Home

Awesome

ecoinpool

A pool mining software written in Erlang for cryptographic currencies.

Beta Release

This is the first release of ecoinpool and denotes the beta phase of the project. A quite large piece of work has been done to get this from zero to a full-fledged coin pool software, yet not everything is 100% solid and waterproof and some features are missing in this version. Nevertheless, everything you need to get started and give it a try is there.

ecoinpool supports Bitcoin, Bitcoin+Namecoin (merged), Litecoin and Fairbrix.

Contact

ecoinpool is written and maintained by Patrick "p2k" Schneider.

Installing

Follow this guide to install your instance of ecoinpool. The software has been tested on Linux and MacOS X but should also work on Windows. If you really want to use this on Windows, the console instructions might be a bit different; you are on your own there.

Dependencies

ecoinpool only has a few dependencies you have to install yourself. The required Erlang applications are downloaded and compiled later with the help of rebar, the build-tool of my choice, which comes bundled with ecoinpool.

For the following software, you have to consult your operating system's package manager or get a binary release or compile from source.

Bootstrapping

First time installation instructions:

  1. Get ecoinpool's source code by cloning the GIT repository into a folder of your choice.
  2. Open a console, cd into the source folder and run ./rebar get-deps - this will take care of all the Erlang dependencies required by ecoinpool. They will be installed into the "deps" folder which will be created if it doesn't exist.
  3. Run ./rebar compile - this will compile all dependencies and the main applications.
  4. Find and open CouchDB's local config file, usually at /etc/couchdb/local.ini.
  5. Within the [httpd] section, add a line bind_address = 0.0.0.0 in order to allow access from the internet (required if you want to expose the built-in web frontend to your users). Also make sure port 5984 can be reached. If you installed CouchDB from source, you have to allow write access to that ini file from CouchDB's process.
  6. Start CouchDB and browse to its local web frontend at http://<your domain>:5984/_utils/
  7. On the lower right corner it'll say "Welcome to Admin Party!". Click "Fix this" and create an admin account for ecoinpool with a password of your choice. Note it down for later. Optionally create another admin account for yourself.

Configuring and Starting

Before you can start ecoinpool, you have to configure the CouchDB connection. To do that, copy test_launch.config.example to test_launch.config, open it in your favorite text editor and follow the instructions. Ignore the section about the MySQL Replicator for now (full documentation for that has not been written yet).

In case you wonder where to configure the aspects of a pool server, this is done completely through CouchDB and/or the web frontend of ecoinpool. We'll get to this right now.

Start up ecoinpool with ./test_launch.sh - if everything's alright you should see a welcome banner. The software does not daemonize in this beta version. If you want to be able to close your console and keep the server running, you might want to try GNU Screen like this: screen -D -R -S ecoinpool_test ./test_launch.sh

It might be worth knowing that you are on an Erlang console now. You can enter some commands and evaluate expressions (not covered in this readme). All console commands end with a period followed by a newline.

If you like to stop ecoinpool, you can quit via Ctrl+G and entering "q" at the prompt. Alternatively you can hit Ctrl+C and enter "a" or simply kill the process. There is no shutdown procedure required to be run, it's perfectly safe to kill the process at any time. This is called "crash-only design". If you still want to exit ecoinpool gracefully (which, as a little motivation, will send "Server Terminating" as an error message to connected clients) enter q(). at the console.

At this point you might want to configure ebitcoin first. ebitcoin is the block chain monitor/explorer which comes with ecoinpool as an add-on. It enables ecoinpool to listen for block changes instead of polling for the block number five times per second. See the section about "ebitcoin" below.

After you started ecoinpool, head over to the main site at http://<your domain>:5984/ecoinpool/_design/site/_show/home. It should say "This server has been freshly installed and is not configured yet. Fix this.". In case you're no longer logged in on CouchDB (ecoinpool uses CouchDB's user and authentication system), do so by clicking "Login" on the lower right corner. The "Fix this" link will only appear for an admin user. Click it now and you will see the Subpool configuration page.

First, choose the chain type for your pool, then enter a database name e.g. "btc-pool". Make sure to use a different database name than you used for ebitcoin. Next, you can optionally enter a display name which will be shown on the "Home" page instead of the database name.

The "Port" setting denotes the port to which the miners should connect to; ecoinpool will start listening for RPC requests on this port once the Subpool is activated. Set it to 8888 if you don't know which port to choose.

The "Round" setting controls if a round number should be stored along with the shares. On every candidate share (i.e. a share which potentially solves the block) the round number is increased, if enabled. Enter a start value into the text field if you want to use this feature.

The next two fields control ebitcoin's work caching behaviour. If you're just in for a quick test, a cache size of 5 is enough. In other cases, the default value of 20 usually fits all needs for heavy load. ecoinpool is constantly trying to refill the cache as fast as possible and even when the cache runs empty or is disabled it will stay fairly responsive. Be aware that the cache is completely discarded on a block change and subsequently refilled, so don't set this value too high. You can examine the server.log if you want to find an optimal value yourself. Remember, the cache is just a way to deal with simultanous requests. The maximum work age is the time in seconds until cached work will be discarded (this is not the time a miner has to send in valid work). Usually the default is fine, if you're running a pool this won't happen that often anyway.

Next is the CoinDaemon configuration. The options you can set here depend on the selected chain type. Daemons which support local work creation through the getmemorypool call will have two extra fields "Pay To" and "Tag". The former will override the default payout address on block solves; if you leave it empty, ecoinpool will create an account called "ecoinpool" via RPC call and use this one for payout. The other field allows you to add an arbitrary string to the coinbase (max. 20 characters) which will be appended to "eco@". E.g. if you set it to "ozco.in", the coinbase will start with "eco@ozco.in" (greetings fly out to Graet and his team). If you leave it empty, the coinbase will start with just "eco" as a default.

When the Daemon also supports the ebitcoin add-on, another field "ebitcoin Client" will be displayed. It allows to choose from a list of appropriate clients, identified by their database name.

Following the CoinDaemon configuration are the Aux Pool settings. These are used for merged mining (only for Bitcoin), choose the desired chain from the list (currently only NameCoin) and fill out the other fields just like for the main pool. The AuxDaemon configuration panel also behaves in the same way as for the CoinDaemon.

Hit "Save Configuration" above when you're finished with everything. Finally click "Activate Subpool" after the page reloaded and your pool is running. Reward yourself with cake and a hot beverage of your choice for reading this far and getting the thing to run.

Creating Accounts And Workers

Accounts can be created by clicking "Signup" on the lower right corner (when not logged in, of course). Regular users cannot change the pool configuration and inactive Subpools are hidden too. This is enforced by CouchDB's authentication mechanism.

After choosing a Subpool, the "My Workers" page will show up and new Workers can be created by clicking "Add Worker" on the top left corner. A default worker with the same name as the user is created the first time the button is clicked. After that, more workers of the form username_suffix can be created. Passwords are ignored in this beta version, any password will be accepted.

The "My Workers" page will also act as a live monitoring page, one of the most exciting features of ecoinpool.

Updating

The hot code reloading feature is not avaliable during this beta release. For now, it is easier to just restart the server quickly. Just pull the latest changes from the repository, kill the server and launch it again. All changed modules will be recompiled automatically if you use the test_launch.sh script.

ebitcoin

ecoinpool comes bundled with ebitcoin, a block monitor and mini block explorer for bitcoin chains. ebitcoin is configured in the same way as ecoinpool, using a built-in web frontend.

The main site for ebitcoin is at http://<your domain>:5984/ebitcoin/_design/site/_show/home. You will also find a link to ebitcoin within the sidebar of ecoinpool below "Other". If you visit the site for the first time, it should say "This server has been freshly installed and is not configured yet. Fix this.", just like for ecoinpool. Again, you must be logged in to access the configuration.

After clicking the link, you will see the Client configuration page. Choose one of the supported block chains and enter a database name for that chain. You need only one client per chain, so choose a generic name like "btc-chain"; make sure not to use the database name of an existing Subpool. After that, you can optionally enter a display name which will be shown on the "Home" page instead of the database name. Lastly, you can change the host and port of the daemon to which ebitcoin will connect to, but for most cases, the defaults will do.

Be aware that ebitcoin wants to connect to the peer-to-peer port of your daemon, not the RPC port. Also, ebitcoin will "believe" everything the daemon throws at it, no verification is done. That's why it has to be a trusted daemon preferably running on localhost.

Hit "Save Configuration" when you're finished. Finally click "Activate Client" after the page reloaded and ebitcoin will start loading the block chain into its own database. This will take some minutes depending on the chain size. You can follow the process on the console or by looking at the logfiles. Note that block monitoring will not function correctly until the complete chain has been synchronized.

To use a client with ecoinpool, open the Subpool via ecoinpool's web interface. On the configuration tab you can select an ebitcoin client from within the CoinDaemon and the AuxDaemon configuration panel. Only compatible clients will be displayed.

Technical information: In the current implementation, ebitcoin will only store block headers (for Namecoin, this includes the aux proof-of-work).

Troubleshooting: Too Many Open Files (Linux)

While testing the software on a larger pool (big thanks to WKNiGHT of Elitist Jerks) both CouchDB and ecoinpool were pushed beyond the system limits of open file descriptors, resulting in crashes about {error,emfile}. This happens because one file descriptor is required per connection and the default setting is 1024. You can check this, assuming your shell is bash, by running ulimit -n. Additionally, there is a kernel-level limit of file descriptors which you can see with cat /proc/sys/fs/file-max.

To temporarily increase the number of descriptors on the kernel-level you could run echo 65535 > /proc/sys/fs/file-max as root (increasing the limit to 65535 in this example). To make the change survive across reboots, edit /etc/sysctl.conf and add a line fs.file-max = 65535. You may want to set this number even higher, depending on your server load.

For increasing the number of descriptors for the CouchDB and ecoinpool user, you have to edit /etc/security/limits.conf or /etc/limits.conf, depending on your linux distribution. You can either add a line * - nofile 65535 to set this globally for all linux users or add a line for each user replacing the * with a username, e.g. couchdb - nofile 65535 and p2k - nofile 65535. To make these changes take effect, you have to logout and login again. If couchdb was running, restart it too.

Compaction

ebitcoin's block header databases and ecoinpool's share databases can become quite large over time. To leverage the problem of running out of disk space, CouchDB offers a compaction feature which can greatly reduce the needed disk space per database. You can manually trigger the compaction through CouchDB's web frontend by opening the database as admin, clicking "Compact & Cleanup..." on the toolbar, choosing "Compact Database" and clicking "Run". You can watch the compaction process on the status page (within the sidebar menu).

To trigger compaction via a cronjob during off-peak hours, you can use curl like this:

curl -H "Content-Type: application/json" -X POST http://<username>:<password>@localhost:5984/<database name>/_compact

Do this for each block chain or pool database. It is also recommended to run a compaction once ebitcoin has downloaded all block headers of a block chain for the first time.

Compaction can also be triggered by CouchDB itself. Read default.ini on how to do this. This involves copying some sections to local.ini as it is not recommended to change default.ini directly.

Logfiles

ecoinpool keeps a set of logfiles in a folder called "log". They are divided in categories. Each file will auto-rotate if its exceeds reaches 1MB. Some messages are also written to stdout. All logging aspects can be configured in apps/ecoinpool/priv/log4erl.conf and apps/ebitcoin/priv/log4erl.conf.

License

ecoinpool is licensed under the GNU General Public License. See the LICENSE file for details.