Awesome

Deprecated

This library has been deprecated and the 'aiomqtt' name handed over to the project formally known as asyncio-mqtt.

This legacy aiomqtt library will continue to exist via PyPI with versions < 1.0.0 with only essential maintaince on a "best effort" basis and no further development.

New projects are encouraged to try the new qiomqtt project instead which features a much more idiomatic Python API.

aiomqtt (v0.x): An asyncio Wrapper for paho-mqtt

This library implements a minimal Python 3 asyncio wrapper around the MQTT client in paho-mqtt.

Installation:

pip install aiomqtt

You might prefer asyncio-mqtt

Whilst you're welcome to use this library, you're probably better off using asyncio-mqtt intead. asyncio-mqtt is a a really slick and idiomatic asyncio MQTT library (also built on paho-mqtt). As well as being much easier to use, it is also much more actively maintained.

By contrast this library is just 61 SLOC of Python and is intended to be as thin a wrapper around paho-mqtt as possible. It is also maintained on a very limited basis.

API

This library is as thin as possible, exposing the exact same API as the original paho-mqtt Client object with blocking calls replaced with coroutines and all callbacks being scheduled into the asyncio main event loop. It does not attempt to introduce a more idiomatic asyncio API.

When using aiomqtt, refer to the paho-mqtt documentation which applies verbatim with the exception of the above rules. An example use of the library is shown below:

import asyncio
import aiomqtt

loop = asyncio.get_event_loop()

async def demo():
    c = aiomqtt.Client(loop)
    c.loop_start()  # See "About that loop..." below.

    connected = asyncio.Event()
    def on_connect(client, userdata, flags, rc):
        connected.set()
    c.on_connect = on_connect

    await c.connect("localhost")
    await connected.wait()
    print("Connected!")

    subscribed = asyncio.Event()
    def on_subscribe(client, userdata, mid, granted_qos):
        subscribed.set()
    c.on_subscribe = on_subscribe

    c.subscribe("my/test/path")
    await subscribed.wait()
    print("Subscribed to my/test/path")

    def on_message(client, userdata, message):
        print("Got message:", message.topic, message.payload)
    c.on_message = on_message

    message_info = c.publish("my/test/path", "Hello, world")
    await message_info.wait_for_publish()
    print("Message published!")

    await asyncio.sleep(1)
    print("Disconnecting...")

    disconnected = asyncio.Event()
    def on_disconnect(client, userdata, rc):
        disconnected.set()
    c.on_disconnect = on_disconnect

    c.disconnect()
    await disconnected.wait()
    print("Disconnected")

    await c.loop_stop()
    print("MQTT loop stopped!")

loop.run_until_complete(demo())

About that loop...

Unfortunately the author was unable to work out how to integrate paho-mqtt's event loop into asyncio, despite the best efforts of the paho-mqtt authors to make this possible. (Patches are welcome.)

Instead, loop_start() and loop_stop() may be used as normal (and aiomqtt will ensure callbacks arrive in the correct thread) or loop_forever() may be used which in aiomqtt is a coroutine.