Home

Awesome

rewrk

A more modern http framework benchmark utility.

F:\rewrk> rewrk -h http://127.0.0.1:5000 -t 12 -c 60 -d 5s

Benchmarking 60 connections @ http://127.0.0.1:5000 for 5 seconds
  Latencies:
    Avg      Stdev    Min      Max    
    3.27ms   0.40ms   1.95ms   9.39ms
  Requests:
    Total:  91281  Req/Sec: 18227.81
  Transfer:
    Total: 1.13 MB Transfer Rate: 231.41 KB/Sec

With optional --pct flag

+ --------------- + --------------- +
|   Percentile    |   Avg Latency   |
+ --------------- + --------------- +
|      99.9%      |     6.88ms      |
|       99%       |     5.62ms      |
|       95%       |     4.62ms      |
|       90%       |     4.24ms      |
|       75%       |     3.78ms      |
|       50%       |     3.49ms      |
+ --------------- + --------------- +

Motivation

The motivation behind this project extends from developers tunnel visioning on benchmarks like techempower that use the benchmarking tool called wrk.

The issue is that wrk only handle some of the HTTP spec and is entirely biased towards frameworks and servers that can make heavy use of HTTP/1 Pipelining which is no longer enabled in most modern browsers or clients, this can give a very unfair and unreasonable set of stats when comparing frameworks as those at the top are simply better at using a process which is now not used greatly.

This is where rewrk comes in, this benchmarker is built on top of hyper's client api and brings with it many advantages and more realistic methods of benchmarking.

Current features

To do list

Usage

Usage is relatively simple, if you have a compiled binary simply run using the CLI.

Example

Here's an example to produce the following benchmark:

CLI command:<br> rewrk -c 256 -t 12 -d 15s -h http://127.0.0.1:5000 --http2 --pct

CLI Help

To bring up the help menu simply run rewrk --help to produce this:

USAGE:
    rewrk.exe [FLAGS] [OPTIONS] --duration <duration> --host <host>

FLAGS:
        --help       Prints help information
        --http2      Set the client to use http2 only. (default is http/1) e.g. '--http2'
        --pct        Displays the percentile table after benchmarking.
    -V, --version    Prints version information

OPTIONS:
    -c, --connections <connections>    Set the amount of concurrent e.g. '-c 512' [default: 1]
    -d, --duration <duration>          Set the duration of the benchmark.
    -h, --host <host>                  Set the host to bench e.g. '-h http://127.0.0.1:5050'
    -t, --threads <threads>            Set the amount of threads to use e.g. '-t 12' [default: 1]

Building from source

Building from source is incredibly simple, just make sure you have a stable version of Rust installed before you start.

With Cargo Install

    • Run cargo install rewrk --git https://github.com/ChillFish8/rewrk.git

With Cargo Run

    • Clone the repo source code
    • Run cargo run --release -- <enter flags here>

With Cargo Build

    • Clone the repo source code
    • Run cargo build --release
    • Extract the binary from the release folder
    • Binary ready to use.