Awesome

Vem Tabline

Vem Tabline is a lightweight Vim/Neovim plugin to display your tabs and buffers at the top of your screen using the editor's tabline.

Vem tabline shows the list of open buffers to the left of the top line of the screen and tabs as numbered workspaces to the right.

Vem Tabline is a component of Vem, an alternative command layout for Vim, but it can be used independently from the Vem project.

Features

• Use of Vim's native tabline (no horizontal splits).

• Support for displaying both buffers and tabs simultaneously.

• Possibility of reordering the buffers in the tabline.

• Support for Vim's native commands (no re-mappings necessary —there are key mappings offered by the plugin but they are optional).

• Support to show the buffer number together with its name.

• Mouse support for clicking on both buffers (only Neovim) and tabpage numbers.

• Integration with vim-devicons to show file type icons

• Lightweight, performant and just focused on providing the tabline functionality.

Installation

You can use Vem Tabline right away without additional configuration. Just install the plugin and start using it. You only need to configure it if you want to manually order the buffers in the tabline (explained below) or to show the buffer number together with its name.

You need at least Vim 7.4 or Neovim to use Vem Tabline.

Note: If you don't have set it yet, probably you may want to specify:

set hidden

in your vimrc file so you can switch buffers without having to save their changes before.

Moving Buffers in Tabline

Vem Tabline allows you to change the order in which buffers are shown in each tab. To do so, use the following <Plug> mappings:

• <Plug>vem_move_buffer_left-: Move selected buffer to the left
• <Plug>vem_move_buffer_right-: Move selected buffer to the right

Vim doesn't support ordering buffers natively so if you use :bnext and :bprev, they will not follow the order of buffers in the tabline if you have modified it. To avoid this problem you can use the following mappings:

• <Plug>vem_prev_buffer-: Select previous buffer in tabline
• <Plug>vem_next_buffer-: Select next buffer in tabline

For example you could set your mappings like:

nmap <leader>h <Plug>vem_move_buffer_left-
nmap <leader>l <Plug>vem_move_buffer_right-
nmap <leader>p <Plug>vem_prev_buffer-
nmap <leader>n <Plug>vem_next_buffer-

Where leader is typically set to \ in Vim.

Deleting Buffers

You can use any Vim command to delete or wipeout your buffers. However, if you have reordered them, you'll notice that the next buffer to be displayed is not the next in the tabline, which is not very intuitive. This is because Vim chooses the next buffer to display from its internal buffer list and not from the tabline reordered one. If you want to delete a buffer and get the next one in the tabline selected, use the following keymap:

nmap <leader>x <Plug>vem_delete_buffer-

If the current buffer has unsaved changes, you'll be prompted to confirm.

Quick access to tabs

You may also want to map the numbered keys to quickly access your tabs. To do so, use the following key mappings:

nnoremap <leader>1 :1tabnext<CR>
nnoremap <leader>2 :2tabnext<CR>
nnoremap <leader>3 :3tabnext<CR>
nnoremap <leader>4 :4tabnext<CR>
nnoremap <leader>5 :5tabnext<CR>
nnoremap <leader>6 :6tabnext<CR>
nnoremap <leader>7 :7tabnext<CR>
nnoremap <leader>8 :8tabnext<CR>
nnoremap <leader>9 :9tabnext<CR>

Filetype icons

Vem Tabline integrates with the vim-devicons plugin to show, next to each filename, an icon that displays its file type.

By default, once the plugin is installed, the file type icons will be displayed automatically. You can prevent this behavior by adding: let g:vem_tabline_show_icon = 0 to your vimrc file.

Color Scheme

Vem Tabline uses the default colors of your color scheme for rendering the tabline. However you may change them using the following highlighting groups:

For example, with the following code you can configure your tabline colors using different shades of grey:

highlight VemTablineNormal           term=reverse cterm=none ctermfg=0   ctermbg=251 guifg=#242424 guibg=#cdcdcd gui=none
highlight VemTablineLocation         term=reverse cterm=none ctermfg=239 ctermbg=251 guifg=#666666 guibg=#cdcdcd gui=none
highlight VemTablineNumber           term=reverse cterm=none ctermfg=239 ctermbg=251 guifg=#666666 guibg=#cdcdcd gui=none
highlight VemTablineSelected         term=bold    cterm=bold ctermfg=0   ctermbg=255 guifg=#242424 guibg=#ffffff gui=bold
highlight VemTablineLocationSelected term=bold    cterm=none ctermfg=239 ctermbg=255 guifg=#666666 guibg=#ffffff gui=bold
highlight VemTablineNumberSelected   term=bold    cterm=none ctermfg=239 ctermbg=255 guifg=#666666 guibg=#ffffff gui=bold
highlight VemTablineShown            term=reverse cterm=none ctermfg=0   ctermbg=251 guifg=#242424 guibg=#cdcdcd gui=none
highlight VemTablineLocationShown    term=reverse cterm=none ctermfg=0   ctermbg=251 guifg=#666666 guibg=#cdcdcd gui=none
highlight VemTablineNumberShown      term=reverse cterm=none ctermfg=0   ctermbg=251 guifg=#666666 guibg=#cdcdcd gui=none
highlight VemTablineSeparator        term=reverse cterm=none ctermfg=246 ctermbg=251 guifg=#888888 guibg=#cdcdcd gui=none
highlight VemTablinePartialName      term=reverse cterm=none ctermfg=246 ctermbg=251 guifg=#888888 guibg=#cdcdcd gui=none
highlight VemTablineTabNormal        term=reverse cterm=none ctermfg=0   ctermbg=251 guifg=#242424 guibg=#4a4a4a gui=none
highlight VemTablineTabSelected      term=bold    cterm=bold ctermfg=0   ctermbg=255 guifg=#242424 guibg=#ffffff gui=bold

Multiwindow mode

Vem Tabline offers a mode to show only relevant buffers depending on the layout of the current tabpage:

• In tabs with only one window all buffers are listed.

• In tabs with more than one window, only the buffers that are being displayed are listed.

This allows you to have a cleaner list of buffers depending on the tab that is active and goes well with Vim's philosophy of using tabs as workspaces to arrange windows in different configurations.

To enable this mode, set g:vem_tabline_multiwindow_mode to 1 in your vimrc. See Configuration for more information.

Configuration

The plugin is pretty simple and doesn't require manual configuration. However, there are some parameters that you may want to change. The most important ones are:

g:vem_tabline_show: boolean (default: 1)

The value of this option specifies how the tabline will be shown:

0: never shown
1: shown when there's more than one tab or buffer open
2: always shown

Note: Vim option `showtabline` is used for the same purpose and takes these
same values, however it only checks the number of tabs and ignores the
number of buffers when it is set to 1. Please, use `g:vem_tabline_show`
instead of `showtabline` since the plugin will override the value of the
option to fix this behavior.

g:vem_tabline_multiwindow_mode: boolean (default: 0)

When this mode is active, for layouts of multiple windows in the tabpage,
only the buffers that are displayed in those windows are listed in the
tabline. That only applies to multi-window layouts, if there is only one
window in the tabpage, all buffers are listed.

If this mode is set to 0, all buffers are listed in the tabline regardless
of the window layout.

g:vem_tabline_show_number: string (default: 'none')

Show number in front of each buffer. The possible values are:

    none: no number is shown
    buffnr: Vim's buffer number is shown
    index: displayed buffers are numbered sequentially starting from 1

Check the help file to get more information about how to switch to buffers
using the index number.

For more configuration options, check the Vim help file provided with the plugin.

Credits

There are many plugins to display the buffers in Vim. The design of Vem Tabline is based on two very cool ones: vim-buftabline and WinTabs. It doesn't share code with them but many ideas come from their original authors.

Related projects

• Vem Text Editor: An alternative command layout for Vim.

• Vem Statusline: A light statusline for Vim.

• Vem Dark: A dark color scheme for Vim based on Wombat.