Home

Awesome

License arXiv

Divide and Co-training

Divide and co-training achieve 98.71% on CIFAR-10, 89.46% on CIFAR-100, and 83.60% on ImageNet (SE-ResNet-101, 64x4d, 320px) by dividing one existing large network into several small ones and co-training.

Table of Contents

<!--ts--> <!--te-->

News

Introduction

<div align="justify">

This is the code for the paper <a href="https://arxiv.org/abs/2011.14660"> Towards Better Accuracy-efficiency Trade-offs: Divide and Co-training.</a> <br />

The width of a neural network matters since increasing the width will necessarily increase the model capacity. However, the performance of a network does not improve linearly with the width and soon gets saturated. In this case, we argue that increasing the number of networks (ensemble) can achieve better accuracy-efficiency trade-offs than purely increasing the width. To prove it, one large network is divided into several small ones regarding its parameters and regularization components. Each of these small networks has a fraction of the original one's parameters. We then train these small networks together and make them see various views of the same data to increase their diversity. During this co-training process, networks can also learn from each other. As a result, small networks can achieve better ensemble performance than the large one with few or no extra parameters or FLOPs, \ie, achieving better accuracy-efficiency trade-offs. Small networks can also achieve faster inference speed than the large one by concurrent running. All of the above shows that the number of networks is a new dimension of model scaling. We validate our argument with 8 different neural architectures on common benchmarks through extensive experiments.

</div> <!-- <div align=center> <img src="miscs/fig1_width.png" width="49%"/> <img src="miscs/fig3_latency.png" width="49%"/> </div> --> <div align=center> <img src="miscs/fig2_framework.png" width="100%"/> </div>

Features and TODO

We are open to pull requests.

Results and Checkpoints

CIFAR-10

<div align=center> <img src="miscs/res_cifar10.png" width="50%"/> </div>

CIFAR-100

<div align=center> <img src="miscs/res_cifar100.png" width="100%"/> </div>

ImageNet

Experiments on ImageNet are conducted on a single machine with 8 RTX 2080Ti GPUs or 4 Tesla V100 32GB GPUs.

<div align=center> <img src="miscs/res_imagenet.png" width="100%"/> </div>

COCO val2017

<div align=center> <img src="miscs/coco.png" width="100%"/> </div>

Benchmarks and Checkpoints

Benchmarks and Checkpoints

Installation

Please install PyTorch-1.6.0 and Python3.6+. Only PyTorch-1.6.0+ supports built-in AMP training.

We recommend you to use our established PyTorch docker image: zhaosssss/torch_lab:1.6.2.

docker pull zhaosssss/torch_lab:1.6.2

If you have not installed docker, see https://docs.docker.com/.

After you install docker and pull our image, you can cd to script directory and run

./run_docker.sh

to create a running docker container.

NOTE: We map some directories in run_docker.sh, if you do not have these directories, you need to modify the script. By default, run_docker.sh runs container in background and you need run docker exec -it ${DOCKER-ID} bash to do some interactive operations.

If you do not want to use docker, try

pip install -r requirements.txt

However, this is not suggested.

Prepare data

Generally, directories are organized as following:

${HOME}
├── dataset             (save the dataset) 
│   │
│   ├── cifar           (dir of CIFAR dataset)
│   ├── imagenet        (dir of ImageNet dataset)
│   └── svhn            (dir of SVHN dataset)
│
├── models              (save the output checkpoints)
│
├── github              (save the code)
│   │   
│   └── splitnet        (the splitnet code repository)
│       │
│       ├── dataset
│       ├── model       
│       ├── script           
│       └── utils 
...
# script to extract ImageNet dataset
# ILSVRC2012_img_train.tar (about 138 GB)
# ILSVRC2012_img_val.tar (about 6.3 GB)
# make sure ILSVRC2012_img_train.tar & ILSVRC2012_img_val.tar in your current directory

# 1. Extract the training data:

mkdir train && mv ILSVRC2012_img_train.tar train/ && cd train
tar -xvf ILSVRC2012_img_train.tar && rm -f ILSVRC2012_img_train.tar
find . -name "*.tar" | while read NAME ; do mkdir -p "${NAME%.tar}"; tar -xvf "${NAME}" -C "${NAME%.tar}"; rm -f "${NAME}"; done
cd ..

# 2. Extract the validation data and move images to subfolders:

mkdir val && mv ILSVRC2012_img_val.tar val/ && cd val && tar -xvf ILSVRC2012_img_val.tar
wget -qO- https://raw.githubusercontent.com/soumith/imagenetloader.torch/master/valprep.sh | bash

Training

See script/train_split.sh for detailed information. Before start training, you should specify some variables in the script/train_split.sh.

For example:

You can find more information about the arguments of the code in parser_params.py.

python parser_params.py --help

usage: parser_params.py [-h] [--data DIR] [--model_dir MODEL_DIR]
                        [--arch {resnet34,resnet50,resnet101,resnet110,resnet164,wide_resnet16_8,wide_resnet16_12,wide_resnet28_10,wide_resnet40_10,wide_resnet52_8,wide_resnet50_2,wide_resnet50_3,wide_resnet101_2,resnext50_32x4d,resnext101_32x4d,resnext101_64x4d,resnext29_8x64d,resnext29_16x64d,se_resnet110,se_resnet164,senet154,se_resnet50,se_resnet101,se_resnet152,shake_resnet26_2x96d,pyramidnet272,efficientnetb0,efficientnetb1,efficientnetb2,efficientnetb3,efficientnetb4,efficientnetb5,efficientnetb6,efficientnetb7}]
                        ...
                        [--kl_weight KL_WEIGHT]
                        [--is_kl_weight_warm_up IS_KL_WEIGHT_WARM_UP]
                        [--kl_weight_warm_up_epochs KL_WEIGHT_WARM_UP_EPOCHS]
                        [--is_linear_lr IS_LINEAR_LR]
                        [--is_summary IS_SUMMARY]
                        [--is_train_sep IS_TRAIN_SEP] [--weight_decay W]
                        [--is_wd_test IS_WD_TEST] [--is_div_wd IS_DIV_WD]
                        [--is_wd_all IS_WD_ALL] [--div_wd_den DIV_WD_DEN]
                        [--max_ckpt_nums MAX_CKPT_NUMS]
                        [--is_apex_amp IS_APEX_AMP]
                        [--amp_opt_level AMP_OPT_LEVEL]

PyTorch SplitNet Training

optional arguments:
  -h, --help            show this help message and exit
  --data DIR            path to dataset
  --model_dir MODEL_DIR
                        dir to which model is saved (default: ./model_dir)
  ...
  --max_ckpt_nums MAX_CKPT_NUMS
                        maximum number of ckpts.
  --is_apex_amp IS_APEX_AMP
                        Using NVIDIA APEX Automatic Mixed Precision (AMP
  --amp_opt_level AMP_OPT_LEVEL
                        optimization level of apex amp.

After you set all the arguments properly, you can simply cd to splitnet/script and run

./train_split.sh

to start training.

Monitoring the training process through tensorboard

tensorboard --logdir=your_logdir --port=your_port

# or run script/tensorboard.sh

img_tensorboard

GPU memory usage

For cifar, with mixed precision training, 1 RTX 2080Ti (11GB) is enough to conduct most experiments. For ImageNet, with mixed precision training, 8 RTX 2080Ti (11Gb) or 4 Tesla V100 (32GB) is enough to conduct most experiments.

Evaluation

See script/eval.sh or script/test.sh for detailed information.

You should also specify some variables in the scripts.

Then run

./eval.sh

Citations

@article{shuai2022divide,
  author =   {Shuai Zhao and Liguang Zhou and Wenxiao Wang and Deng Cai and Tin Lun Lam and Yangsheng Xu},
  title =    {Towards Better Accuracy-efficiency Trade-offs: Divide and Co-training},
  journal={IEEE Transactions on Image Processing},
  year = {2022}
}

Licenses

Most of the code here is licensed Apache 2.0. However, this repo contains much third party code. It is your responsibility to ensure you comply with license here and conditions of any dependent licenses.

As for the core code of splitnet (i.e., code about dividing the model and co-training) and the pretrained models, they are under the CC-BY-NC 4.0 license. See LICENSE for additional details. Hope you can understand this because this work is funded by a for-profit company.

Acknowledgements

<!--ts--> <!--te-->

img_cad img_cuhksz img_airs