Awesome
Cockpit Keyboard
A hot swap system column staggered mechanical keyboard, running QMK Firmware on Pro Micro controllers.
Bill of Materials
Qty | Descript |
---|---|
1 | PCB board |
1 | Arduino Pro Micro |
1 | ProMicro socket 24 pin wide or 2.54 mm pitch female header |
48 | Diode 1N4148 THT |
2 | EC11 Rotary Encoder |
2 | Encoder knob |
46 | MX Compatible Key Switch (3pin or 5pin) |
46 | MX Compatible Keycap (1U) |
13 | M2 Spacer 5mm or 6mm (Standoff ) |
26 | M2 Screw 5mm |
1 | Top Plate (1.2mm aluminium or acrylic) |
1 | Upper Middle Plate (4mm acrylic) |
1 | Lower Middle Plate (3mm acrylic) |
1 | Bottom Plate (2mm or 3mm acrylic) |
1 | Pro Micro Cover (2mm or 3mm acrylic) |
1 | 8 channel WS2812 5050 RGB LED |
1 | Tact Switch 6X6 4mm |
Schematic
Firmware
Link to qmk-fork: https://github.com/ozkan/Cockpit-QMK-config
Link to zmk-fork: https://github.com/ozkan/Cockpit-ZMK-config
Turkey Mechanical Keyboard Community
Telegram: mechistanbul
Thanks
Huge shoutout to Arda Kılıçdağı for tons of advice and help.
<p align="center"> <a href="https://pcbway.com/"><img src="images/PCBWay.png"></a> </p> <p align="center"> <a href="https://pcbway.com" >PCBWay</a> graciously offered to sponsor the prototype build of this keyboard <br> Thanks PCBWay </p>