Awesome

HomeAssistant component: attributes

The attributes platform supports sensors which break out a specified attribute from other entities.

To enable the attributes sensor in your installation, add the following to your configuration.yaml file:

# Example configuration.yaml entry
sensor:  
  - platform: attributes
    friendly_name: "Batteries"
    attribute: battery_level
    device_class: battery
    entities:
      - sensor.myslipo_1_0
      - sensor.myslipo_2_0
      - sensor.myslipo_3_0
      - sensor.myslipo_4_0
      
  - platform: attributes
    friendly_name: "Last changed"
    attribute: last_triggered
    icon: 'mdi:clock'
    time_format: '%e %B - %H:%M:%S'
    entities:
      - automation.temp_changed

Configuration variables:

• entities (Required): A list of entity IDs that you want to read attributes from.
• attribute (Required): Which attribute to extract from defined entity IDs.
• friendly_name (Optional): Name to use in the Frontend (will be the same for all entities specified).
• icon (Optional): Icon to use in the Frontend.
• device_class (Optional): Defines the device_class, if not specified it will be the same as parent.
• unit_of_measurement (Optional): Defines the units of measurement of the sensor, if any.
• round_to (Optional): Round numbers to 'x' decimals, if zero it will become whole number. Skip this field if you extracting a string or you want to leave the value as it is.
• value_template (Optional): In case you need to do a math with the value ie. offset, bit gain, etc. (will be the same for all entities specified).
• time_format (Optional): strftime type string to beautify time attribute output. Applicable only when attribute last_changed or last_triggered is selected. Cheatsheet for strftime formatting here.

Install via HACS

You can find this integration in the community store.

Install manually

You need to copy the attributes folder from this repo to the custom_components folder in the root of your configuration. The file tree should look like this:

└── ...
└── configuration.yaml
└── custom_components
    └── attributes
        └── __init__.py
        └── manifest.json
        └── sensor.py

Note: if the custom_components directory does not exist, you need to create it.

Examples

This example shows how to extract the battery_level attribute.

sensor:
  - platform: attributes
    friendly_name: "Batteries"
    attribute: battery_level
    unit_of_measurement: "%"
    entities:
      - sensor.test1
      - sensor.test2
      - sensor.test3

If an attribute is battery or battery_level and you don't specify icon or device_class is not battery, the following icon_template is applied (fullness). The result is that the battery icon becomes as full as the battery based on percentage.

{% if batt == 'unknown' %}
    {% if batt > 95 %}
        mdi:battery
    {% elif batt > 85 %}
        mdi:battery-90
    {% elif batt > 75 %}
        mdi:battery-80
    {% elif batt > 65 %}
        mdi:battery-70
    {% elif batt > 55 %}
        mdi:battery-60
    {% elif batt > 45 %}
        mdi:battery-50
    {% elif batt > 35 %}
        mdi:battery-40
    {% elif batt > 25 %}
        mdi:battery-30
    {% elif batt > 15 %}
        mdi:battery-20
    {% elif batt > 10 %}
        mdi:battery-10
    {% else %}
        mdi:battery-outline
    {% endif %}
{% else %}
    mdi:battery-unknown
{% endif %}

This example shows how to extract the last_triggered attribute in human-readable format.

sensor:
  - platform: attributes
    friendly_name: "Last changed"
    attribute: last_triggered
    icon: 'mdi:clock'
    time_format: '%e %B - %H:%M:%S'
    entities:
      - automation.dummy_changed

If you select attribute last_changed or last_triggered and you specify time_format, your datetime will get translated to your local timezone and will be formatted like strftime() e.g., 2017-08-08T13:14:21.651894+00:00 gets translated into the specified strftime format with timezone applied. The result would be: 8 August 15:14:21 if your timezone is UTC+2