Home

Awesome

DOI

Calibration and regional analysis of Green group trucking model

Summary

This code updates the electricity costing and EV truck emissions+TCS analyses developed by Kariana Moreno Sader and Sayandeep Biswas with operating parameters obtained from PepsiCo's Tesla Semi pilot in California using data published here by NACFE from their 2023 Run On Less pilot. The code used to obtain the operating parameters for the Tesla semi can be found in this repo.

Links to original colab notebook developed by Kariana Moreno Sader and Sayandeep Biswas and associated publication (Moreno Sader et al., 2023).

Please see these slides for a summary of methodology and results obtained with this code.

Install dependencies

To install python3 dependencies needed to run the code:

pip install -r requirements.txt

Install input data files

cd data

# Monthly seasonally adjusted consumer price index, obtained from https://fred.stlouisfed.org/series/CPIAUCSL on May 5, 2024
wget "https://fred.stlouisfed.org/graph/fredgraph.csv?bgcolor=%23e1e9f0&chart_type=line&drp=0&fo=open%20sans&graph_bgcolor=%23ffffff&height=450&mode=fred&recession_bars=on&txtcolor=%23444444&ts=12&tts=12&width=1318&nt=0&thu=0&trc=0&show_legend=yes&show_axis_titles=yes&show_tooltip=yes&id=CPIAUCSL&scale=left&cosd=1947-01-01&coed=2024-03-01&line_color=%234572a7&link_values=false&line_style=solid&mark_type=none&mw=3&lw=2&ost=-99999&oet=99999&mma=0&fml=a&fq=Monthly&fam=avg&fgst=lin&fgsnd=2020-02-01&line_index=1&transformation=lin&vintage_date=2024-05-05&revision_date=2024-05-05&nd=1947-01-01" -O CPIAUCSL.csv

# Historical diesel prices, from https://www.eia.gov/petroleum/gasdiesel/
wget https://www.eia.gov/petroleum/gasdiesel/xls/psw18vwall.xls

cd ..

Check impact of neglecting road grade with uncalibrated model

Run road_grade_comparison.py to check the impact of neglecting road grade on results obtained with the original uncalibrated model:

python source/road_grade_comparison.py

This will produce plots/results_comparison_costing.png and plots/results_comparison_emissions.png that compare the original model results with vs. without road grade information.

Check nominal payload distribution and impact of varying model parameters

The code in semi_parameter_scans.py first evaluates and plots the distribution of best-fitting payloads for the truck model with drag coefficient and frontal area set to the Tesla Semi values of 0.22 and 10.7 m^2. For a single drivecycle (pepsi 1 truck, drivecycle 2), it then performs scans over various model parameters one at a time, evaluating the best-fitting payload at each scan value. The code takes ~15 minutes to run in full (you can comment out unneeded sections to shorten the run time).

To run:

python source/semi_parameter_scans.py

This will produce the following:

You can also check out sample payload fits in plots/truck_model_results_vs_payload_*_drivecycle_*.png

Scan full GVW distributions over combined powertrain efficiency

The code in semi_combined_efficiency_scans_full.py performs a scan over combined powertrain efficiencies, evaluating the fitted GVW over all 20 Tesla Semi drivecycles. By default the rolling resistance is set to 0.0044 for the scan, but it can be modified on this line. The code takes ~10 minutes to run.

To run:

python source/semi_combined_efficiency_scans_full.py

You can then produce box plots of the resulting GW distributions as a function of combined efficiency by running plot_combined_efficiency_scans_full.py:

python source/plot_combined_efficiency_scans_full.py

The resulting plot can be found in plots/gvw_dist_vs_combined_eff.png.

Evaluate straight line approximation of fuel economy as a function of payload

Using the Tesla Semi parameters established from the above analysis, the scripts evaluate_payload_vs_mileage.py and make_payload_vs_mileage_function.py use the Green group's model to evaluate the best-fitting payload for each EV drivecycle, then perform a linear fit of fuel economy vs. payload to approximate a linear functional relationship between these two parameters. The code takes ~1 minute to run.

To run:

# Evaluate the best-fitting payload for each EV drivecycle
python source/evaluate_payload_vs_mileage.py

# Evaluate coefficients for the approximate linear relationship between payload and fuel economy (gal/mile) if the drivecycles were performed by a comparable diesel truck
python source/evaluate_payload_vs_mileage_diesel.py

# Evaluate the best fit relationships for fuel economy vs. payload
python source/make_payload_vs_mileage_function.py
python source/make_payload_vs_mileage_function_diesel.py

This will produce visualizations of the fits in plots/payload_vs_mileage_function.png and plots/payload_vs_mileage_function_diesel.png, along with csv files containing the best-fit linear parameters in tables/payload_vs_mileage_best_fit_params.csv' and tables/payload_vs_mileage_linear_coefs_diesel.csv.

Lifecycle costing and emissions

Evaluate average state diesel prices

Average diesel prices are evaluated for each state using the prior 5 years of historical diesel prices, adjusted by the consumer price index to account for inflation.

To run:

python source/get_diesel_prices_by_state.py

This will produce an output csv file tables/average_diesel_price_by_state.csv.

Validation plots

Lifecycle costing and emissions is performed using the tools contained in costing_tools.py, emissions_tools.py, and tco_emissions_tools.py.

Run validate_costing_and_emissions_tools.py to produce validation plots for the costing and emissions code:

python source/validate_costing_and_emissions_tools.py

This will produce the following plots:

Evaluating regional costs and emissions

The script evaluate_regional_costs_and_emissions.py uses emissions and costing code to evaluate:

The code reads in geojson files containing the boundaries of these balancing authorities and states, along with data on the associated CO2e intensity, electricity price and demand charge.

To download the input geojsons into the geojsons dir:

# From the top level of the repo:
cd geojsons
wget https://mcsc-datahub-files.s3.us-west-2.amazonaws.com/geojsons_simplified/egrid2020_subregions_merged.geojson
wget https://mcsc-datahub-files.s3.us-west-2.amazonaws.com/geojsons_simplified/demand_charges_by_state.geojson 
wget https://mcsc-datahub-files.s3.us-west-2.amazonaws.com/geojsons_simplified/electricity_rates_by_state_merged.geojson 
wget https://mcsc-datahub-files.s3.us-west-2.amazonaws.com/geojsons_simplified/diesel_price_by_state.geojson
cd ..

To run the code:

python source/evaluate_regional_costs_and_emissions.py

This will produce two new files in the geojsons dir called geojsons/costs_per_mile.geojson and geojsons/emissions_per_mile.geojson, which contain the evaluated regional lifecycle costs and emissions per mile. It will also produce the following validation plots: