Awesome

micropython-radio

This repo comprises two protocols for the nRF24L01+ radio module. Each implements a bidirectional link between two radios.

radio-fast

A driver for short fixed-length records. This is a thin layer over the official driver which makes it easier to ensure mutually compatible configurations of the radios. This is done by deploying a common config file to both nodes.

The nRF24L01 provides data integrity but successful reception is not guaranteed as radio outages can occur (see below).

In this protocol one radio acts as master (initiating communications) and the other acts as slave (responding to transmissions)

See README

as_nrf_stream.py

See README

Radio links are inherently unreliable, not least since receiver and transmitter may move out of range. The link may also be disrupted by radio frequency interference. This driver mitigates this by ensuring that, in the event of a link outage, data transfer resumes without loss when connectivity is restored.

The use of uasyncio V3 stream I/O means that the interface matches that of objects such as sockets and UARTs. Objects exchanged are bytes instances, typically terminated by a newline character (b'\n'). Lengths of the bytes objects are arbitrary and are allowed to vary at runtime. Consequently it is easy to exchange Python objects via serialisation libraries such as pickle and ujson.

The underlying protocol's API hides the following details:

1. The radio hardware is half-duplex (it cannot simultaneously transmit and receive).
2. The chip has a 32 byte limit on message length.
3. To address point 1 the protocol is asymmetrical with a master/slave design which is transparent to the user.

The driver provides a symmetrical full-duplex interface in which either node can initiate a transmission at any time. The cost relative to the radio-fast module is some loss in maximum throughput and an increase in latency. Gains are:

• The ability to exchange relatively large, dynamic objects.
• Data integrity with each message being correctly received exactly once.
• A standard bidirectional (full duplex) stream interface.
• Asynchronous code: in the event of an outage communication will inevitably stall for the duration, but other coroutines will continue to run.

Obsolete modules

The as_nrf_stream driver replaces the old radio-pickle and async-radio-pickle modules which pre-dated the uasyncio I/O interface. This module is simpler, smaller and more efficient. Lastly the old asynchronous driver allowed duplicate messages to be received. The new protocol ensures that each record is received exactly once.