time setup

Start by cloning the Prusa-Firmware repository

git clone https://github.com/prusa3d/Prusa-Firmware

Open the Prusa-Firmware folder in VScode.

Open a new terminal in VScode (Terminal→New Terminal) and run

python .\utils\bootstrap.py

This will download all dependencies required to build the firmware. You should see a .dependencies folder in the Prusa-Firmware folder.

Reload VScode. If all works correctly you should see the VScode automatically configuring the CMake project for you. If this doesn't happen you likely need to set the CMake kit; This can be done in two ways:

  1. Type Ctrl+Shift+P and search for CMake: Select a Kit. Select avr-gcc. If none appear, Scan for kits first.
  2. If 1) does not work for some reason, as a last resort you can edit the CMake Tools settings. Search for "Additional Kits" and add .vscode/cmake-kits.json to the list.

After updating the kit, you may need to reload VScode.

Building

To start building a firmware, click the CMake Tools plugin icon on the far left side. You will get a very large list of targets to build. Find the firmware you'd like to build (like MK3S_ENGLISH) and select the small icon which shows "Build" when hovered over.

The built .hex file can then be found in folder Prusa-Firmware/build

Arduino IDE (deprecated)

Using Arduino IDE is still possible, but no longer supported. Prusa-Firmware requires a complex multi-step build process that cannot be done automatically with just the IDE. For a long time we provided instructions to use Arduino in combination with shell scripts, however starting with 3.13 the build system has been completely switched to cmake.

Building with Arduino IDE results in a limited firmware:

For these reasons, you should think twice before reporting issues for a firmware built with Arduino. If you find a bug in the firmware, building and testing using CMake should be your first thought. Issues regarding Arduino builds are answered by the community and are not officially supported.

Environment preparation

Install "Arduino Software IDE" from the official website https://www.arduino.cc -> Software -> Downloads. Version 1.8.19 or higher is required.

Setup Arduino to install and use the Prusa board definitions:

Source code preparation

Clone or download this repository to your local drive.

In the subdirectory Firmware/variants/ select the configuration file (.h) corresponding to your printer model and manually copy it to Firmware/Configuration_prusa.h

Run "Arduino IDE", then

Compilation and upload