Home

Awesome

Package Version Hex Docs

An Erlang port interface to libpcap.

epcap includes a small example program called sniff.

QUICK SETUP

$ rebar3 compile

To compile the examples:

$ mkdir -p ebin
$ erlc +debug_info -I _build/default/lib -o ebin examples/*.erl

# Allow your user to epcap with root privs
sudo visudo
youruser ALL = NOPASSWD: /path/to/epcap/priv/epcap
# And if requiretty is enabled, disable it by using one of these
Defaults!/path/to/epcap/priv/epcap !requiretty
Defaults:youruser !requiretty

rebar3 shell

% Start the sniffer process
sniff:start_link().

% Use your interface, or leave it out and trust in pcap
sniff:start([{interface, "eth0"}]).

% To change the filter
sniff:start([{filter, "icmp or (tcp and port 80)"},{interface, "eth0"}]).

% To stop sniffing
sniff:stop().

USAGE

epcap:start() -> {ok, pid()}
epcap:start(Args) -> {ok, pid()}
epcap:start_link() -> {ok, pid()}
epcap:start_link(Args) -> {ok, pid()}

    Types   Args = [Options]
            Options = {chroot, string()} | {group, string()} | {interface, string()} | {promiscuous, boolean()} |
                        {user, string()} | {filter, string()} | {progname, string()} | {file, string()} |
                        {monitor, boolean()} | {cpu_affinity, string()} | {cluster_id, non_neg_integer()}} |
                        {inject, boolean()} | {snaplen, non_neg_integer} | {buffer, non_neg_integer()} |
                        {time_unit, microsecond | timestamp} | {direction, in | out | inout} |
                        {timeout, pos_integer() | infinity | immediate},
                        {env, string()}

    Packets are delivered as messages:

        {packet, DataLinkType, Time, Length, Packet}

    The DataLinkType is an integer representing the link layer,
    e.g., ethernet, Linux cooked socket.

    The Time can be either in microseconds or a timestamp in the same
    format as erlang:now/0 depending on the value of the time_unit
    option (default: timestamp):

    {MegaSecs, Secs, MicroSecs}

    The Length corresponds to the actual packet length on the
    wire. The captured packet may have been truncated. To get the
    captured packet length, use byte_size(Packet).

    The Packet is a binary holding the captured data.

    If the version of the pcap library supports it, the pcap buffer
    size can be set to avoid dropped packets by using the 'buffer'
    option. The buffer size must be larger than the snapshot
    length (default: 65535) plus some overhead for the pcap data
    structures. Using some multiple of the snapshot length is
    suggested. The timeout used when appending subsequent packets
    to the buffer can be controlled by the 'timeout' option on some
    platforms (value in msecs), the special values 'infinity' (wait
    until the pcap buffer is filled) and 'immediate' (do not wait
    after the first packet). The value 0 is equivalent to
    'immediate' which differs from the definition given in pcap(3PCAP).

epcap:send(Ref, Packet) -> ok

    Types   Ref = pid()
            Packet = binary()

    Inject a packet on the network interface. To enable sending
    packets, start_link/1 must be called with the {inject, true} option
    (default: {inject, false}). When disabled, any data sent
    to the epcap port is silently discarded.

    Packet injection failures are treated as fatal errors, terminating
    the epcap port. Partial writes are not considered to be errors
    and are ignored (an error message will be printed to stderr if
    the verbose option is used).

PF_RING

In case you want to compile epcap with PF_RING support, just specify the path to the libpfring and modified libpcap libraries via shell variable PFRING.

PFRING=/home/user/pfring rebar3 do clean, compile

To complete the configuration you need to set up the cluster_id option. The value of the cluster_id option is integer and should be in range between 0 and 255.

epcap:start_link([{interface, "lo"}, {cluster_id, 2}]).

You can also specify the option cpu_affinity to set up CPU affinity for epcap port:

epcap:start_link([{interface, "lo"}, {cluster_id, 2}, {cpu_affinity, "1,3,5-7"}]).

PROCESS RESTRICTIONS

Setting the RESTRICT_PROCESS environment variable controls which mode of process restriction is used. The available modes are:

For example, to force using the seccomp process restriction on linux:

RESTRICT_PROCESS=rlimit rebar3 do clean, compile

The null mode disables process restrictions and can be used for debugging.

RESTRICT_PROCESS=null rebar3 do clean, compile

epcap:start([{exec, "sudo strace -f -s 4096 -o rlimit.trace"}, {filter, "port 9997"}]).

RESTRICT_PROCESS=seccomp rebar3 do clean, compile

epcap:start([{exec, "sudo strace -f -s 4096 -o seccomp.trace"}, {filter, "port 9997"}]).

SCREENSHOT

=INFO REPORT==== 27-Oct-2013::11:47:43 ===
    pcap: [{time,"2013-10-27 11:47:43"},
           {caplen,653},
           {len,653},
           {datalink,en10mb}]
    ether: [{source_macaddr,"F0:BD:4F:AA:BB:CC"},
            {destination_macaddr,"B3:4B:19:00:11:22"}]
    ipv6: [{protocol,tcp},
           {source_address,"2607:F8B0:400B:80B::1000"},
           {destination_address,"2002:26F:92:AE::123"}]
    tcp: [{source_port,80},
          {destination_port,47980},
          {flags,[ack,psh]},
          {seq,686139900},
          {ack,725208397},
          {win,224}]
    payload_size: 567
    payload: "HTTP/1.0 301 Moved Permanently..Location: http://www.google.ca/..Content-Type: text/html; charset=UTF-8..Date: Sun, 27 Oct 2013 15:47:49 GMT..Expires: Tue, 26 Nov 2013 15:47:49 GMT..Cache-Control: public, max-age=2592000..Server: gws..Content-Length: 218..X-XSS-Protection: 1; mode=block..X-Frame-Options: SAMEORIGIN..Alternate-Protocol: 80:quic....<HTML><HEAD><meta http-equiv=\"content-type\" content=\"text/html;charset=utf-8\">.<TITLE>301 Moved</TITLE></HEAD><BODY>.<H1>301 Moved</H1>.The document has moved.<A HREF=\"http://www.google.ca/\">here</A>...</BODY></HTML>.."

And a screenshot of the number of packets epcap is processing on a production system:

IPTraf Screenshot

TODO