Awesome

Dactyl ManuForm Tight Keyboard

This is a fork of the Dactyl-ManuForm. The Dactyl-Manuform is a fork of the Dactyl with the thumb cluster from ManuForm.

Photos: https://imgur.com/gallery/YePWDY5

Forks

• https://github.com/lebastaq/dactyl-manuform-mini-keyboard

Features

• As small around the keys as possible
• Smoother transition between thumb and fingers (less facets)
• Thicker walls in steep regions where walls were too thin

Generate OpenSCAD and STL models

• Run lein repl
• In the repl run (load-file "src/dactyl_keyboard/dactyl.clj")
• This will regenerate the things/*.scad files
• Use OpenSCAD to open a .scad file.
• Make changes to design, repeat load-file, OpenSCAD will watch for changes and rerender.
• When done, use OpenSCAD to export STL files

Tips

• When trying things out, 10 seconds of rendering time in OpenSCAD is really annoying. Load one of the test outputs with commented out parts that you don't use.
• If you're not sure what things are generted by a piece of code, color them in using something like (color [0.5 0.5 0.5 0.5] (the code)

License

Copyright © 2015-2020 Matthew Adereth, Tom Short, Leo Lou, Okke Formsma

The source code for generating the models is distributed under the GNU AFFERO GENERAL PUBLIC LICENSE Version 3.

The generated models are distributed under the Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA 4.0).