Awesome

irrighino

irrighino is a complete watering system based on Arduino Yun http://www.lucadentella.it/en/2015/08/04/irrighino/

:bulb: New version for Raspberry Pi :bulb:

As Arduino Yun is discontinued, I modified this project to be compatible with Raspberry Pi. Please welcome irrighino Pi!

requirements

If you're using a new Arduino Yun Rev.2 or a Yun Shield, follow the steps in the following post to prepare the board for Irrighino: http://www.lucadentella.it/en/2019/02/02/irrighino-e-yun-rev-2/

An Arduino Yun with the latest firmware and the following modules (you can install them using opkg or through the web interface):

• php5
• php5-cgi
• php5-cli
• php5-mod-curl
• php5-mod-json
• php5-mod-pdo
• php5-mod-pdo-sqlite
• zoneinfo-core
• zoneinfo-europe

The Yun webserver (uhttpd) must be configured to execute php scripts, as explained here: http://www.lucadentella.it/en/2013/12/05/yun-utilizzare-php/

installation

Upload the sketch to the Yun. Copy all the files in the "website" folder to the Yun SD card, in a new folder named "irrighino".

Add the following 3 lines to the crontab ("crontab -e" or through the web interface):

* * * * * /usr/bin/php-cli /www/sd/irrighino/php/irrighinoTask.php

05 00 * * * /usr/bin/php-cli /www/sd/irrighino/php/purgeOldEvents.php

10 00 * * * /usr/bin/php-cli /www/sd/irrighino/php/purgeOldLogs.php

Create the log folder (/var/log/irrighino/)

If you changed the default Yun password ("arduino"), update the include.php file accordingly.

usage

Connect to http://'yun-ip'/sd/irrighino

customize

Edit the include.php file to change the number of outputs, their names and colors. Edit the config.h file to change the PINs led, switches, outputs are connected to.