Awesome

tinytuya2mqtt

A bridge between jasonacox/tinytuya and Home Assistant via MQTT.

Leveraging Home Assistant's autodiscovery means there is no configuration required on the HA side. Once this is setup, your devices will just appear, and will be controllable from HA.

┌───────────┐      ┌──────┐      ┌───────────────┐
│ Home      │      │ MQTT │      │ tinytuya2mqtt │
│ Assistant │◀────▶│      │◀────▶│               │
└───────────┘      └──────┘      └──┬────────┬───┘
                                   ┌┘        └──┐
                                   ▼            ▼
                               ┌───────┐    ┌───────┐
                               │ Tuya  │    │ Tuya  │
                               │ Fan   │    │ Light │
                               └───────┘    └───────┘

Running

Ensure tinytuya2mqtt.ini and snapshot.json are in the current directory. Ensure your broker IP has been set in docker-compose.yml:

docker compose up

Or, without docker:

tinytuya2mqtt

Setup

docker compose build

Or, without docker:

python3 -m venv venv && source venv/bin/activate
pip install -e .

Config

Two things are required:

1. snapshot.json
2. tinytuya2mqtt.ini

snapshot.json

Follow the setup process for tinytuya using the wizard which is part of that project. This will create a file snapshot.json which is used by tinytuya2mqtt.

python -m tinytuya wizard

tinytuya2mqtt.ini

Create a tinytuya2mqtt.ini config file, mapping your device pins to the named capabilities. Also ensure to include your MQTT broker hostname. For example:

[broker]
hostname = 192.168.1.198

[device bf7bf4939779bbd9afllck]
fan_state = 1
fan_speed = 3
fan_speed_steps = 1,2,3,4,5,6
light_state = 15
light_brightness = 16
light_brightness_steps = 25,125,275,425,575,725,900,1000
light_temp = 17

[device bf66790922f582082fao6p]
fan_state = 1
fan_speed = 3
fan_speed_steps = 1,2,3,4,5,6

Devices

Device types and capabilities supported by tinytuya2mqtt: