Home

Awesome

ARCHIVED PROJECT, NO FUTURE UPDATES

I appreciate you checking out my old project. A few years ago I was interested in exploring claims made by IPFS and ETH, and this was a toy project I built to experiment with that. I do not plan to update or maintain this project, and I'm leaving it up for historical reasons. Feel free to learn from this repo, but I will not be maintaining this or updating this anylong and I'll be marking it as ARCHIVE.

Original project README below

killcord logo

killcord

v0.0.1

circleci Go Report Card

WARNING This software is in early alpha. Please do not rely on this with your life. Though great care has been taken to ensure that this code is as well structured and straight-forward as possible, it has not undergone proper peer-review and could have both minor and major bugs that undermine the integrity of the system.

Summary

killcord is an early prototype of a censorship resistant dead man's switch for revealing the cryptographic key to a publicly accessible encrypted payload.

killcord relational diagram

killcord leverages:

killcord overview

killcord is designed for a project owner to be able to automatically release a decryption key in the circumstance that the owner stops checking-in after a predefined window of time. This allows an owner to release a secret data dump to the public in the event of death or disappearance.

killcord client (CLI)

To install killcord, you can download precompiled binaries from latest release from the releases tab on github. Once downloaded, move killcord to your path, such as /usr/local/bin/.

If you have go installed, you can install the killcord cli tool by running:

go install github.com/nomasters/killcord/killcord

killcord is a command-line tool meant to run from a personally trusted system. It is the primary interface to either own or watch a killcord project.

killcord projects allow an owner to upload an encrypted payload to IPFS with a globally unique hash that is tied to a smart contract on ethereum. killcord creates unique ipfs and ethereum accounts for each project (one for the contract owner and one for the publisher), and once a small amount of ETH has been added to the newly generated account, it deploys a smart contract closely tied to the owner of the account. Only the account owner is allowed to make writes to all functions on the smart contract, the publisher is only allowed to make writes on the publishedKey function.

The owner can interact with the project, once deployed with:

Running killcord as an owner

With killcord, the project owner has a special status. A project owner controls the initialization, deployment, and updating steps involved in a killcord project.

Killcord projects have all of the configurations contained within the project directory. This includes all account information, secrets, and environmental variables related to the killcord project. This allows you to run multiple killcord projects as an owner or a watcher as you see fit.

To create a new killcord project as an owner, create an empty directory for the project.

$ mkdir my-example-killcord
$ cd my-example-killcord

then you will want to initialize the project that defaults to the ropsten testnet on ethereum.

$ killcord init --dev

This will setup a killcord.toml configuration file that includes 2 new ethereum accounts. The first account is your owner account. This is the account that owns the contract on ethereum and it is tied to the owner project on your personal system. The second account is for your publisher. This is a special account with lower privileges that is only allowed to publish your key to the contract.

Once created, you will be given instructions on the owner and publisher accounts addresses that needs ETH to move forward. You should fund this account with ETH before moving forward.

Since we are running this project on the testnet you can get free ETH to test by installing metamask and requesting some ETH from the MetaMask Ether Faucet.

NOTE: 1 ETH is more than enough to experiment with killcord

Before you continue, check your killcord account balances with the status command

$ killcord status

Once your owner account is funded, you should deploy your contract:

$ killcord contract deploy

This will deploy the smart contract for your killcord project in an incomplete state. A contract needs to be linked to an ipfs encrypted payload before it is ready to be monitored by the publisher.

preparing your payload

The encrypted data payload for killcord utilizes NaCL secretbox to encrypt a single-file payload. This file uses a 256 bit key that is randomly generated and saved inside of the project to be utilized by either the owner or publisher.

Place your files in the payload/source folder in your project. If killcord recognizes multiple files in this directory, it will automatically zip these files for you before encrypting it.

$ killcord encrypt

This command encrypts your data, saves it into the payload/encrypted directory and saves the encryption key to the killcord.toml file.

to test that the payload will decrypt properly, use:

$ killcord decrypt

This will decrypt a payload found in the payload-encrypted directory and save it to the payload-decrypted directory. This should match the contents of the payload-source directory.

Now that we have an encrypted payload, we need to deploy it to ipfs. run:

$ killcord payload deploy

This adds the encrypted payload to ipfs, it writes the ipfs hash to you project configuration. Then, it updates your smart contract so that it is able to reference the IPFS hash as well.

an important consideration about deploying your payload to IPFS

ipfs is a decentralized permanent web. This means that anything posted there has a high likelihood of sticking around permanently. Existentially this means that killcord payloads should be treated very carefully. Payloads that exist should be intended for the public. This can't be overstated.

Reasons that a payload could be decrypted before you intend it to be:

The safest way to think about posting any encrypted payload to IPFS is that it will one day be decrypted. If you are not comfortable with your payload eventually being public, you should not use this tool.

checking in

You now have a fully configured owner account. We still need to configure a publisher that will publish on your behalf in the event that you stop checking in, but first, let's checkin before moving forward:

killcord checkin

This is the primary action the owner will take from this point forward. A checkin engages the smart contract with the owner account. Under the hood, the smart contract grabs the block.timestamp of the block this transaction is part of and writes that timestamp to the lastCheckIn variable. It is important to note that ethereum allows a timestamp drift of up to 900 seconds (15 minutes) by the miner, so it is important to keep this in mind when creating your Publisher, any timestamp can be +/- 15 minutes from reality. By default killcord uses a publish threshold of 48 hours.

check status

You can get your lastCheckin recorded to the block chain at any time by running:

killcord status

killing a contract

killcord contract --kill

This kills the contract. Once a contract is killed, it cannot be undone, the owner would have to start a new project to continue.

an important consideration about killing contracts

It is important to note that though the contract and its variables will no longer be available, analysis tools for the blockchain that can extract variable state. Killing a contract will stop the contract from mutating in the future, but it will not delete old data. Data posted to your killcord contract is permanently stored on the ethereum blockchain.

publish (owner override)

killcord publish

This bypasses the automated publisher and publishes the decryption key for the contract.

configuring a watcher

A watcher is a non-privileged killcord project that downloads a local copy of the encrypted payload and watches the contract for the publication of a secret.

To start a watcher project create a new directory for the project

$ mkdir my-example-killcord-watcher
$ cd my-example-killcord-watcher

Initialize the watcher, since our example above used the testnet we'll use the testnet here as well.

$ killcord watch 0x1dc634148b6d6537e95c26ddaabfc19e0f30e876 --dev

if the payload secret is already written to the contract, killcord will write the secret to the config on project creation, simply run

killcord decrypt

to see the payload.

If the project has not yet published its key, simply run

killcord status

this will give the watcher an update of the contract status, if the key is published, status will write the payload secret to the configuration file and notify the watcher that the secret was published.

configuring the publisher

Currently, this is the least mature part of killcord and requires a bit of manual configuration. This is slated to change over the next few releases, but this section will outline what it will take to get a publisher running.

The publisher requires a subset of values from the killcord.toml to work.

devMode = true             # optional, defaults to false

[payload]
  secret = "SECRET"
  rpcUrl = ""              # optional, defaults to infura

[contract]
  id = "CONTRACT"          
  mode = "testnet"         # optional, defaults to mainnet
  rpcUrl = ""              # optional, defaults to infura
  [contract.publisher]
    address = "HASH"
    password = "PASSWORD"
    keystore = "KEYSTORE"
[publisher]
  warningThreshold = 0     # optional, defaults to 24 hours
  publishThreshold = 0     # optional, defaults to 48 hours

These settings can also be expressed as environmental variables.

Required fields are:

KILLCORD_PAYLOAD_SECRET 
KILLCORD_CONTRACT_ID
KILLCORD_CONTRACT_PUBLISHER_ADDRESS
KILLCORD_CONTRACT_PUBLISHER_PASSWORD
KILLCORD_CONTRACT_PUBLISHER_KEYSTORE

Optional fields are:

KILLCORD_DEV_MODE                       \\ defaults to false
KILLCORD_PUBLISHER_WARNING_THRESHOLD    \\ defaults to 24 hours if not included
KILLCORD_PUBLISHER_PUBLISH_THRESHOLD    \\ defaults to 48 hours if not included
KILLCORD_PAYLOAD_RPCURL                 \\ defaults to infura.io
KILLCORD_CONTRACT_RPCURL                \\ defaults to infura.io

To run the publisher one time from inside of the owner project, you can simply run

killcord publisher run

this runs the publisher and defaults to returning a warning if it has been 24 hours since the last checkin and defaults to publishing the payload secret after 48 hours from the last checkin.

You can manually change these thresholds in the killcord.toml file or by setting the ENV_VARs outlined above.

scheduling the publisher

Once a publisher is configured, the next step will be to schedule its runs. Currently there is no automatic way of doing this, but there are several solutions in the works including easy deploy tools for docker and aws lambda, and they are actively being worked on.

Without any special setups, killcord publisher run can be scheduled with common unix tools such as cron.

Killcord also provides an aws lambda handler, and an example project leveraging apex.run is in the examples/ directory in this repo

Connecting your own ETH and IPFS nodes to killcord

By default killcord uses infura to make connections to ethereum and IPFS effortless, but if you are a more advanced user, you are encouraged to participate in hosting your own decentralized nodes.

There are two ways to wire up custom RPC endpoints

getting involved

If you find this project interesting, I'd love your help. you can reach me on keybase or even better, join the killcord group chat on keybase.