Home

Awesome

Shairport Sync

Shairport Sync is an AirPlay audio player for Linux, FreeBSD and OpenBSD. It plays audio streamed from Apple devices and from AirPlay sources such as OwnTone (formerly forked-daapd).

Shairport Sync can be built as an AirPlay 2 player (with some limitations) or as "classic" Shairport Sync – a player for the older, but still supported, AirPlay (aka "AirPlay 1") protocol.

Metadata such as artist information and cover art can be requested and provided to other applications. Shairport Sync can interface with other applications through MQTT, an MPRIS-like interface and D-Bus.

Shairport Sync does not support AirPlay video or photo streaming.

Quick Start

Features

Some features require configuration at build time – see CONFIGURATION FLAGS.md.

Status

Shairport Sync was designed to run best on stable, dedicated, stand-alone low-power "headless" systems with ALSA as the audio system and with a decent CD-quality Digital to Analog Converter (DAC).

Shairport Sync runs on recent (2018 onwards) Linux systems, FreeBSD from 12.1 onwards and OpenBSD. It requires a system with the power of a Raspberry Pi 2 or a Pi Zero 2 or better.

Classic Shairport Sync runs on a wider variety of Linux sytems, including OpenWrt and Cygwin and it also runs on OpenBSD. Many embedded devices are powerful enough to power classic Shairport Sync.

Heritage and Acknowledgements

The functionality offered by Shairport Sync is the result of study and analysis of the AirPlay and AirPlay 2 protocols by many people over the years. These protocols have not been officially published, and there is no assurance that Shairport Sync will continue to work in future.

Shairport Sync is a substantial rewrite of the fantastic work done in Shairport 1.0 by James Wah (aka abrasive), James Laird and others — please see this list of the contributors to Shairport 1.x and Shairport 0.x. From a "heritage" point of view, Shairport Sync is a fork of Shairport 1.0.

For the development of AirPlay 2 support, special thanks are due to:

Much of Shairport Sync's AirPlay 2 functionality is based on ideas developed at the openairplay airplay2-receiver repository. It is a pleasure to acknowledge the work of the contributors there.

Thanks to everyone who has supported and improved Shairport Sync over the years.

More about Shairport Sync

The audio that Shairport Sync receives is sent to the computer's sound system, to a named unix pipe or to STDOUT. By far the best sound system to use is ALSA. This is because ALSA can give direct access to the Digital to Analog Converter (DAC) hardware of the machine. Audio samples can be sent through ALSA directly to the DAC, maximising fidelity, and accurate timing information can be obtained from the DAC, maximising synchronisation. Direct access to hardware is given through ALSA devices with names beginning with hw:.

Synchronised Audio

Shairport Sync offers full audio synchronisation. Full audio synchronisation means that audio is played on the output device at exactly the time specified by the audio source. To accomplish this, Shairport Sync needs access to audio systems – such as ALSA on Linux and sndio on FreeBSD and OpenBSD – that provide very accurate timing information about audio being streamed to output devices. Ideally, Shairport Sync should have direct access to the output device used, which should be a real sound card capable of working with 44,100, 88,200 or 176,400 samples per second, interleaved PCM stereo of 8, 16, 24 or 32 bits. Using the ALSA sound system, Shairport Sync will choose the greatest bit depth available at 44,100 samples per second, resorting to multiples of 44,100 if it is not available. You'll get a message in the log if there's a problem. With all other sound systems, a sample rate of 44,100 is chosen with a bit depth of 16 bit.

Shairport Sync works well with PulseAudio, a widely used sound server found on many desktop Linuxes. While the timing information is not as accurate as that of ALSA or sndio, it is often impractical to remove or disable PulseAudio.

For other use cases, Shairport Sync can provide synchronised audio output to a unix pipe or to STDOUT, or to audio systems that do not provide timing information. This could perhaps be described as partial audio synchronisation, where synchronised audio is provided by Shairport Sync, but what happens to it in the subsequent processing chain, before it reaches the listener's ear, is outside the control of Shairport Sync.

Latency, "Stuffing", Timing

AirPlay protocols use an agreed latency – a time lag or delay – between the time represented by a sound sample's timestamp and the time it is actually played by the audio output device, typically a Digital to Audio Converter (DAC). Latency gives players time to compensate for network delays, processing time variations and so on. The latency is specified by the audio source when it negotiates with Shairport Sync. AirPlay sources set a latency of around 2.0 to 2.25 seconds. AirPlay 2 can use shorter latencies, around half a second.

As mentioned previously, Shairport Sync implements full audio synchronisation when used with ALSA, sndio or PulseAudio audio systems. This is done by monitoring the timestamps present in data coming from the audio source and the timing information coming back from the audio system itself. To maintain the latency required for exact synchronisation, if the output device is running slow relative to the source, Shairport Sync will delete frames of audio to allow the device to keep up. If the output device is running fast, Shairport Sync will insert ("stuff") extra frames to keep time. The number of frames inserted or deleted is so small as to be almost inaudible on normal audio material. Frames are inserted or deleted as necessary at pseudorandom intervals. Alternatively, with libsoxr support, Shairport Sync can resample the audio feed to ensure the output device can keep up. This is less obtrusive than insertion and deletion but requires a good deal of processing power — most embedded devices probably can't support it. If your computer is fast enough, Shairport Sync will, by default, automatically choose this method.

Stuffing is not done for partial audio synchronisation – the audio samples are simply presented at exactly the right time to the next stage in the processing chain.

Timestamps are referenced relative to the source computer's clock – the "source clock", but timing must be done relative to the clock of the computer running Shairport Sync – the "local clock". So, Shairport Sync synchronises the source clock and the local clock, usually to within a fraction of a millisecond. In AirPlay 2, this is done with the assistance of a companion application called NQPTP using a PTP-based timing protocol. In classic AirPlay, a variant of NTP synchronisation protocols is used.