Home

Awesome

pcap.cr Build Status

Crystal high level bindings for libpcap.

Usage : loop with handler

is a easiest way to read all packets, and loop forever. tcpdump uses this style to capture packets.

require "pcap"

pcap = Pcap::Capture.open_live("eth0")
pcap.setfilter("tcp port 80")
pcap.loop do |pkt|
  if pkt.tcp_data?
    # p pkt.ether_header
    # p pkt.ip_header
    # p pkt.tcp_header
    p pkt.tcp_data.to_s
  end
end
"GET / HTTP/1.1\r\nHost: localhost\r\nUser-Agent: curl/7.47.0\r\nAccept: */*\r\n\r\n"
"HTTP/1.1 200 OK\r\nServer: nginx/1.10.0 (Ubuntu)\r\nDate: Mon, 13 Jun 2016 ...

Usage : reads a packet without blocking

reads a next packet without blocking.

pkt = pcap.next_ex
case pkt
when Pcap::Packet            ; # use pkt as you like
when Pcap::NextError::Timeout; # try again
when Pcap::NextError::Error  ; abort "libpcap error"
when Pcap::NextError::EOF    ; # found only in offline mode
end

is a easiest way to read a packet. This api would block because get? = next_ex + timeout retry.

if pkt = pcap.get?
  puts pkt
else
  abort "EOF reached"
end
22:36:51.327153 IP 127.0.0.1.56903 > 127.0.0.1.6379: Flags [S], seq 3742863884, win 43690, length 0

Status

TODO

Installation

Add this to your application's shard.yml:

dependencies:
  pcap:
    github: maiha/pcap.cr
    version: 0.6.1

And then

$ shards update

Example applications

filtertest

Test a string of pcap-filter.

$ filtertest 'tcp'
$ filtertest 'tcp 80'
syntax error
$ filtertest 'tcp port 80'
$ filtertest -f filter.data # for large string

(As it works, this command will not display any output.)

tcpsniffer

$ crystal examples/tcpsniffer.cr

# (or binary)
$ tcpsniffier -p 6379
$ tcpsniffier -f '(tcp port 80) or (tcp port 8080)' 
$ tcpsniffier -i eth0 -p 10080
12:29:01.445261 IP 127.0.0.1.56016 > 127.0.0.1.80: Flags [S], seq 746220255, win 43690, length 0
12:29:01.445282 IP 127.0.0.1.80 > 127.0.0.1.56016: Flags [SA], seq 4032610561, ack 746220256, win 43690, length 0
further output
$ tcpsniffer -x
12:30:12.305080 IP 127.0.0.1.56018 > 127.0.0.1.80: Flags [S], seq 4253528483, win 43690, length 0
        0x0000:  0000 0000 0000 0000 0000 0000 0800 4500  ..............E.
        0x0010:  003c 8c99 4000 4006 b020 7f00 0001 7f00  .<..@.@.. ......
        0x0020:  0001 dad2 0050 fd87 b1a3 0000 0000 a002  .....P..........
        0x0030:  aaaa fe30 0000 0204 ffd7 0402 080a 092a  ...0...........*
        0x0040:  3d3a 0000 0000 0103 0307                 =:........
$ tcpsniffer -v
--------------------------------------------------------------------------------
Packet Header
  Time         : 2016-06-11 22:42:09 +0900 (1465652529.994580)
  Packet Size  : 68 (total: 74) bytes

Ethernet Header
  Destination eth addr  : 00:00:00:00:00:00
  Source ether addr     : 00:00:00:00:00:00
  Packet type ID        : IPv4 (2048)

IpHeader
  Version         : 4
  Header Length   : 5 words (20 bytes)
  Service Type    : 0
  Total Length    : 60
  Identification  : 4307
  Flags           : 16384
  TTL             : 64
  Protocol        : 6
  Header Checksum : 11239
  Src IP Addr     : 127.0.0.1
  Dst IP Addr     : 127.0.0.1
...
$ tcpsniffer -b -d
17:12:24.261729: "GET / HTTP/1.1\r\nHost: localhost\r\nUser-Agent: curl/7.47.0\r\nAccept: */*\r\n\r\n"
17:12:24.262003: "HTTP/1.1 200 OK\r\nServer: nginx/1.10.0 (Ubuntu)\r\nDate: Mon, 13 Jun 2016 ...
$ tcpsniffer -p 6379 -d -W pcap
16:37:03.683540 IP 127.0.0.1.52182 > 127.0.0.1.6379: Flags [PA], seq 3176296709, ack 3372892385, win 342, length 14
16:37:03.683611 IP 127.0.0.1.6379 > 127.0.0.1.52182: Flags [PA], seq 3372892385, ack 3176296723, win 342, length 7

$ redis-cli ping
PONG

$ ls -l pcap
-rw-r--r-- 1 root root 14 Mar  6 16:37 1.pcap
-rw-r--r-- 1 root root  7 Mar  6 16:37 2.pcap

$ hd pcap/1.pcap
00000000  2a 31 0d 0a 24 34 0d 0a  50 49 4e 47 0d 0a        |*1..$4..PING..|
0000000e

$ hd pcap/2.pcap
00000000  2b 50 4f 4e 47 0d 0a                              |+PONG..|
00000007
replay
# record packets by root with tcpdump
$ tcpdump -i lo -s 0 -w /tmp/redis.dump 'port 6379'

# in other shell
$ redis-cli ping

# stop tcpdump by `Ctl-c`

# reply by tcpsniffer
$ tcpsniffer -r /tmp/redis.dump -p 6379 -b -d
reading from file: /tmp/redis.dump
11:47:14.001208: "*1\r\n$4\r\nping\r\n"
11:47:14.001569: "+PONG\r\n"

Contributing

  1. Fork it ( https://github.com/maiha/pcap.cr/fork )
  2. Create your feature branch (git checkout -b my-new-feature)
  3. Commit your changes (git commit -am 'Add some feature')
  4. Push to the branch (git push origin my-new-feature)
  5. Create a new Pull Request

Contributors