Awesome

:lock: CIS Debian 10/11/12 Hardening

Modular Debian 10/11/12 security hardening scripts based on cisecurity.org recommendations. We use it at OVHcloud to harden our PCI-DSS infrastructure.

NB : Although Debian 12 CIS Hardening guide is still in development, we do use this set of scripts in production at OVHcloud on Debian 12 Operating Systems.

$ bin/hardening.sh --audit-all
[...]
hardening [INFO] Treating /opt/cis-hardening/bin/hardening/6.2.19_check_duplicate_groupname.sh
6.2.19_check_duplicate_gr [INFO] Working on 6.2.19_check_duplicate_groupname
6.2.19_check_duplicate_gr [INFO] Checking Configuration
6.2.19_check_duplicate_gr [INFO] Performing audit
6.2.19_check_duplicate_gr [ OK ] No duplicate GIDs
6.2.19_check_duplicate_gr [ OK ] Check Passed
[...]
################### SUMMARY ###################
      Total Available Checks : 232
         Total Runned Checks : 166
         Total Passed Checks : [ 142/166 ]
         Total Failed Checks : [  24/166 ]
   Enabled Checks Percentage : 71.00 %
       Conformity Percentage : 85.00 %

:dizzy: Quickstart

$ git clone https://github.com/ovh/debian-cis.git && cd debian-cis
$ cp debian/default /etc/default/cis-hardening
$ sed -i "s#CIS_LIB_DIR=.*#CIS_LIB_DIR='$(pwd)'/lib#" /etc/default/cis-hardening
$ sed -i "s#CIS_CHECKS_DIR=.*#CIS_CHECKS_DIR='$(pwd)'/bin/hardening#" /etc/default/cis-hardening
$ sed -i "s#CIS_CONF_DIR=.*#CIS_CONF_DIR='$(pwd)'/etc#" /etc/default/cis-hardening
$ sed -i "s#CIS_TMP_DIR=.*#CIS_TMP_DIR='$(pwd)'/tmp#" /etc/default/cis-hardening
$ ./bin/hardening/1.1.1.1_disable_freevxfs.sh --audit
1.1.1.1_disable_freevxfs  [INFO] Working on 1.1.1.1_disable_freevxfs
1.1.1.1_disable_freevxfs  [INFO] [DESCRIPTION] Disable mounting of freevxfs filesystems.
1.1.1.1_disable_freevxfs  [INFO] Checking Configuration
1.1.1.1_disable_freevxfs  [INFO] Performing audit
1.1.1.1_disable_freevxfs  [ OK ] CONFIG_VXFS_FS is disabled
1.1.1.1_disable_freevxfs  [ OK ] Check Passed

:hammer: Usage

Configuration

Hardening scripts are in bin/hardening. Each script has a corresponding configuration file in etc/conf.d/[script_name].cfg.

Each hardening script can be individually enabled from its configuration file. For example, this is the default configuration file for disable_system_accounts:

# Configuration for script of same name
status=disabled
# Put here your exceptions concerning admin accounts shells separated by spaces
EXCEPTIONS=""

status parameter may take 3 values:

• disabled (do nothing): The script will not run.
• audit (RO): The script will check if any change should be applied.
• enabled (RW): The script will check if any change should be done and automatically apply what it can.

Global configuration is in etc/hardening.cfg. This file controls the log level as well as the backup directory. Whenever a script is instructed to edit a file, it will create a timestamped backup in this directory.

Run aka "Harden your distro"

To run the checks and apply the fixes, run bin/hardening.sh.

This command has 2 main operation modes:

• --audit: Audit your system with all enabled and audit mode scripts
• --apply: Audit your system with all enabled and audit mode scripts and apply changes for enabled scripts

Additionally, some options add more granularity:

--audit-all can be used to force running all auditing scripts, including disabled ones. this will not change the system.

--audit-all-enable-passed can be used as a quick way to kickstart your configuration. It will run all scripts in audit mode. If a script passes, it will automatically be enabled for future runs. Do NOT use this option if you have already started to customize your configuration.

--sudo: audit your system as a normal user, but allow sudo escalation to read specific root read-only files. You need to provide a sudoers file in /etc/sudoers.d/ with NOPASWD option, since checks are executed with sudo -n option, that will not prompt for a password.

--batch: while performing system audit, this option sets LOGLEVEL to 'ok' and captures all output to print only one line once the check is done, formatted like : OK|KO OK|KO|WARN{subcheck results} [OK|KO|WARN{...}]

--only <check_number>: run only the selected checks.

--set-hardening-level: run all checks that are lower or equal to the selected level. Do NOT use this option if you have already started to customize your configuration.

--allow-service <service>: use with --set-hardening-level. Modifies the policy to allow a certain kind of services on the machine, such as http, mail, etc. Can be specified multiple times to allow multiple services. Use --allow-service-list to get a list of supported services.

--set-log-level <level>: This option sets LOGLEVEL, you can choose : info, warning, error, ok, debug. Default value is : info

--create-config-files-only: create the config files in etc/conf.d. Must be run as root, before running the audit with user secaudit, to have the rights setup well on the conf files.

--allow-unsupported-distribution: must be specified manually in the command line to allow the run on non compatible version or distribution. If you want to mute the warning change the LOGLEVEL in /etc/hardening.cfg

:computer: Hacking

Getting the source

$ git clone https://github.com/ovh/debian-cis.git

Building a debian Package (the hacky way)

$ debuild -us -uc

Adding a custom hardening script

$ cp src/skel bin/hardening/99.99_custom_script.sh
$ chmod +x bin/hardening/99.99_custom_script.sh
$ cp src/skel.cfg etc/conf.d/99.99_custom_script.cfg

Every custom check numerotation begins with 99. The numbering after it depends on the section the check refers to.

If the check replace somehow one that is in the CIS specifications, you can use the numerotation of the check it replaces inplace. For example we check the config of OSSEC (file integrity) in 1.4.x whereas CIS recommends AIDE.

Do not forget to specify in comment if it's a bonus check (suggested by CIS but not in the CIS numerotation), a legacy check (part from previous CIS specification but deleted in more recents one) or an OVHcloud security check. (part of OVHcloud security policy)

Code your check explaining what it does then if you want to test

$ sed -i "s/status=.+/status=enabled/" etc/conf.d/99.99_custom_script.cfg
$ ./bin/hardening/99.99_custom_script.sh

:sparkles: Functional testing

Functional tests are available. They are to be run in a Docker environment.

$ ./tests/docker_build_and_run_tests.sh <target> [name of test script...]

With target being like debian10 or debian11.

Running without script arguments will run all tests in ./tests/hardening/ directory. Or you can specify one or several test script to be run.

This will build a new Docker image from the current state of the projet and run a container that will assess a blank Debian system compliance for each check.
For hardening audit points the audit is expected to fail, then be fixed so that running the audit a second time will succeed.
For vulnerable items, the audit is expected to succeed on a blank system, then the functional tests will introduce a weak point, that is expected to be detected when running the audit test a second time. Finally running the apply part of debian-cis script will restore a compliance state that is expected to be assed by running the audit check a third time.

Functional tests can make use of the following helper functions :

• describe <test description>
• run <usecase> <audit_script> <audit_script_options>
• register_test <test content (see below)>
  • retvalshoudbe <integer> check the script return value
  • contain "<SAMPLE TEXT>" check that the output contains the following text

In order to write your own functional test, you will find a code skeleton in ./src/skel.test.

Some tests ar labelled with a disclaimer warning that we only test on a blank host and that we will not test the apply function. It's because the check is very basic (like a package install) and that a test on it is not really necessary.

Furthermore, some tests are disabled on docker because there not pertinent (kernel modules, grub, partitions, ...) You can disable a check on docker with:

if [ -f "/.dockerenv" ]; then
  skip "SKIPPED on docker"
else
...
fi

:art: Coding style

Shellcheck

We use Shellcheck to check the correctness of the scripts and to respect best practices. It can be used directly with the docker environnment to check all scripts compliancy. By default it runs on every .sh it founds.

$ ./shellcheck/launch_shellcheck.sh [name of script...]

Shellfmt

We use Shellfmt to check the styling and to keep a consistent style in every script. Identically to shellcheck, it can be run through a script with the following:

$ ./shellfmt/launch_shellfmt.sh

It will automatically fix any styling problem on every script.

:heavy_exclamation_mark: Disclaimer

This project is a set of tools. They are meant to help the system administrator built a secure environment. While we use it at OVHcloud to harden our PCI-DSS compliant infrastructure, we can not guarantee that it will work for you. It will not magically secure any random host.

A word about numbering, implementation and sustainability over time of this repository: This project is born with the Debian 7 distribution in 2016. Over time, CIS Benchmark PDF has evolved, changing it's numbering, deleting obsolete checks. In order to keep retro-compatiblity with the last maintained Debian, the numbering has not been changed along with the PDF, because the configuration scripts are named after it. Changing the numbering might break automation for admins using it for years, and handling this issue without breaking anything would require a huge refactoring. As a consequence, please do not worry about numbering, the checks are there, but the numbering accross PDFs might differ. Please also note that all the check inside CIS Benchmark PDF might not be implemented in this set of scripts. We did choose the most relevant to us at OVHcloud, do not hesitate to make a Pull Request in order to add the missing script you might find relevant for you.

Additionally, quoting the License:

THIS SOFTWARE IS PROVIDED BY OVH SAS AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL OVHcloud SAS AND CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

:satellite: Reference

• Center for Internet Security: https://www.cisecurity.org/
• CIS recommendations: https://learn.cisecurity.org/benchmarks

:page_facing_up: License

Apache, Version 2.0