Awesome

LightStep Benchmarks

LightStep Benchmarks is a tool for analyzing the performance of OpenTracing Tracers. It is currently in use to measure the performance of LightStep's legacy Python Tracer and Streaming Python Tracer.

This repo contains two parts: A benchmarking API which can be used to measure the performance of OpenTracing Tracers and a suite of programs which use the benchmarking API to generate performance graphs and run regression tests.

Setup

This setup has been tested on macOS and Ubuntu.

Install Python 3.7 or higher (pip will come installed by default)
Install Google Protobuf. Unfortunately, the Protobuf install is very poorly documented. As of version 3.9.1, these steps work:
- Download and unzip the folder, then enter it
- Run ./configure
- Run sudo make install
- The install has succeeded if protoc --version prints out the Protobuf version.
Download this repo: git clone https://github.com/lightstep/lightstep-benchmarks.git

Now, from the lightstep-benchmarks directory:

(recommended) Create a virtualenv: python3 -m venv lightbench-env and activate it: source lightbench-env/bin/activate
Install development dependencies: pip install -r requirements-dev.txt (you may need to use sudo if you choose not to set up a virtualenv)
Generate Python Protobuf files from .proto files using this script: ./scripts/generate_proto.sh

Getting Started

Let's begin by benchmarking the legacy LightStep Python Tracer, since Python is already installed. We won't worry about setting up mock Satellites for the tracer to send spans to yet. First, make sure you don't have any programs bound to ports 8023 or 8360, because these port will be used during the test. You can check bound ports on Linux with: sudo lsof -i -P -n | grep LISTEN.

Save this code as lightstep-benchmarks/hello_world.py:

from benchmark.controller import Controller

with Controller('python', target_cpu_usage=.7) as controller:
  print(controller.benchmark(
    trace=True,
    spans_per_second=100,
    runtime=10
  ))

From the lightstep-benchmarks directory, run python3 hello_world.py. You should get an output like this:

> controller.Results object:
>   95.3 spans / sec
>   72% CPU usage
>   100.0% spans dropped (out of 499 sent)
>   took 10.2s

Now let's unpack what just happened. The "python" string passed to Controller's constructor tells this controller that it will be benchmarking the legacy Python Tracer. LightStep Benchmarks will test the legacy Python Tracer by running a chunk of instrumented code called a "client program" in different modes and monitoring its performance. The target_cpu_usage=.7 keyword argument tells the controller to calibrate the Python client program so that it uses 70% of a CPU core when a NoOp tracer is running.

On line 4, the benchmark method runs a test using the specified "python" client program. Since trace=True, the legacy Python Tracer will be used instead of the NoOp tracer that was used for calibration. The spans_per_second=100 and runtime=10 arguments specify that the client program should run for about 10 seconds and generate about 100 spans per second.

The benchmark method returns a Result object, which the sample code prints (see sample code output above). As specified, the program took around ten seconds to run and send about 100 spans per second. Because we did not setup any mock Satellites for the tracer to report to, 100% of generated spans were dropped. Recall that the client program was calibrated to use 70% CPU when running a NoOp tracer. Since the test above used 72% CPU, we can assume that the LightStep Python Tracer uses 2% CPU (72% - 70%) when sending 100 spans per second.

Benchmarking the go tracer

To benchmark the go tracer instead:

Build the go client with make go_client
In hello_world.py, replace the 'python' argument to Controller with 'go'
and run python3 hello_world.py again.

Next Steps