Home

Awesome

µStreamer

CI Discord

µStreamer is a lightweight and very quick server to stream MJPEG video from any V4L2 device to the net. All new browsers have native support of this video format, as well as most video players such as mplayer, VLC etc. µStreamer is a part of the PiKVM project designed to stream VGA and HDMI screencast hardware data with the highest resolution and FPS possible.

µStreamer is very similar to mjpg-streamer with input_uvc.so and output_http.so plugins, however, there are some major differences. The key ones are:

FeatureµStreamermjpg-streamer
Multithreaded JPEG encoding✔✘
Hardware image encoding<br>on Raspberry Pi✔✘
Behavior when the device<br>is disconnected while streaming✔ Shows a black screen<br>with NO SIGNAL on it<br>until reconnected✘ Stops the streaming <sup>1</sup>
DV-timings support -<br>the ability to change resolution<br>on the fly by source signal✔☹ Partially yes <sup>1</sup>
Option to skip frames when streaming<br>static images by HTTP to save the traffic✔ <sup>2</sup>✘
Streaming via UNIX domain socket✔✘
Systemd socket activation✔✘
Debug logs without recompiling,<br>performance statistics log,<br>access to HTTP streaming parameters✔✘
Option to serve files<br>with a built-in HTTP server✔☹ Regular files only
Signaling about the stream state<br>on GPIO using libgpiod✔✘
Access to webcam controls (focus, servos)<br>and settings such as brightness via HTTP✘✔
Compatibility with mjpg-streamer's API✔:)

Footnotes:

TL;DR

If you're going to live-stream from your backyard webcam and need to control it, use mjpg-streamer. If you need a high-quality image with high FPS - µStreamer for the win.

Installation

Building

You need to download the µStreamer onto your system and build it from the sources.

Preconditions

You'll need make, gcc, libevent with pthreads support, libjpeg9/libjpeg-turbo and libbsd (only for Linux).

To enable GPIO support install libgpiod and pass option WITH_GPIO=1. If the compiler reports about a missing function pthread_get_name_np() (or similar), add option WITH_PTHREAD_NP=0 (it's enabled by default). For the similar error with setproctitle() add option WITH_SETPROCTITLE=0.

Make

The most convenient process is to clone the µStreamer Git repository onto your system. If you don't have Git installed and don't want to install it either, you can download and unzip the sources from GitHub using wget https://github.com/pikvm/ustreamer/archive/refs/heads/master.zip.

$ git clone --depth=1 https://github.com/pikvm/ustreamer
$ cd ustreamer
$ make
$ ./ustreamer --help

Update

Assuming you have a µStreamer clone as discussed above you can update µStreamer as follows.

$ cd ustreamer
$ git pull
$ make clean
$ make

Usage

For M2M hardware encoding on Raspberry Pi, you need at least 5.15.32 kernel. OpenMAX and MMAL support on older kernels is deprecated and removed.

Without arguments, ustreamer will try to open /dev/video0 with 640x480 resolution and start streaming on http://127.0.0.1:8080. You can override this behavior using parameters --device, --host and --port. For example, to stream to the world, run:

# ./ustreamer --device=/dev/video1 --host=0.0.0.0 --port=80

:exclamation: Please note that since µStreamer v2.0 cross-domain requests were disabled by default for security reasons. To enable the old behavior, use the option --allow-origin=\*.

The recommended way of running µStreamer with TC358743-based capture device on Raspberry Pi:

$ ./ustreamer \
    --format=uyvy \ # Device input format
    --encoder=m2m-image \ # Hardware encoding on V4L2 M2M driver
    --workers=3 \ # Workers number
    --persistent \ # Suppress repetitive signal source errors (for example when HDMI cable was disconnected)
    --dv-timings \ # Use DV-timings
    --drop-same-frames=30 # Save the traffic

:exclamation: Please note that to use --drop-same-frames for different browsers you need to use some specific URL /stream parameters (see URL / for details).

You can always view the full list of options with ustreamer --help.

Docker (Raspberry Pi 4 HDMI)

Preparations

Add following lines to /boot/firmware/usercfg.txt:

gpu_mem=128
dtoverlay=tc358743

Check size of CMA:

$ dmesg | grep cma-reserved
[    0.000000] Memory: 7700524K/8244224K available (11772K kernel code, 1278K rwdata, 4320K rodata, 4096K init, 1077K bss, 281556K reserved, 262144K cma-reserved)

If it is smaller than 128M add following to /boot/firmware/cmdline.txt:

cma=128M

Save changes and reboot.

Launch

Start container:

$ docker run --device /dev/video0:/dev/video0 -e EDID=1 -p 8080:8080 pikvm/ustreamer:latest

Then access the web interface at port 8080 (e.g. http://raspberrypi.local:8080).

Custom config

$ docker run --rm pikvm/ustreamer:latest \
    --format=uyvy \
    --workers=3 \
    --persistent \
    --dv-timings \
    --drop-same-frames=30

EDID

Add -e EDID=1 to set HDMI EDID before starting ustreamer. Use together with -e EDID_HEX=xx to specify custom EDID data.

Raspberry Pi Camera Example

Example usage for the Raspberry Pi v3 camera (required libcamerify which is located in libcamera-tools and libcamera-v4l2 (install both) on Raspbian):

$ sudo modprobe bcm2835-v4l2
$ libcamerify ./ustreamer --host :: --encoder=m2m-image

For v2 camera you can use the same trick with libcamerify but enable legacy camera mode in raspi-config.

Example usage for the Raspberry Pi v1 camera:

$ sudo modprobe bcm2835-v4l2
$ ./ustreamer --host :: -m jpeg --device-timeout=5 --buffers=3 -r 2592x1944

:exclamation: Please note that newer camera models have a different maximum resolution. You can see the supported resolutions at the PiCamera documentation.

:exclamation: If you get a poor framerate, it could be that the camera is switched to photo mode, which produces a low framerate (but a higher quality picture). This is because bcm2835-v4l2 switches to photo mode at resolutions higher than 1280x720. To work around this, pass the max_video_width and max_video_height module parameters like so:

$ modprobe bcm2835-v4l2 max_video_width=2592 max_video_height=1944

Integrations

Janus

µStreamer supports bandwidth-efficient streaming using H.264 compression and the Janus WebRTC server. See the Janus integration guide for full details.

Nginx

When uStreamer is behind an Nginx proxy, its buffering behavior introduces latency into the video stream. It's possible to disable Nginx's buffering to eliminate the additional latency:

location /stream {
    postpone_output 0;
    proxy_buffering off;
    proxy_ignore_headers X-Accel-Buffering;
    proxy_pass http://ustreamer;
}

Tips & tricks for v4l2

v4l2 utilities provide the tools to manage USB webcam setting and information. Scripts can be use to make adjustments and run manually or with cron. Running in cron for example to change the exposure settings at certain times of day. The package is available in all Linux distributions and is usually called v4l-utils.

Here you can find more examples. Documentation is available in man v4l2-ctl.

See also

License

Copyright (C) 2018-2024 by Maxim Devaev mdevaev@gmail.com

This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with this program. If not, see https://www.gnu.org/licenses/.